Miele Fully Integrated Dishwasher Installation Guide
- May 15, 2024
- Miele
Table of Contents
Miele Fully Integrated Dishwasher
Product Information
Specifications
- Model Number : 11 763 180 / 02
- Type : Fully Integrated Dishwasher
- Country-specific Requirement: Only required in Germany
Product Usage Instructions
Installation
- Screw the feet in before moving the dishwasher to avoid damage.
- Ensure door springs are set equally on both sides after fitting the front panel to the door.
- Raise the water drain hose if the on-site drainage connection is lower than the guide path for the lower basket rollers in the open door.
- Use tools required depending on the model for installation.
Safety Instructions
- Do not use a cordless screwdriver to prevent the risk of damage.
- Be cautious of sharp edges. Warning: Danger of being cut.
FAQ
- Q: Do I need to raise the water drain hose during installation?
- A : Yes, if the on-site drainage connection is lower than the guide path for the lower basket rollers in the open door, raise the water drain hose above this level with a bend.
- Q: What tools are required for installation?
- A : Tools required depend on the model. Refer to the specific model’s instructions for the necessary tools.
Installation drawings for fully integrated dishwashers
To avoid the risk of accidents or damage to the dishwasher please observe this installation sheet and read the operating instruction manual supplied with it before it is installed, set up and used for the first time.
See the operating instruction manual.
Risk of damage or fire hazard.
Check connection data.
Screw the feet in before moving the dishwasher
- Do not use a cordless screwdriver, risk of damage.
The door springs must be set equally on both sides after fitting the front panel to the door
Raising the water drain hose
If the on-site drainage connection is situated lower than the guide path for the lower basket rollers in the open door, the water drain hose must be raised above this level with a bend in it.
Warning : Danger of being cut.
TOOLS
- The fittings supplied depend on the model.
- Only required in Germany.
- The tools required depend on the model.
- Optional accessories