TESSAN ESW-1WCA-US 3 Way Smart Dimmer Switch User Manual
- June 5, 2024
- TESSAN
Table of Contents
TESSAN ESW-1WCA-US 3 Way Smart Dimmer Switch
Features
Product Introduction
- Excellent design and high-quality materials to ensure long-term stable and reliable service to users
- Wi-Fi connection has the most applicability and has access to multiple platforms
- Silent mechanical push button design provides the user’s best feedback
Specification
WIRING
Installation
- Disconnect power by circuit breaker
- Check the Line with voltage tester pen, make sure the power is off to prevent electric shock
- Follow the wiring instructions, connect the dimmer wires to each other leads and check for short circuits
- Screw the dimmer into the back box
- Mounting switch cover plate
- Connect circuit breaker restore power
Connection & Operation
- Once connect power correctly, the Green led on the bottom of switch will turn on, switch is ready to serve
- Push on/off button to turn on/off the light
Reset the product:
Press and hold ON/OFF button for 5 seconds then release, Green power indicator will flash, switch get into setup mode, please follow setup instruction to complete setup to start smart function
APP Operation
-
Scan QR code and download the app iOS or Android version
-
Register and log in
The user needs to register by mobile phone number. After registration, you can use this username to log in the APP and proceed to the next step. Support some third-party accounts log in directly. -
Add Devices
After the user login, click the “+” icon in the upper right corner of the main page to enter the add device interface, select the “Switch” menu and click the switch device icon -
Add Devices
To ensure that the new switch power LED is flashing, select the Wi-Fi and enter the password then click Next. -
Add Devices
Wait system to search the device, connect and configure the device will takes up to 3min. Once the device configure successfully, please also input preferred name and select location. -
Control switch with APP
-
Add timer mode in the APP
-
All added devices can be viewed in the main menu of the APP
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device. The
digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). This device
meets the exemption from the routine evaluation limits in section 2.5 of RSS
102 and compliance with RSS 102 RF exposure, users can obtain Canadian
information on RF exposure and compliance. This equipment complies with
Canada radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>