denver LED2472 HD LED TV User Guide
- June 3, 2024
- Denver
Table of Contents
denver LED2472 HD LED TV
Safety Information
IMPORTANT SAFETY INSTRUCTIONS – READ CAREFULLY BEFORE USE. Take note of the following safety information which appears on the back of the TV.
- CAUTION TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE ANY COVER SCREWS, NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
- This symbol indicates that there are important operating maintenance instructions in the literature accompanying this unit.
- This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
Keep these instructions
- Do not use this TV near water.
- Clean only with a slightly damp cloth.
- Do not block any ventilation openings.
- Install in accordance with the supplied Quick Start Guide and this User Guide.
- Protect the power chord from being walked on or pinched, particularly at plugs, and the point where it exits from the TV.
- Do not allow the power chord to overhang the edge of a table.
- Unplug this TV during lightening storms or when unused for long periods of time.
WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT A EXPOSE
THIS TV TO RAIN OR MOISTURE. THE TV MUST NOT BE EXPOSED TO DRIPPING AND
SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS SHOULD BE PLACED ON THE TV.
NOTE: No naked flames such as candles should be placed on the TV.
Smell/odor from TV
New televisions may produce an unusual smell or odor when first turned on.
Due to the manufacturing process of components, televisions and other
electronic products can have parts that may produce a smell after the product
is first turned on and warms up. The smell will usually dissipate within a few
days of use and does not return.
This is normal and occurs with many electronic products. Please ensure there
is sufficient ventilation around the TV and in the room and the odor will
dissipate.
Please read the safety instructions carefully before using the product for the
first time and keep the instructions for future reference.
- This product is not a toy. Keep it out of reach of children.
- Never use old and new batteries or different types of batteries together in remote control. Remove the batteries when you are not using the system for a longer period of time. Check the polarity(+/-) of the batteries when inserting them in the product. Wrong positioning can cause an explosion. Batteries are not included.
- Keep product and batteries out of the reach of children and pets to avoid chewing and swallowing.
- Product operating and storage temperature is from O degree Celsius to 40 degree Celsius. Under and over this temperature might affect the function.
- Never open the product: the device may contain parts with deadly voltage. To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
- Please notice that the standby button on the remote control only put the unit in standby.
- Do not expose to heat, water, moisture, direct sunlight!
- Please protect your ears against loud volume. Loud volume can damage your ears and risk in hearing loss.
- The direct plug-in power cable is used as disconnect device, the disconnect device shall remain readily operable. So, make sure there is space around the power outlet for easy access.
Front View
Connections
Installation of TV channels
- This TV comes with triple tuner.
- For digital terrestrial TV: (DVB-T2- H.265 HEVC) For digital cable TV: (DVB-C)
- For digital satellite TV: (DVB-52)
- + it has an analogue tuner aswell.
- When you start the TV for the first time, you will enter a first time installation mode, Here you shall choose language& what country you are in. You do this by pushing the arrow left/right keys.
- When you are finished making these settings, push OK button to get to autorunning menu.
- Choose Tune type. (either DTV, ATV (analogue, or both)
- Then choose digital type: DVB-T for terrestrial (if you have own antenna on the roof), DVB-C if you have digital cable TV (please notice, you need to know the DVB-C info from your cable provider) or DVB-5 if you have a satellite dish.
- If using DVB-T, you can just make an autos can, and it will scan in all available channel.
- If using DVB-C, you can use either full scan or Network scan (some countries demand this). And insert Network ID, Frequency, Symbol rate and LCN on/off.
- If using DVB-S, you have to know what satellite your dish are pointing towards, and choose this in the setup menu.
Example Please notice. The TV has a common interface+ input. This allows you to insert CA module+ smartcard from your TV/cable provider to watch pay per view channels and selectable channels outside of your package. Pay attention on the description shown on the back of the TV on how to insert CA module. You can download full manual on our website: Denver.eu – enter search field and write your TV model number there.
Fixing the Stand
-
The parts needed for installing the sta (supplied)
-
How to install the Stand?
Place the TV face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV.
Put the stand to the neck of the TV set.
Attach the stand with the supplied screws.
-
Warning :
- It can not be tilted to the front or back as shown below. Doing so may damage the stand
- It can not be tilted to the left or right as shown below. Doing so may damage the stand
Electric and electronic equipment and included batteries contains materials,
components and substances that can be hazardous to your health and the
environment, if the waste material (discarded electric and electronic
equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed out
trash can symbol, seen below. This symbol signifies that electric and
electronic equipment and batteries should not be disposed of with other
household waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the
appropriate and designated facility. In this manner you make sure that the
batteries are recycled in accordance with legislature and will not harm the
environment.
All cities have established collection points, where electric and electronic
equipment and batteries can either be submitted free of charge at recycling
stations and other collection sites, or be collected from the households.
Additional information is available at the technical department of your city.
Please enter: Denver.eu and then click the search ICON on
topline of website. Write modelnumber:LED-2472
Now enter product page, and red directive is found under downloads/other
downloads. Operating Frequency Range: 43.5MHz – 858MHz
Max Output Power: 40W
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>