SPERRY MC1011 Goburst Wireless Pro Controller Instructions
- June 8, 2024
- SPERRY
Table of Contents
SPERRY MC1011 Goburst Wireless Pro Controller Instructions
Product Overview
- Screen capture key
- -volume button
- L function key
- Left joystick L3 key
- Arrow key
- TURBO key
- HOME button
- + volume keys
- R function key
- A,B,X,Y keys
- RGB light control key
- Right joystick R3 key
- TYPE C charging port
- ZR function key
- MR programming key
- indicator light
- Pair key
- ZL function key
- ML programming keys
- Programming switch
Product Features
- Support switch/switch lite/PC/10S/Android multi-platform operation;
- One key to wake up the host and quickly connect back;
- Built-in six-axis gyroscope, rich in direction, jumping, gun pressing and other somatosensory gameplay;
- Built-in asymmetric motor vibration, three gears adjustable;
- Support manual burst and automatic burst, the burst speed can be adjusted in three gears;
- Support macro programming back key;
- Eight-color LED breathing light design, multi-mode lighting presentation;
- Support APP air upgrade, APP preset management and visual programming.
Operation guide
Mode and connection instructions
Switch/Switch Lite/Switch Oled host connection: Long press the pairing key for
3-5 seconds, the LED channel light of the handle flashes will quickly enter
the Bluetooth search mode, and the corresponding channel light is always on
after the connection is successful.
Note: After the controller enters the sync mode, it will automatically
sleep if it is not successfully synced within 2.5 minutes.
-
Enter the controller setting page according to the following orders.
-
Enter the page to switch the controller mode.
-
Open the controller according to instructionsof (initial use) and enter the connection state. It will be normally operated after successful connection.
Android handle connection: long press HOME+X for 3-5 seconds, the LED1 channel light flashes quickly, enter the Bluetooth search mode, and the LED1 is always on after the connection is successful. Apple IOS 13 and above mode connection: long press HOME+A for 3-5 seconds, LED2+LED3 channel light flashes quickly, enter the Bluetooth search mode, after the connection is successful, LED2+LED3 is always on, supporting MFI game use.
Reconnect and wake up
Reconnection: In the sleep state of the handle, short press HOME,
(A.B.X.Y.+.- .0. / 1 R-/-)) any button LED1-LED4 will flash and automatically
return to the host.
Wake up: The host is in hibernation state, short press the handle HOME
button LED1 -LED4 to flash, you can wake up the host, and the handle is
automatically connected to the host.
Sleep and disconnect
The host screen is turned off, and the handle automatically sleeps. If no
button is pressed within 5 minutes, it will automatically sleep (including the
sensor does not move).
In the wireless connection state, press the HOME button for 5 seconds to
disconnect from the host.
Charging indication
When the handle is turned off, LED1 -LED4 will flash slowly when charging, and the LED will be off when fully charged; When charging in the connected state, the current channel indicator flashes (slowly flashing), and the current indicator is always on when fully charged; When pairing, reconnecting to charging or low power, the pairing, reconnecting LED indication takes priority.
Low voltage alarm
When the battery voltage is lower than 3.55V±0.1 V, the current channel light flashes quickly to indicate that the voltage is low; When the battery voltage is lower than 3.45V±0.1 V, it will automatically sleep; Low voltage alarm: the current on indicator flashes (fast flashing)
Turbo function
A.Manual burst setting: (for the first time) press one or more action
keys (A/B/X/Y/L/ZL/R/ZR), and then press the TURBO button to enable the manual
burst function;
B. Automatic burst setting: (for the second time) press the action key
that has turned on the manual burst function again, and press the TURBO button
again to turn on the automatic burst function;
C. Clear burst settings: (for the third time) press the action key that
has turned on the automatic burst function again, and press the TURBO button
again to clear the burst function;
Clear all bursts: first press and hold the TURBO button for more than 3
seconds and then press the “-” button to clear the TURBO function of all
buttons. TURBO speed adjustment: the T key and the cross key up (UP) are to
increase the speed; the T key and the cross key down (DOWN) are to slow down
the speed; the speed is divided into 8HZ, 12HZ, 15HZ; the default is 1 2HZ.
