inwa MZ-501 Wireless Speaker Installation Guide

June 8, 2024
inwa

MZ-501 Wireless Speaker
INSTALLATION GUIDE

Thank you for buying this product. Please read all safety information and operation instruction before using the bluetooth speaker.

SAFETY INSTRUCTIONS

  • Read all instructions and save them for personal reference in the future.
  • Follow all directions for operating the product.
  • Do not set up near heat sources. Avoid radiators, stoves, and other devices that produce heat. Avoid long-term exposure to sunlight and high temperatures.
  • There are 3 modes for this speaker: Bluetooth Mode, Audio Mode and TF Card Mode.
  • Please note: When the music is paused for 30 minutes, the speaker will enter into Sleep Mode. To restart the speaker, please press Power ON/OFF.

PACKAGE CONTENTS

MZ-501 Wireless Speaker 1
0.6m USB Charging Cable
1
lm Audio Cable 1
Lanyard
1

DIMENSION

inwa MZ-501 Wireless Speaker - fig 1

SPEAKER CONTROL PANEL AND PORTS

inwa MZ-501 Wireless Speaker - fig 2

  1. Volume Down/Previous Song
  2. Power On/Off, Play/Pause Button, Bluetooth Pairing
  3. Lanyard Hole
  4. Built-in Microphone
  5. Volume Up/ Next Song
  6. AUX Input Port
  7. TF Card Slot
  8. Indicator Light
  9. Mirco USB Port: DC 5V/1A

PARAMETER

  • Working Time: 10-12h battery life at 60% volume
  • Stand-by Time: 300 hours
  • Bluetooth Range: 515M
  • Frequency: 20HZ-20KHZ
  • Bluetooth Version: V5.0
  • Charging Lead Time: 2.5-3 hours
  • Work Voltage: 5V / 1A
  • Wattage: 5W
  • IP Rating: IPX7
  • Battery Capacity: 750 mAh

OPERATION INSTRUCTION

Volume Down:
Long press “—” to reduce volume.
Previous Song:
Short press “_” to switch back to the previous song.
Turn On Speaker:
Long press ” ► ” for 1 second till hearing “Power ON”.
Turn Off Speaker:
Long press”►” for 1 second till hearing “Power OFF”.
Bluetooth Pairing
Hold the power Button ‘ ► ” to enter Bluetooth Mode
Pause/Play:
Under the Bluetooth mode and TF card mode, short press to play or pause music. Under AUX audio mode, short press 2 times to play music.
Answer the Call:
When the speaker is connected with phone, the speaker will beep if there is an incoming call. Press the ► to answer the call.
Hang Up the Phone:
Press the ” ► ” to hang up the phone when the speaker is connected with phone.
Reject the Phone Call:
Long Press the ” ► ” to reject the phone call when the speaker is connected with phone.

Volume UP:
Long press “+” to increase volume. When it reaches the Max. volume, you will hear beep sound.
Next Song:
Short press “+” to move to the next song.

MICRO USB CHARGING PORT

Please charge the speakers with the supplied micro USB charging cable and use the DC power adapter that is less than 5V.

inwa MZ-501 Wireless Speaker - fig 5

INDICATOR LIGHT

Charging Instruction:
When the speaker’s battery is low, you will see the red indicator light is flashing and the speaker will automatically shut down. Use the supplied USB cable to charge it. While the speaker is charging, you will see a red indicator light. Once the speaker is fully charged, the indicator light will turn blue.
inwa MZ-501 Wireless Speaker - fig 6 Bluetooth Pairing:
Hold the power button to turn the speaker on. The speaker will automatically enter Bluetooth mode by default. You will hear a voice prompt “Bluetooth Mode” and the blue indicator light will flash quickly. After successfully pairing the speaker will beep and the indicator light will turn blue.

inwa MZ-501 Wireless Speaker - fig 7

TF CARD MODE

You can play music in the TF Card. You can insert a TF or Micro SD card and the speakers will read it automatically. Enjoy your music anytime and anywhere.

inwa MZ-501 Wireless Speaker - fig 8

AUX INPUT MODE

If your device is not bluetooth-enabled, easily connect with TV or other devices via this 3.5 mm audio cable.

inwa MZ-501 Wireless Speaker - fig 9BLUETOOTH MODES

You can pair your device and the speakers as follows:

  1. Hold the ” ► ” to turn the speaker on. The speaker will automatically enter Bluetooth mode by default. You will hear a voice prompt “Bluetooth Mode” and an blue indicator light will flash quickly.

  2. The first time that you pair the speakers and your device, you should turn your device’s Bluetooth function on and search for the speaker. The device will display the speaker’s name MZ -501 “. Tap the speaker’s name and it will automatically pair with your device. After successfully pairing, the speaker will beep and the indicator light will turn blue.

  3. When the speaker and your device has been successfully paired, you can play music through your device and control the music through the speaker. If you want to connect different device with this speaker, short press ” ► ” 2 times to cut the present bluetooth connection. And then follow the above 2 steps to enter bluetooth pairing mode.

inwa MZ-501 Wireless Speaker - fig 11

Note:

  1. For bluetooth connection, please do not insert TF card or connect with audio cable.
  2. When you turn on the speaker, it will automatically search for the device connected recently. If the bluetooth of the device is activated, the speaker will automatically connect and pair. After successfully pairing, you will hear a beep sound.
  3. Bluetooth has an effective communication range of 15 meters. Make sure there are no large obstructions within this range. For the best results, it’s best to use the speaker within 5 meters of your device.
  4. The speaker will automatically turn off in 30 minutes if there is no bluetooth connection or no music played.

inwa MZ-501 Wireless Speaker - fig 12

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals