CAISSA G-36 Electric with Gel Ball Blaster User Manual
- June 3, 2024
- CAISSA
Table of Contents
CAISSA G-36 Electric with Gel Ball Blaster
Parameters and accessories
BATTERY PRECAUTIONS
- Do not disassemble the battery without permission.
- Please use the matching charging cable provided with the product for charging.
- Only batteries that are the same as or equivalent to the recommended batteries can be used.
- Batteries should never be over-charged. This can damage the cel.Prolonged overcharging causes permanent damage to batteries.
- The power terminals must not be short-circuited.
- Cannot be connected to more than the recommended number of power sources.
- Do not directly hit the battery or throw the battery into the fire.
- The battery should always be fully drained before charging.
- The exhausted battery should be taken out of the model. If it is not used for a long time, please take out the battery from the model.
When batteries have almost lost their charge they can cause gearbox malfunctions that require repair. Only rechargeable batteries distributed by fluorsparblaster can be used. Please note that the battery should not be placed in domestic waste. Proper disposal. Take it to a local store for disposal or take it to an old battery collection site.Any questions about the battery can contact us: support@fluorsparblaster.com
Use and instructions
Luminous mode
In the dark, the special fluor bullet will absorb the light emitted by the gun body and become fluorescent. You can easily see the movement track of the water bullet
Please install the loading funnel in the direction indicated, otherwise the product will be damaged!
Foldable handle
Water gel ball formation process
After loading the bullets, you need to manually press the starting device, and the water bomb will enter the track correctly After use, if there is any remaining water bomb, it needs to be poured out.
Reminder: Please make sure that your water bomb is soaked for3-4 hours to make it big enough to be 7-8mm. If it is not soaked to be 7-8mm, The water bead too small will lead to the phenomenon of jamming!
Troubleshooting
-
Water bombs can’t be shot from the upper supply bottle ?
A: You can try to repair it according to the following steps:- You need to make sure that your water gel ball has been soaked for 3-4 hours and expanded to 7-8mm;
- If the water bomb is normal, and you can try to shake the lower body, then try to shoot;
- If it still can’t be solved, you can remove the bottle to check whether there are water gel balls hanging on the wall of the input pipeline. If there are water gel balls, use a slender stick to pick them off
-
How is the nighttime fluorescent effect achieved?
A: The gun body of Fluorsparblaster is made of special fluorescent material (which has the function of absorbing light and glowing at night), place them under indoor lighting or any light source for a period of time (test confirmation takes about 2-4 minutes, the required time and brightness will depending on the light intensity, we recommend getting as close to the light source as possible for full energy absorption). And it’s worth noting that the longer they’re exposed to light, the longer they glow! a: -
What should I do if the water bomb supply bottle is damaged?
A: The ammunition bottle is relatively fragile, please do not install it with too much force, otherwise the bottle’s mouth will be damaged. Of course, if there is damage, you can also contact customer service to reissue. -
Q: Can’t use it after working for a while?
A: Please rest assured, we provide customers with a 3-month warranty, Please contact our after-sale customer service email (support@fluorsparblaster.com),and we will re-issue a brand new replacement for you within 12 hours!
Attention
- Do not aim at the eyes or face when playing, do not shoot people and animals at close range, do not shoot at fragile targets, be sure to use the projectile provided or recommended by the manufacturer, and it is prohibited to modify the ejection device.
- Do not change the color of the model gun at will or make it more simulated, it should be used within the scope permitted by law.
- Do not use in a dark environment.
- The water-absorbing bomb cannot be frozen or heated, please keep away from fire.
- Do not put the water-abs orbent bomb in your mouth. If you accidentally swallow it, please seek medical help immediately and bring the information (the water-absorbent bomb contains water and sodium polyacrylate cross-linked copolymer).
- Do not use it near your ears.
- The equipped protective glasses cannot provide protection function.
- Regularly check whether the model parts are damaged, and stop using them if they are found to be damaged until the repair is complete. Consumers are requested to consciously abide by the above rules, and the factory will not bear direct or joint responsibility for the adverse consequences caused by violation of any one of the rules. Pictures on the packaging and the actual product is different, please prevail in kind.
WARNING
- This product is a plastic toy that launches water bombs. The launched water bombs will automatically break after hitting the target. It is safe and environmentally friendly and only for entertainment.
- Although the performance of this product is strictly demonstrated and tested to meet the safety standards before mass production, it is prohibited to use it by people under the age of 12.
- Remember that the safety is always off when the toy transmitter is not fired. It is forbidden to shoot this toy at people or other animals.
- Please use this toy launcher in a place that complies with laws and i ulations. Inform consumers to consciously abide by the above rules. The factory will not be directly and jointly liable for the adverse consequences caused by violating any one of the rules.
MONTH WARRANTY POLICY
FluorsparBlaster supports a 3-months unconditional refund and has all days/24 hours) online after-sales email service. If you encounter product damage/lack of parts/or other questions and don’t know how to use it, please contact us via email, and we will reply to you within 24hours to deal with your after- sales problems. Please note that we promise to provide the best customer service to our customers. If you have any product problems, please contact us immediately by email (support@flu-orsparblaster.com, and we will send you an expedited new replocement item.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>