Wired connection
PC host connection Please use a USB data cable to connect to the handle,
and then plug it into the computer to connect, and the handle LED3 channel is
always on. (Note: The handle defaults to X-INPUT mode on the PC side)
Switch/Switch Lite/Switch Oled host connection: Please use a USB data cable
to connect the handle and the Switch/Switch Lite host, the corresponding LED
light on the handle is always on after connection.
RGB colorful lights
- Click the RGB light button to turn on the RGB light, the default is blue light, press once to change the color (blue, red, green, yellow, cyan, orange, purple, pink);
- Double—click the RGB light button to turn on the monochrome breathing mode, press once to change the color (blue, red, green, yellow, cyan, orange, purple, pink);
- Double—click the RGB light button again, the RGB light will turn on the breathing mode
- Double—click the RGB light button again to turn off the RGB light;
Adjustment of motor vibration speed (only available for SWITCH)
In the connected state, press and hold the four keys L, R, LZ, RZ at the same time to adjust the motor strength (the handle will vibrate once when you adjust it once); the motor vibration is divided into three levels: strong, medium and weak, and the default is Medium, then strong, weak in this way.
M key function programming
M key=MR.ML; programmable keys ↑ /↓ /←/→/ A/B/X/Y/L/R/ZL/ZR/L3/R3;
Programming mode:
- Default MR mapping RZ, ML mapping LZ;
- Setting method: press and hold the M key, then press the programming switch, the indicator light flashes and then release it to enter programming, and then arbitrarily press one or several keys you want to set ( / I P-/-)/ A/B/X/Y/L/R/ZL/ZR/L3/R3), and then press the M key to save the setting. For example: press and hold the MR key, then press the programming switch key to enter the programming setting (the indicator light is flashing), then press the A key, and then press the MR key to save the setting. At this time, the MR key corresponds to the A key function.
- Press and hold the MR key, the ML key, and the programming key at the same time, and the three keys flash once for 3 seconds to clear the programming.
Note: When entering programming, if you do not press the key that can be programmed, the originally set function will be cleared.
Handle hardware reset
When the handle is abnormal, press and hold the HOME button for more than 10
seconds to reset the handle hardware.
Handle upgrade (used when the handle is abnormal or when the software is updated)
-
Software upgrade
-
Double-click the upgrade software to open the interface.
-
When the handle is turned off, press and hold the left joystick (L3), and connect the handle to the computer through the USB to TYPE-C interface cable.
-
After the connection is successful, release the left joystick (L3) and lay the handle flat. At this time, the button “Update Firmware” in the update software window changes from gray to operable.
Click “Update Firmware” on the upgrade interface, the handle will be automatically upgraded. After the upgrade is completed, the handle LED1 and LED4 will flash, and the upgrade is successful. -
The way to upgrade APP
-
Support KeyLinker APP for air upgrade (APP can be downloaded through the official website or QR code)
-
APP can modify buttons, adjust joystick sensitivity, Turbo speed adjustment, motor vibration adjustment, macro programming, etc.
-
This QR code is available for both general Android and IOS systems.
Keylinker APP
You can search for “KeyLinker” on AppStore, Google play, 360 App Store, Dandelion, Xiaomi App Store, Huawei App Store, OPPO App Store, Tencent App Store and other platforms to download, or scan the above QR code to download.
Product pIrameters
- Working voltage: DC 3.7V
- Working current: 25mA-1 50mA
- Sleep current: 27uA
- Built-in lithium battery: 850mAh
- Input charging voltage: 5V
- Charging current: -350mA
- Bluetooth version: 2.1 +EDR
- Transmission distance: 10M
Port TYPE C interface Battery life about 1 OH
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modi cations to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.