NDTUSMZ 3 in 1 LED Starry Sky Projector Light User Manual

Table of Contents

Please reduce the risk of fire, electric shock or injury when using any appliances.
Please take precautionary measures. These precautions include but not limited to:
Read all detailed instructions.
Be cautious! Please use the product in line with instruction.
The Projector Light is used for indoor. Please do not use outdoors to avoid any damage caused by rain or water.
If the device damaged, please contact the dealer immediately for maintenance. Do not assemble and disassemble the device by yourself.
User cannot disassemble the product by himself. Our Company shall not be liable for any damage caused therefrom.
This product consists of laser, pattern light and ocean wave light. This night light can be projected to a scene of twinkling star, a non-moving moon, and floating clouds. Please do not use laser shone directly in eyes and keep away from children.
Press the touch button will give you better effect when using.

Before Use
Please make sure that all items included essential parts are contained in the package.

USB cable
Projector Light

First Button: Main Switch
Circulate
Press the button to Power On
Ocean wave light on and colors will changed circularly (single color changed circularly & two-toned color changed circularly)
Laser light on： Star twinkling like breathe effect
The moon pattern keep on
Press again to Power Off
Second Button: Control ocean wave light (When product power on)
Circulate
Press button to turn off ocean wave light
Press again to turn the blue light on
Press again to turn the red light on
Press again to turn the green light on
The light colors will changed circularly (single color changed circularly & two-toned color changed circularly)
Third Button: Control laser light and moon pattern (When product power on)
Circulate
Press button to turn laser light and moon pattern on
Press again to turn laser light and moon pattern off
Forth Button: Voice Control Switch（While power on, the
voice control is off at any time, only if you activate the voice control）
Circulate
Press button to turn on voice control mode
Press again to turn off voice control mode
Voice Control Mode: Turn on Voice Control, the light is off. Light will flickering when you speak to this device

Charging Time: Please connect the device from 5V/2A power adapter to the USB cable for charging, can full charged in 1-2 hours.
Operating Time: With built-in 2000mAh lithium battery, it can be used for 2-2.5 hours normally in fully charged status.

We recommend that users can touch the touch switch with thumb on the main unit to ensure accuracy and sensitive.
When the battery completely discharged and auto switch off, please plug in the USB cable to charge and wait till charge 3-5 minutes to power on again.
Press a single touch key over 5 second, please keep waiting over 10 seconds to operating it again.

Laying styles as below

Read User Manual Online (PDF format)