TESSAN TS-WR109 Power Strip with Wireless Charger User Manual

TS-WR109 Power Strip with Wireless Charger
User Manual
Model: TS-WR109

TS-WR109 Power Strip with Wireless Charger

Thank you for purchasing TESSAN Power Strip with Wireless Charger, please read this instruction manual carefully and keep it for future use.

OVERVIEW

FEATURES

1.  2 AC Outlets – Provide ultimate convenience for home appliances, electronics, and more. Rated for 10A, 125V, 1250W.
2. 2 USB Charging Ports – Intelligently detect and charge at the ideal output. Perfect for the camera, smartphone, tablet, Bluetooth speaker, power bank and etc. Does NOT  support Qualcomm Quick Charge.
3. USB Indicator – Let you know the power is active while does not cause bright light in the dark.
4. Non-Slip Pad – 2 long strip anti-slip mats on the bottom keep from slipping and sliding.
5. Fireproof Shell – Made of ABS plastic and PC 94V0, making it fireproof of up to 750℃. The insulating material can protect you from electric shock.
6. Flat Plug – Fits in tight spots behind furniture, bed, nightstand, or couch. 45-degree angled design doesnʼt block the other wall outlet.

COMPATIBILITY

1. The power strip is compatible with most electronic devices up to 1250W. Only apply to the use of low-power household appliances.
2. It can intelligently detect and charge most USB devices at the ideal output. Perfect for the camera, mp3, smartphone, tablet, Bluetooth speaker, power bank, etc.

How to Charge Your Devices

Please Note:

• Phone cases more than 0.2 inch / 0.5 cm thick will not be detected. Remove before charging.
• If charging does not occur, adjust the phone so its receiver can be detected.
• Please check the position of the receiver before charging as the position of the receiver varies from different phone models.

When charging, the LED indicator will light up accordingly.

Note: The indicator may not turn solid Blue on a full charge due to phone settings. Check your phone battery bar to see if it is fully charged. This device only supports  smartphones with wireless charging functionality. If your smartphone does not have wireless charging, you may need to purchase a compatible wireless receiver. However, the compatibility between the wireless receiver and this product is not guaranteed.

Compatible Models:
15W Charging for LG G7/ V30/ V35/ V40
10W Charging for Samsung Galaxy Note 10+/ Note 10/Note8 / Note5 / S9 / S9 Plus S8 / S8+ / S7 / S7 edge / S6 edge+
7.5W Charging for iPhone 12/ 11 Pro/ 11 Pro Max/ XS Max/ XS/ XR/ X/ 8+
5W Charging for Nexus 4 / Nexus 5 / Nexus 6 /
Nokia 9 / Nokia Lumia 920 / 1020 / 928 / Lumia 950xl / 950
HTC 8X / HTC Droid DNA / Rzound

WARNINGS:

1. The power of all devices should not exceed rated power of this Power Strip With Wireless Charger.

2. Do not cover the Power Strip With Wireless Charger with anything to prevent overheat.

3. Do not use it in humid environment.

4. Do not disassemble or modify it by yourself.

5. You cannot charge your device wirelessly in these scenarios:
   using a case with a magnetic / iron plate;
   using a case with a pop socket;
   using an ultra-thick (> 5 mm) protective phone case.

6. Do not place any foreign objects between your device and the wireless chargerʼs surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or  NFC cards, which will make wireless charging fail or cause overheating.

7. Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.

8. High temperatures will reduce charging speed and restrict power, which is a phenomenon common to all wireless chargers. It is recommended that you charge your  device in environments with temperatures below 25°C / 77°F.

9. Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the  wireless charger, the slower the charging speed will be.

10. The supported voltage of this power strip is 125V. This is NOT a voltage converter. A device with a single voltage input will need a converter or transformer to be used  in a location with a non-corresponding power supply voltage, as well as an adapter plug.

SPECIFICATION

Power Strip with Wireless Charger

Model:| TS-WR109
Interface:| 2 Outlets 2USB Ports
Rated Power:| 1250W-10A Max. 125V-
USB Port Output:| DC 5V *2.4A2
USB Total Output:| DC 5V **2.4A 12W Max
Wireless output:| 5W,7.5W,10W,15W Max
Material:| PC+ABS Flame retardant grade 94V0

WARRANTY
We always stand behind our products and would love to offer you 100% satisfaction service, that is why we support all our products with an 18-month warranty and provide  lifetime technical support for all purchase via TESSAN Direct store.
CONTACT
If you have any question or advice about our products, please contact us anytime via support@tessan.com

FCC Caution.
(1)5 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received. including interference that may cause undesired operation.

§ 15.21 Changes or modification warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply nith the limits for a Class B digital device. pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection agamst harmful mterference in a residenual mstallation. This equipment generates uses and can radiate radio frequency energy and. if not installed and used in accordance with the instnictions. may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Inc-rease the separation between the equipment and receiver.
• Connect the equipment nu° an outlet on a circuit different from that to which the receiver s connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for WPT device:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15cm surrotmding the device and 20 cm above the top surface of the device must be respected.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>