thermaltake V250 TG ARGB Tempered Glass ARGB Mid Tower Chassis User Manual

June 4, 2024
thermaltake

thermaltake V250 TG ARGB Tempered Glass ARGB Mid Tower Chassis User Manual
thermaltake V250 TG ARGB Tempered Glass ARGB Mid Tower
Chassis

SPECIFICATION

  • Model: V250 TG ARGB
  • Case Type: Middle towe
  • Chassis Dimension (HWD: 430 x 216.5 x 477 mm (16.9 x 8.52 x 18.78 inch)
  • Side Panel: 4mm Tempered Glass x 1
  • Cooling System: Rear(exhaust): 120 x 120 x 25 mm fan  (1000 rpm, 16 dBA) x 1 Front(intake): 120 x 120 x 25 mm Addressable RGB fan (1000 rpm, 27.2 dBA) x
  • Drive Bays Accessible Hidden: 2 x 3.5“ or 2 x 2.5” (HDD Rack) 2 x 2.5” (HDD Bracket)
  • Expansion Slots: 7
  • Motherboards: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX)
  • I/O Port: 1 x USB 3.0, 2 x USB 2.0, 1 x HD Audi R Button , 1 x
  • Fan Support: Front: 3 x 120 mm, 2 x 140 mm Top: 2 x 120 mm, 2 x 140 mm Rear: 1 x 120 mm
  • Radiator Support: Front: 1 x 280 mm, 1 x 360 mm Top: 1 x 240 mm Rear: 1 x 120 mm
  • Clearance: CPU cooler height limitation: 160 mm VGA length limitation: 320 mm PSU length limitation: 160mm(With HDD Rack), 200mm(Without HDD Rack)

ACCESSORY

Figure Parts Nam Q’ty Used for
Screw M3 x 5mm 25 Motherboard / 2.5” SSD
Screw #6-32 x 5mm 8 3.5” HDD
Screw #6-32 x 15mm 2 3.5” HDD Lock
Screw #6-32 x 6mm 6 Power / VGA
Stand-off #6-32 x 6mm 3 Motherboard
Screw T5 x 12mm 12 Case Fan
Screw #6-32 x 30mm 8 Case Fan
Cable Tie 10 Cable Management
Buzzer 1 Motherboard Alarm

WARNING AND NOTICE

  • CPU Cooler Height Limitation

  • VGA (Add-on card) Length Limitation

Warning!!

CPU Cooler Height Limitation: Please ensure that your CPU cooler does NOT exceed 160 mm (6.3 inches) height. VGA (Add-on card) Length Limitation: Please ensure that your VGA (Add-on card) does NOT exceed 320 mm (12.6 inches) length.

Side Panel Disassembly

Remove the screws on the back of the chassis, and open the side panel.

PSU INSTALLATION

Place the power supply in proper location and secure it with screw

Motherboard Installation

  1. Lay down the chassis.
  2. Install the motherboard in proper location and secure it with screws.

3.5″ & 2.5″ HDD Installation

  • **In front M/B Tray A

**

  • **Behind M/B Tray B

**

PCI Slot Usage

  1. Loosen the screws with a screwdriver.
  2. Install the PCI card in proper location and secure it with screws.

RGB Switch Mode

I/O Port

  • Wave Mode: Mode 1
  • Flow Mode: Mode 2
  • RGB Lighting: Mode 3 (Single Color)
  • Radar Mode: Mode 4~10 (Red, Yellow, Green, Cyan, Blue, White, Purple)
  • Breath Mode: Mode 11~18 (RGB, Red, Yellow, Green, Cyan, Blue, White, Purple)
  • Full Lighted Mode: Mode 19
  • Single Color: Mode 20~26 (Red, Yellow, Green, Cyan, Blue, White, Purple)
  • Light Off: Mode 27

Long press on RGB button for 3 seconds, fan will blink twice which now are controlled by MB software. And vice versa.

How to connect MB

  • ASUS
    Aura Addressable Strip Header(s)

  • MSI
    JRGB-strip Header(S)

  • ASROCK
    Addressable RGB LED Header(s)

  • GIGABYTE
    AORUS RGB Fusion with Digital LEDs

Air Cooling Installation

Installation

Radiator Installation

Installation

Leads Installation

Leads Installation Guide

Case LED Connection / On the front of the case, you can find some LEDs and switch leads. Please consult your user manual of your motherboard manufacturer, then connect these leads to the panel header on the motherboard.

USB 2.0 Connection /

Please consult your motherboard manual to find out the section of “USB connection”.

USB 3.0 connection /

  1. Make sure your motherboard supports USB 3.0 connection.
  2. Connect the USB 3.0 cable to the available USB 3.0 port on your computer.
    Audio Connection /
    Please refer to the following illustration of Audio connector and your motherboard user manual. Please select the motherboard which used AC’97 or HD Audio(Azalia),(be aware of that your audio supports AC’97 or HD Audio (Azalia)) or it will damage your device(s).

**AUDIO HD AUDIO FUNCTION
Installation
USB FUNCTION

**

Thermaltake Power Supply Series (Optional)

What is Smart Power Management (SPM)?

Smart Power Management (SPM) is a cloud based software that seamlessly integrates three intelligent platforms — DPS G PC APP 3.0, DPS G Smart Power Management Cloud 1.0 and DPS G Mobile APP 1.0 — and compiles key statistics about your PC into detailed charts and breakdowns for your instant PC status view and management. With easy access to SPM through your PC or mobile devices, whether you are outside or indoors, enjoy taking full control of your build anytime, anywhere!

Power Supply

Tt RGB Plus Ecosystem

  • Tt RGB Plus Software Thermaltake’s patented software to synchronize TT RGB PLUS products with addressable LEDs.
    Ecosystem

  • Tt Al Voice Control Give you full control over the TT RGB PLUS products with your voice.

Ecosystem

CUSTOMER SUPPORT

Thermaltake has several power supply product lines; please refer to our official website and Facebook Fan Page for more detail information! Brand official website: http://www.thermaltake.com/ Global Facebook :https://www.facebook.com/Thermaltakeinc Taiwan Facebook https://www.facebook.com/ThermaltakeTW




Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

thermaltake User Manuals

Related Manuals