my PROJECT Heated Seat Pad Instruction Manual

my PROJECT Heated Seat Pad

Before reading, unfold the page containing illustrations and familiarise yourself with all functions of the product.

INSTALLATION INSTRUCTIONS

1. Control element
2. Slide switch
3. Heated seat pad
4. Fastening straps 2 x
5. Tightening straps 4 x
6. Fastening hooks 4 x
7. 12V plug
8. Coil spring
9. Fuse
10. Plug tip
11. Screw cap

General

Reading and looking after the user manual
This user manual belongs to this heated seat pad. It contains important information concerning ope-ration and handling. Read the user manual carefully, especially the safety instructions, before you use the heated seat pad. Failure to follow this user manual can result in serious personal injury or damage to the heated seat pad. The user manual is based on the standards and regulations valid in the European Union. You must also observe the country-specific guidelines and laws when abroad. Keep the user manual safe for further use.

Important instructions. Keep for future reference.
If you pass on the heated seat pad to a third party, you must also pass on this user manual with it.

Explanation of symbols
The following symbols and signal words are used in this user manual, on the heated seat pad or on the packaging. This signal symbol/word indicates a hazard with a high level of risk, which will result in death or serious injury, if not avoided. This signal symbol/word indicates a hazard with a medium level of risk, which can result in death or This signal symbol/word indicates a hazard with a low level of risk, which moderate or minor injury, if not avoi-This signal symbol/word warns against potential damage to property.Must not be used by very young children (0-3 years) Device protection class III Do not insert needles Do not fold or use in a pushed-together condition.

Safety

Intended use
The heated seat pad is designed exclusively for heating of persons while driving. It is intended solely for private use and is not suitable for the commercial sector. Use the heated seat pad only as described in this user manual. Any other use is considered to be improper and may result in damage to property or even personal injury. The heated seat pad is not a toy. The manufacturer or dealer will not accept liability for damage caused by improper or incorrect use.

Safety instructions
Faulty attachment of the heated seat pad can prevent/distort the discharge of the seat airbag in case of a collision.

• Use the heated seat pad only in such a way that
•  Strictly follow this user manual when attaching the heated seat pad.
•  Reposition the heated seat pad when shifted. If this is no longer possible due to deformation or advanced wear, remove the heated seat pad.

Danger of electric shock!Faulty electrical installation or excess supply volta-ge may cause an electric shock.

•  Only connect the heated seat pad to a 12V electrical power socket of a vehicle (cigarette lighter).
•  Ensure that the 12 V vehicle power socket is always easily accessible, so that you can quickly disconnected the power cable in the case of accident or malfunction.
•  Do not operate the heated seat pad if it has been visibly damaged or the connecting cable or the 12V plug is defective.
•  If the power cable of the heated seat pad is damaged, it must be replaced by the manufac-turer or its service agent or a similarly qualified person, to avoid danger.
• Do not open up the heated seat pad but refer to a qualified servicing technician. Use a specialist workshop for this. Liability and warranty claims are excluded for repairs conducted independently, and for improper connection or incorrect operation.
• When carrying out repairs, only parts may be used which comply with the original unit speci-fications. There are electrical and mechanical parts in this heated seat pad, which are essential to protect against sources of hazard.
• Do not immerse either the heated seat pad or the power cable or plug in water or other liquids.
•  Never grasp the 12V plug with wet hands.
•  Never pull the 12V plug from the 12 V vehicle power socket with the power cable, but always grip it directly.
•  Never use the power cord as a carrying handle.
•  Keep the heated seat pad, the 12V plug and power cable away from open flames and hot surfaces.
•  Do not bend the power cable and do not place it over sharp edges.
•  Use the heated seat pad only in the interior of vehicles. Never operate it in the rain.
•  Ensure that children do not push objects into the heated seat pad.
•  If you are not using the heated seat pad, or cleaning it, or if an error occurs, turn the heated seat pad off and pull the 12V plug from the 12V
•  Children younger than 3 years must not use the heated seat pad because they are unable to respond to overheating.
•  Children older than 3 years are allowed to use the heated seat pad only if a parent or guardian has preset the control element or the child has been sufficiently instructed in how to safely ope-rate the regulating and/or control unit.
•  This heated seat pad can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are under supervision or have been given instruction concerning the safe use of the heated seat pad and understand the resulting risks. Children must not play with the heated seat pad. Cleaning and user maintenance shall not be undertaken by children without supervision.
• Do not leave the heated seat pad unattended during operation.
• Do not let children play with the packaging film. They can get caught up in packaging and suffo-cate while playing.

Fixing the heated seat pad

Risk of injury!Improper installation of heated seat pads may result in injury. Fix the heated seat pad and the power cable so that the driver‘s freedom of movement is not restricted.

1.  Place the heated seat pad 3 on the car seat.
2.  Be sure to check that the heated seat pad does
3.  Attach the heated seat pad with the fastening straps 4 on the backrest of the car seat.
4.  Fix the heated seat pad by anchoring the tigh-tening straps 5 and fastening hooks 6 to the seat surface.
5.  Make sure that the power cable is never pinched.

