Inwa MZ-608 Portable Wireless Speaker User Manual
- June 1, 2024
- inwa
Table of Contents
Inwa MZ-608 Portable Wireless Speaker
Product Information
Specifications
- Working time: 10 hours
- Standby time: 300 hours
- Bluetooth range: 10 meters
- Rated power: 8W+8W
- Bluetooth version: V5.3
- Battery capacity: 2200mAh
- Charging time: 2-4 hours
- Working voltage: DC 5V 1A
- Frequency response: 20Hz-20KHz
- Waterproof grade: IP67
- Product size: 1617855mm
- Product weight: 330g (with battery)
Product Usage Instructions
Safety Instructions
Read all instructions and save them for future reference. Do not place the
speaker near a heat source or in direct sunlight. Use in a well-ventilated
area.
Package Contents
- MZ-U60se8r’sMPoarntuaablleWireless Speaker
- Speaker Manual
- Charging Line
Product Description
The speaker has various buttons for volume control, track navigation, power
switch/mode, and indicator lights for status updates.
Operation Instructions
- Step 1: Power on the speaker and enter Bluetooth mode. The default volume is 80%.
- Step 2: Connect your phone or Bluetooth device to the speaker named MZ-608.
- Step 3: After successful pairing, the blue indicator light will stay on.
- Step 4: The blue light indicates music playback status.
- Step 5: To connect to a new device, press and hold the pairing button for 3 seconds.
Frequently Asked Questions (FAQ)
-
Q: How do I switch between Bluetooth mode and TF card mode?
A: Short press the power switch/mode button to switch modes during startup. -
Q: What should I do if the speaker enters sleep mode?
A: Press the power switch/mode button to restart the speaker. -
Q: How do I know if the speaker is fully charged?
A: The charging indicator light will turn solid when the speaker is fully charged.
Safety Instructions
- Read all instructions and save them for future reference.
- Do not place it near a heat source.
- Avoid using radiators, stoves, and other equipment that can generate heat.
- Avoid long-term exposure to sunlight and high temperatures.
- This speaker has 2 modes: Bluetooth mode and TF card mode.
- Please note that when Bluetooth is disconnected for 10 minutes, the speaker will enter sleep mode and shut down.
- To restart the speaker, please press the power switch/mode button.
Package Contents
Product Parameters
- Working time: 10hr
- Standby time: ≥300hr
- Bluetooth range: ≤10m
- Rated power: 8W+8W
- Bluetooth version: V5.3
- Battery capacity: 2200mAh
- Charging time: 2-4hr
- Working voltage: DC 5V 1A
- Frequency response: 20Hz-20KHz
- Waterproof grade: IP67
- Product size: 1617855mm
- Product Weight: 330g(with battery)
Product Description
- : Reduce volume/Previous track: Long press the button to decrease volume. Short press the previous button (valid in Bluetooth mode and TF card mode).
- : Play pause/pairing: When the speaker is in Bluetooth connection or TF card mode, short press the button to play/pause; When the speaker is in Bluetooth mode, press and hold the button for 3 seconds to forcibly disconnect the current connection, and double-click to enter the speaker TWS pairing mode.
- : Increase volume/Next track: Long press the button to increase volume. Short press the next button (valid in Bluetooth mode and TF card mode).
- : Power switch/mode: Press and hold for 3 seconds to turn on/off; Short press the button to switch modes during startup.
- Work/charging indicator light (blue/red light)
- SD card interface
- Power interface: DC 5V 1A
Operation Instructions
-
Step 1
Long press and hold the power button “ ” for 3 seconds, there will be a power on prompt sound, entering Bluetooth mode, and the blue indicator light will flash. The speaker will enter the pairing state with the phone’s Bluetooth search, with a default volume of 80%. Every time the speaker is turned on, it will automatically restore the default volume of 80%.
Notice: Inserting a TF card during Bluetooth playback will automatically switch to the TF card playback mode. -
Step 2
Turn on the Bluetooth function on your phone or other Bluetooth device, and then search for a speaker named MZ-608. Connect to the speaker. -
Step 3
After successful pairing, a prompt tone will sound and the blue indicator light will remain on. -
Step 4
The blue indicator light will flash slowly when playing music on the phone, and it will remain on when the music is paused. -
Step 5
How to connect a speaker to a new device:
When connecting the speaker to the device, you can press and hold the pairing button “ ” for 3 seconds to disconnect the current connection and enter the pairing state. Then, the blue indicator light will flash quickly, and the speaker can be connected to the new device. When the Bluetooth status is turned on, it will automatically connect back to the last connected device. If there is no connection, it will shut down after 10 minutes.
Charging Tips
- When the battery is low, the speaker will sound a warning tone and need to be charged.
- The red indicator light remains on during charging but goes off when fully charged.
- It is recommended to charge products with lithium batteries every three months when not in use.
Reset Function
- Press and hold the power button “ ****” for 10 seconds to reset the function. After resetting, it will automatically turn on.
Connect Memory Function
- If the device’s Bluetooth function is turned on, after turning on the speaker, the speaker will automatically connect to the last paired device.
Call Function
- Answer the call: When the speaker is connected to the mobile phone, if there is an incoming call, you can short press the play pause button “ ****” to answer.
- Hang up the call: When the speaker is connected to the phone, you can short press the play pause button “ ****” during the call to hang up.
- Reject call: When the speaker is connected to the phone, you can long press the play pause button “ ****” to reject the call.
TWS
- TWS connection method: Open two speakers, double-click the pairing button “ ” on one of them to enter the TWS mutual connection state, and issue a “dong” to form a TWS team. Then, double-click the pairing button “ ” on the other speaker and issue a “dong” sound, wait for the two speakers to pair with each other. Then, connect the speaker to a Bluetooth device to play music, and the next time speakers are turned on, they will automatically connect.
TF Card Mode
- After inserting the TF card, the speaker will enter TF card mode, and you can short-press the power button “ ****” to switch modes.
- In TF card mode, the blue indicator light will flash slowly when playing music, and it will remain on when the music is paused.
Support Information
Need further help, you can contact us by
- A. Service E-mail: inwa_support@innosystemtech.com
- B. Or contact us on Amazon
- Go to Your Orders.
- Find your order in the list.
- Select Problem with order.
- Choose your topic from list displayed. Select Contact seller.
GOAL REACH CONSULTING LTD OFFICE 1029 3 HARDMAN STREET 10TH FLOOR,
SPINNINGFIELDS MANCHESTER, UK M3 3HF OST UK 20230424000006
goalservice@hotmail.com
We simply act as UK representatives for cross-border sellers and are not
manufacturers/importers/distributors for the product, nor involved in the
manufacture/import/sale of the product.
Therefore, we are not responsible for any after-sales services related to the
product. ln case of any product quality or infringement issues, the
manufacturer/importer/seller shall be solely held responsible.
SUCCESS COURIER SL
CALLE RIO TORMES NUM.1, PLANTA 1,
DERECHA, OFICINA 3, Fuenlabrada,
Madrid, 28947 Spain
OST_EU_20230424000022
successservice2@hotmail.com
We simply act as EU representatives for cross-border sellers and are not
manufacturers/importers/distributors for the product, nor involved in the
manufacture/import/sale of the product.
Therefore, we are not responsible for any after-sales services related to the
product. ln case of any product quality or infringement issues, the
manufacturer/importer/seller shall be solely held responsible.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>