denver LED2472 23.6 Inch HD READY LED TV User Guide
- June 3, 2024
- Denver
Table of Contents
denver LED2472 23.6 Inch HD READY LED TV User Guide
Safety Information
- IMPORTANT SAFETY INSTRUCTIONS – READ CAREFULLY BEFORE USE. Take note of the following safety information which appears on the back of the TV. CAUTION TO PREVENT ELECTRICAL SHOCK. DO NOT REMOVE ANY COVER SCREWS, NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that there are important operating maintenance instructions in the literature accompanying this unit
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit
Keep these instructions
- Do not use this TV near water.
- Clean only with a slightly damp cloth.
- Do not block any ventilation openings.
- Install in accordance with the supplied Quick Start Guide and this User Guide.
- Protect the power chord from being walked on or pinched, particularly at plugs, and the point where it exits from the TV.
- Do not allow the power chord to overhang the edge of a table.
- Unplug this TV during lightening storms or when unused for long periods of time
WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT AEXPOSE THIS TV TO RAIN OR MOISTURE, THE TV MUST NOT BE EXPOSED TO DRIPPING AND SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS SHOULD BE PLACED ON THE TV.
NOTE: No naked flames such as candles should be placed on the TV.
Smell/odor from TV
New televisions may produce an unusual smell or odor when first turned on. Due
to the manufacturing process of components. televisions and other electronic
products can have parts that may produce a smell after the product is first
turned on and warms up. The smell will usually dissipate within a few days of
use and does not return. This is normal and occurs with many electronic
products. Please ensure there Is sufficient ventilation around the TV and in
the room and the odor will dissipate.
Safety information
Please read the safety instructions carefully before using the product for the
first time and keep the instructions for future reference.
- This product is not a toy. Keep it out of reach of children.
- Never use old and new batteries or different types of batteries together in remote control. Remove the batteries when you are not using the system for a longer period of time. Check the polarity (+1-) of the batteries when inserting them in the product. Wrong positioning can cause an explosion. Batteries are not included.
- Keep product and batteries out of the reach of children and pets to avoid chewing and swallowing.
- Product operating and storage temperature is from 0 degree Celsius to 40 degree Celsius. Under and over this temperature might affect the function.
- Never open the product: the device may contain parts with deadly voltage. To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
- Please notice that the standby button on the remote control only put the unit in standby.
- Do not expose to heat, water, moisture, direct sunlight!
- Please protect your ears against loud volume. Loud volume can damage your ears and risk in hearing loss.
- The direct plug-in power cable is used as disconnect device, the disconnect device shall remain readily operable. So, make sure there is space around the power outlet for easy access.
FRONT VIEW
The functions of the TV buttons are described below.
INPUT/SOURCE: Press to select the source.
MENU: Press to display the OSD menu, Press again to exit the menu.
CH+/CH-: Press to scan through channels. They are also can be used to move
down/up in the OSD menu screen.
VOL+NOL-: Press to adjust the volume. They are also can be used to move
lefUright in the OSD menu screen. VOL+ button can be used to skip forward to
next menu.
POWER/STANDBY: Turn on/off the TV set.
CONNECTIONS
Coax: Digital output to AV receiver.
AV IN: Connect the external audio and video device terminal to the video
/ audio input port of the TV.
PC AUDIO Connect it to the audio output terminal of PC.
VGA: For PC display.Connect it to the D-Sub 15 pins analog output
connector of the PC.
HDMI: Connect DVD/Blu-ray player or other equipment.
TV1(S2): Connect a Satellite signal.
TV2(T2/C): To connect to the aerial socket on the wall with the RF
coaxial cable.
USB: Connect to USB device for multimedia . Common Interface: CI slot.
: Connect it to your headphone or other audio equipment.
Installation of TV channels
This TV comes with triple tuner.
For digital terrestrial TV: (DVB-T2 – H.265 HEVC)
For digital cable TV: ( DVB-C)
For digital satellite TV: (DVB-S2)
it has an analogue tuner aswell.
When you start the TV for the first time, you will enter a first time
installation mode, Here you shall choose language& what country you are in.
You do this by pushing the arrow left/right keys.
When you are finished making these settings, push OK button to get to autotuning menu.
Choose Tune type. (either DTV, ATV (analogue, or both)
Then choose digital type: DVB-T for terrestrial (if you have own antenna on
the roof), DVB-C if you have digital cable 1V (please notice, you need to know
the DVB-C info from your cable provider) or DVB-S if you have a satellite
dish.
If using DVB-T, you can just make an autoscan, and it will scan in all
available channel.
If using DVEI-C, you can use either full scan or Network scan (some
countries demand this). And insert Network ID, Frequency, Symbol rate and LCN
on/off. If using DUB-S, you have to know what satellite your dish are
pointing towards, and choose this in the setup menu.
Example:
Please notice. The TV has a common interface+ input. This allows you to insert
CA module + smartcard from your TV/cable provider to watch pay per view
channels and selectable channels outside of your package. Pay attention on the
description shown on the back of the TV on how to insert CA module. You can
download full manual on our website: Denver .eu – enter search field and write
your TV model number there.
1. The parts needed for insulting th• mad atuoolaal
2. How to Install the Stand?
MiCe the IV taco down on a sort and flat sutlaco (blanket, foam, cloth,
etc) to prevent any damage to rho TV PIA the Stand laths no* el tha IV tai as
Shiyan Mow.
BOTTOM VIEW
Attach the stand will the SUDSlad &CRAY.
3. Warnings.
a. It can not be WOO to the front or back as shown below Doing so may damage
too stand,
b. It can not be titled to the left or right as shown :Mow Doing so may damage
too stand.
Electric and electronic equipment and included batteries contains materials. components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) Is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the approriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.
All cites have established collection points. where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city. Please enter: penver.pv and then click the search ICON on topline of website. Write modelnumber.LED-2472 Now enter product page. and red directive is found under downloads/other downloads. Operating Frequency Range: 43.5MHz – 858MHz Max Output Power: 40W
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>