VIDALITE CE1008607 1-Light 2-Tier Pendant Light Instruction Manual
- June 3, 2024
- VIDALITE
Table of Contents
VIDALITE CE1008607 1-Light 2-Tier Pendant Light
DIMENSIONS
OVERVIEW
Ⓐ Mounting Screw
Ⓑ Mounting Bracket
Ⓒ Canopy
Ⓓ Flat Screw
Ⓔ Lamp holder Subassembly
Ⓕ Upper Lampshade
Ⓖ Lower Lampshade
Ⓗ Snap Ring (Lamp holder)
Ⓘ E26 Bulb
INSTALLATION INSTRUCTIONS
- Turn off the power
- Dismantle mounting bracket subassembly as picture 1,install mounting bracket(B) to J-Box with mounting screws(A).
- Connect the fixture to a suitable ground in accordance with local electrical codes.
- Connect the White wire to the neutral power line wire with a wire nut.
- Connect the Black wire to the hot power line wire with a wire nut.
- Neatly place all wires and wire nut connections inside the canopy(C).
- Install canopy(C) to ceiling with Flat Screws(D).
- Put the Lampshade(F)(G) into the lamp holder subassembly(E),then screw them together with the snap ring(H).
- Screw E26 bulb(I) into the fixture.
- Turn on the power.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>