PARAGON PRO 195 T Loader Attachment Owner’s Manual

PARAGON PRO 195 T Loader Attachment

To our valued customers,

Thank you for choosing a product by Manufacturing Solutions. We are pleased that we are able to provide equipment to make your work easier. Our efforts are focused on producing the finest quality equipment of which we are capable. We make sure to spend extra time and effort on our design and production in order to reduce your time and effort spent using the product. We take pride in providing the best for our customers. Quality, innovation, and excellence are all qualities this company ensures. No product is sent without being factory tested and inspected to ensure the highest quality for you. It all began in 1972 when Roland Young designed our first product, the PANELLIFT® Brand Drywall Lift, and revolutionized the drywall industry. To this day we are continuously making advancments in manufacturing and design. Thank you again for giving us the opportunity to work with you. Any questions or comments that you have are always welcome.

Instructional Information

• Use and maintenance of the Cabinetizer ™ Cabinet Lift shall be limited to authorized personnel who are trained in the proper techniques for its safe operation and maintenance and who are familiar with the various hazards of overhead material handling.
• It shall be the resposibility of any and all users of the Cabinetizer ™ Cabinet lift to become familiar and comply with all:
  • aspects of assembly, operation and necessary safety precautions
  • applicable federal, state, and local statutes or regulations.
• The weight capacity of the Cabinetizer™ Cabinet Lift is 300 lbs. (136 kg). DO NOT load the unit beyond this limit. Failure to follow this warning can result in damage to the Cabinetizer™ Cabinet Lift contributing to a sudden failure of the machine and serious property damage and/or serious bodily injury.
• Do Not ATTEMPT TO USE YOUR Cabinetizer™ cabinet Lift IF ANY PART IS MISSING, DAMAGED OR WORN. ORDER A REPLACEMENT PART IMMEDIATELY. Using a Cabinetizer™ Cabinet Lift with missing, damage or worn components can result in failure of the unit and possibly severe property damage and/or serious bodily injury.
• INSPECT THE STRAP BEFORE EACH USE. REPLACE AT THE FIRST SIGN OF WEAR. A worn, damaged or improperly installed strap can fail resulting in a sudden and rapid lowering of the lift and the load and possibly resulting in serious property damage and/or serious bodily injury.
• DO NOT ROLL a loaded Cabinetizer™ Cabinet Lift while the load is raised. Always keep the load lowered until the lift is in place beneath the space in which the cabinets will be installed. Rolling a Cabinetizer™ Cabinet Lift while the load is raised can result in tipping the lift and load possibly resulting in serious property damage and/or serious bodily injury.
• The Cabinetizer™ Cabinet Lift is designed exclusively as a material lift and shall be used for no other purpose. The Cabinetizer™ Cabinet Lift is not a personnel lift or platform and shall not be used as such. DO NOT sit or stand on any part of the Cabiinetizer™. Using the Cabinetizer™ Cabinet Lift for purposes other than material lift can subject the unit to stresses and loads that it was not designed to carry. This can result in failure of the unit which may include a sudden and rapid lowering of the lift and the load possibly resulting in serious property damage and/or serious bodily injury.
• Keep body parts out from under load at all times
• Use the Cabinetizer™ Cabinet Lift only on smooth level surfaces.
• The Cabinetizer™ Cabinet Lift is made of steel which conducts electricity. KEEP THE UNIT AWAY FROM LIVE ELECTRICAL WIRES. Failure to do so could result in electrocution.
• Use only factory-authorized replacement parts. Installation of other parts can compromise the safe design of the Cabinetizer™ Cabinet Lift and may cause failure of the unit possibly resulting in serious property damage and/or serious bodily injury.
• Do not transport an assembled Cabinetizer™ Cabinet Lift.
• Be Observant Of Any Potentially Hazardous Conditions, such as, but not limited to:
  • Any Obstruction
  • Holes
  • Loose Materials
  • Electrical installations
  • Moving Machinery
  • Stairwells
  • Open ducts
  • Changes in floor elevations
  • Wires
  • Etc.
• Before loading Cabinetizer™ Cabinet Lift, BE SURE THE MAIN UPRIGHT BOOM IS firmly secured to the Base and the SPLIT BOOM CONNECTOR is fastened securely.
• Always balance the load on the Cabinetizer™ cabinet Lift. Failure to do so can result in tipping the lift and load possibly resulting in serious property damage and/or serious bodily injury.

INITIAL ASSEMBLY

1. Unpack contents and ensure that you have these items:

   • A. Two Mount Brackets
   • B. 1/4” X 2 1/4” bolts w/ nuts (2)
   • C. Frame Assembly w/ guide wheels & roller pocket
   • D. Winch
   • E. 3 /8” x 1” bolts and nuts (3)
   • F. Cable w/ 1/4” x 1” bolt and nut
   • G. Foot Bracket
     

2. Select the correct mount bracket that corresponds to the model of the PANELLIFT® drywall lift you are using:

   • Bracket “A” is for use with PANELLIFT® drywall lift models 138-2 and 125.
   • Bracket “B” is for use with PANELLIFT® drywall lift models 439 and 460.

3. Attach the bracket to the loader frame using the 1/4” x 2 1/4” bolts and lock nuts.

4. Hang the loader on the PANELLIFT® drywall lift frame.

5. Attach the winch to the loader frame using the 3/8” x 1” bolts with fasteners.
   NOTE: Install the bolts with flat washers from the top down through the winch and fasten the lock washers and nuts from underneath the winch mount plate.

6. Pass the crimped end of the cable over the sheave pocket as shown.

7. Insert the crimped end of the cable through the oblong hole in the winch flange and behind the mooring tab as shown.

8. Pull the stack out of the cable to seat the crimped end securely behind the mooring tab as shown.

9. Rotate the winch handle clockwise to take up the slack in the cable around the winch drum.

10. Push back on the foot bracket latch, insert bracket, and release latch.

11. Insert the cradle on the PANELLIFT® Drywall Lift and you’re ready to lift drywall from floor to ceiling.

OPERATION

1. To load, lift board by one end and place in the foot bracket making sure it is centered on the bracket.
2. Raise the board by rotating the winch handle.
3. When the board is fully raised, swing the cross-arm support hooks under the board.
4. Raise the board off the loader foot bracket by rotating the PANELLIFT® Drywall Lift winch slightly and tilt the board horizontal.
5. Install the board as normal using your PANELLIFT® Drywall Lift.

PARTS INDEX LOADER ATTACHMENT 195 T

PARTS LIST:

Part#                    Description

• 125-206           Cable Sheave w/ Axle & Pins
• 32-20               Stop Bolt w/ Fasteners
• 32-21               Guide Wheel w/ Fasteners
• 32-22               Lift Bracket Rollers
• 32-23               Welded Frame
• 32-24               Foot Bracket
• 32-25               Roller Pocket
• 32-26               Mount Bracket w/ Fasteners 138-2/125
• 32-27               Mount Bracket w/ Fasteners 439/460
• 32-28               Loader Winch w/ Fasteners
• 32-29               Cable 54”
• 32-30               Winch Fasteners (3 nuts, bolts, washers)

ORDER FORM

Copy this order form to place orders.
Phone# 1-800-448-0822 Fax# 1-800-474-9993
E-mail: sales@paragonpromfg.com

SAFETY INFORMATION

This product contains trace amounts of the following items which are known to cause. These chemicals are not hazardous under the product’s intended use. Please review CAS# for more information.

WARRANTY

PARAGON PRO MANUFACTURING SOLUTIONS INC
LIMITED WARRANTY
TELPRO INC products manufactured by PARAGON PRO MANUFACTURING SOLUTIONS INC are warranted to be free from defects in material and workmanship under normal use for one year from date of purchase.

If a TELPRO INC product is proven to be defective in material or workmanship within the covered time frame from the date of purchase, return the defective part to PARAGON PRO MANUFACTURING SOLUTIONS INC and we will either repair or replace the part at our option. We will neither assume nor authorize any other person to assume for us any other liability.
Written notice including commercial invoice detailing the nature of the defect, date of purchase, and the company from which you purchased your unit must be received and acknowledged by PARAGON PRO MANUFACTURING SOLUTIONS INC before any units may be returned. Shipping costs shall be the responsibility of the product purchaser.
This warranty shall not apply to any equipment that has been repaired or altered outside of the factory in any way so as in our judgment to anffect its stability or reliability nor which has been subjected to abuse, misuse, or negligence.
PARAGON PRO MANUFACTURING SOLUTIONS INC reserves the right to make changes or improvements in design without incurring an obligation to install the same on previous units.
PARAGON PRO MANUFACTURING SOLUTIONS INC shall not be liable for loss, damage, or expense directly or indirectly from use of its products, their transportation, their repair, or from any other cause. Acceptance of the manufacturer’s product constitutes agreement to the terms of this warranty and further that the manufacturer shall have no liability for any special or consequential damages.

This Warranty is in lieu of all warranties express or implied.

References

• Custom Solutions, Contract Manufacturing and Telpro Products

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>