INWA MZ-610 Garden Light Wireless Speaker User Manual

INWA MZ-610 Garden Light Wireless Speaker

GARDEN LIGHT WIRELESS SPEAKER

Safety instructions

• Please read this manual carefully and keep it for future reference.
• Please adjust this product to the appropriate volume to avoid damage to your hearing.
• To reduce the risk of fire and electric shock, do not let this product get wet or wet.
• Do not place this product near the heat source, and avoid the radiator, stove and other equipment that will generate heat.
• Do not plug the opening of this product, and do not put objects into the vent or slot of this product.
• Do not throw to avoid damage to the product due to falling.
•  If the battery is not replaced properly, there is an explosion risk. Only the same type or equivalent type of battery can be replaced.
• No matter what reason the equipment is damaged, it must be repaired by professional maintenance personnel in time. Unauthorized disassembly will invalidate the warranty.

Package content

• Speaker X1
• USB data cable X
• User manual X1

Product parameters

• Working time: 10hr (60% volume)
• Input voltage: DC 5V
• Standby time: ≥300hr
• Bluetooth range : 520m
• Rated power: 8W
• Waterproof grade: I P65
• Frequency response: 20Hz-20KHz
• Battery capacity: 3 600mAh
• Bluetooth version: V5.0
• Charging time: 2 -4hr
• Product size: 1 07^107″210mm
• Product Weight: 4 90g(with battery)

Control panel and interface

1. 0 9% Light color toggle key: Single press to switch in sequence: Turn on the default color: Beat-driven light (flashing light when there is music) → White (not flashing light) → Warm white (not flashing light) → Blue (not flashing light) → Green (not flashing light) → Purple (not flashing light) → Red (not flashing light) → Pink (not flashing light) → Light off
2. Networking pairing key: press and hold for 2 seconds to enter networking status, press and hold for 2 seconds to exit networking status, and double click to force Bluetooth pairing. 3
3. Volume down key: single press for the previous song, long press for volume down.
4. Power on key: single press to play/pause, long press for 2 seconds to switch on.
5. 6 ‡ Volume up key: single press for the next song, long press for volume up.
6. Power interface: DC 5V
7. Master/slave indicator
8. Charge indicator

Bluetooth pairing

1. Step1 Press and hold the power-on key “ for 2 seconds, there will be a prompt tone to enter the Bluetooth pairing status, and the blue light will flash quickly.

2. Step 2 Open the Bluetooth function on the mobile phone or other Bluetooth devices, and click to select “MZ-610” to connect.

3. Step 3 After successful pairing, there will be a prompt tone and the blue light will be on constantly.
   

4. Step 4
   How to connect the speaker to the new device: When the speaker is connected to the device, double-click the networking pairing key ” ” to cut off the current connection and enter the pairing status. The blue light will flash quickly, and the speaker can be connected to the new device.

Synchronous speaker

First networking pairing method

1. Open a speaker first, connect the mobile phone, and the blue light will be on constantly as the Main Speaker.
2.  Turn on the other speakers, long press the networking key “D” for 2 seconds, the red light flashes quickly, speakers will been automatically connected. When connected, the red light will be on constantly as Aux. Speakers.
   Note : If you have not synchronized any speakers, please refer to “Bluetooth pairing” above. Before synchronizing speakers, you need to have the Main Speaker connected to a Bluetooth device. and any speaker can be as Main Speaker.

Note : After two or more speakers are connected successfully, press and hold the networking pairing key “B” of any Aux. speaker for 2 seconds until the blue light flashes quickly to leave the networking mode.

Speaker charging

1. caper ito choring socken plug the Typer catfe of the power
2. Plug the power adapter into the power socket.
3. When charging, the red indicator light is on for a long time; When the red indicator is off it is fully charged

Light display

After the speaker is turned on. Press the light color switch key “ to display the following light in sequence:

1. Beat-driven light (Flashes when there is music)
2. White (no flashing light)
3. Warm white (without flashing)
4. Blue (no flashing light)
5. Green (no flashing light)
6. Purple (no flashing light)
7. Red (no flashing light)
8. Pink (no flashing light)
9. Tum off the light

Note

1. By default, after speaker is turned on, the beat-driven light is enabled.
2. In the light mode 2-8, press and hold the light color switch key ” each time, and adjust the brightness circularly: 100%, 75%, 50%, 25%. Double-dick the light color switch key “” to turn off the light.

Support Information

Need further help, you can contact us by

• Service E-mail: inwa_support@innosystemtech.com
• Or contact us on Amazon

1. Find your or in the lost.
2. Select Problem with order.
3. Choose your topic from list displayed. Select Contact seller.

GOAL REACH CONSULTING LTD OFFICE 1029 3 HARDMAN STREET 10TH FLOOR,

SPINNINGFIELDS MANCHESTER, UK M3 3HF

OST UK 20230424000006 goalservice@hotmail.com We simply act as UK representative for cross-border sellers, and are not manufacturers/importers/distributors for the product, nor involved in the manufacture/import/sale of the product. Therefore, we are not responsible for any after-sales services related to the product. In case of any product quality or infringement issues, the manufacturer/importer/seller shall be solely held responsible.

SUCCESS COURIER SL CALLE RIO TORMES NUM.1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain

OST_EU_20230424000022 successservice2@hotmail.com We simply act as EU representative for cross-border sellers, and are not manufacturers/importers/distributors for the product, nor involved in the manufacture/import/sale of the product. Therefore, we are not responsible for any after-sales services related to the product. In case of any product quality or infringement issues, the manufacturer/importer/seller shall be solely held responsible.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>