Operating the heated seat pad Use heated seat pad only with the engine running.

1.  Plug the 12V plug 7 into the 12V vehicle power socket.
2.  Now select the desired heating level, by setting the slide switch 2 either to „LOW“ (35-45°C) or „HIGH“ (40-50°C). The power LED will light up.
3. Turn off the heated seat pad by setting the slide switch to „OFF“.
4. Then unplug the 12V plug from the 12V vehicle power socket.

Cleaning

•  Do not use abrasive cleaners, brushes with metal or nylon bristles and sharp or metallic cleaning objects such as knives, scrapers and the like. This will damage the surface.
• Never put the heated seat pad in the washing machine.

1.  Before cleaning unplug the 12V plug from the 12V vehicle power socket.
2.  Let the heated seat pad cool completely.
3.  Wipe the heated seat pad off with a slightly damp cloth.
4. Allow all parts to dry completely afterwards.

Maintenance

Only use replacement fuses with the specified technical data. There is a fuse in the 12V plug to protect the elec-trical system of the vehicle. Check and replace the fuse when the heated seat pad no longer works

1.  Unscrew the screw cap 11 counter clockwise from the 12V plug 7 .
2.  Remove the plug tip 10 .
3.  Remove the fuse 9 .
4.  Insert a new glass tube fuse (F4AL250V) onto
5.  Place the plug tip back on top of the new fuse.
6.  Turn the screw cap clockwise to the 12V connec-to

Storage

•  Allow the heated seat pad to cool completely.
•  Store the heated seat pad in a clean, dry place.
•  Keep the heated seat pad out of reach for child-ren.
•  Avoid that the heated seat pad is kinked during storage by heavy objects being placed on it.
•  Do not weigh down the heated seat pad with heavy objects.

Troubleshooting

For faults not listed here, please contact the manu-facturer.

power socket correctly.
There is no vol- tage at the 12V vehicle power socket.| In many vehicles, the ignition must be turned on for the 12V vehicle power socket to be live.
The ignition is switched on but the heated seat pad does not work.| The 12V electri- cal power socket fitting is dirty. The contact is therefo- re interrupted| Clean the 12V vehicle power socket properly.
The fuse of the 12V plug has blown.| Replace the fuse of the 12V plug, see section Maintenance.
The vehicle fuse has blown| Replace the vehicle fuse for the 12V vehicle po- wer connector. Please refer to the handbook for your vehicle.

Technical data

• Model :/17175 (Clix I)
• External material :/Polyester and polypropylene
• Internal material :/Polyurethane foam and Polyes-
• Temperature max.:/50° C
• Power rating :/29,0 W (Low: 24 W,
• Power supply :/High: 29 W)
• Protection class :/12V
• Fuse : III

This heated seat pad has been tested by TÜV-TÜV Rhein-land Group (TÜV Kraftfahrt GmbH. Institute for Traffic Sa-fety, Type testing vehicles/vehicle parts, Am Grauen Stein, 51105 Cologne). Suitability for side airbags rated and tested in comparison with series production. See application range (type list) and technical report no. 83SG0170. Retrieve under www.walsergroup.com/clix

Declaration of Conformity
The EU declaration of conformity can be requested from the manufacturer.

Disposal

Disposal of packaging
Dispose of the packaging separated by type. Put paper board and cardboard in paper recy-cling, and plastic films in material recycling.

Disposal of old appliances
(Applicable in the European Union and other European countries with systems for separate collection of recycla-bles) appliances separately from household waste, e.g. at a collection site in his community/city district. This ensures that old appliances are properly used and negati-ve effects on the environment are avoided. Therefore, elec-trical and electronic equipment is marked with the above symbol.

Manufacturer

• Walser GmbH
• Radetzkystraße 114
• 6845 Hohenems
• Österreich
• office@walsergroup.com
• User manual status 20.04.2021

Service & Guarantee

This product has been produced with great care and under continuous quality control. The product comes with a three year guarantee from date of purchase. Please keep your receipt safe. The guarantee applies only to material and manufacturing defects and does not apply to misuse or improper treatment. Your statutory rights, especially the rights of warranty, are not restricted by this guarantee. Extent of validity: Please use the service hotline which has been provided for you or contact the service centre in the European Economic Area.

Costs: Repair or replacement free of charge or a refund of the purchase cost. Shipping costs will not be charged.

Advisory notice: Before returning your product, contact our hotline by telephone, so that we can help you with any operating errors.

Service address:
Walser Industrie- und Handels GmbH
office@walsergroup.com
www.walsergroup.com

Free Service Hotline: 00800 00300030

Return address: Walser Customer Service Germany Walser GmbH Bleicheweg 15, Postfach 3325 DE-88131 Lindau GERMANY IAN 367334_2101

References

• WALSER - Nur das Beste für Ihr Auto
• Clix - WALSERGROUP

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>