Pxierra Ai TVD6003H Floor Stand Suit Baby Monitor User Guide

Pxierra Ai TVD6003H Floor Stand Suit Baby Monitor

Status & Reference

• Initial Boot Successfully
• Silent Working/No Power/Net Con#g
• Good Connection And Working
• Night Light Controlled By APP
• The Device Is Faulty

Safety

Pxierra Ai Baby Monitor was created to help parents track factors that a#ect their baby’s safe sleep and general review. This product cannot replace adult supervision. Ensure your child’s health by checking on them regularly. It is not designed to cure, treat, or prevent any disease or health condition, including, but not limited to, Sudden Infant Death Syndrome (SIDS). No baby monitor can ever replace you as a caregiver or substitute for asking your doctor for medical advice.

WARNING
STRANGULATION HAZARD — Children have STRANGLED in cords.
NEVER attempt to use a cord without the protective covering. Check protective covering before each use to ensure that the cord is not exposed to your child. Immediately discontinue use if the protective covering is damaged or broken. This device is designed for indoor use only. This device is intended to be used behind a standard crib and against the wall only. Use only the AC power supply included with your Pxierra Ai baby monitor. Adult assembly is required. Keep small pa!s away from children when assembling. This product cannot replace adult supervision. Ensure your child’s health by checking on them regularly. This product is not a toy. Could you not allow children to play with it? Keep the device and power cord out of the reach of children a minimum of 3 ft (1m) away from the children;

Notice

• This device is designed for indoor use only.
• Install in accordance with building and installation codes and standards where your baby lives;
• This product is designed to be mounted behind a standard crib and against the wall only. Do not use it otherwhere;
• This device is designed for newborns and childhood before 14 years old only;
• Use only the AC power adapter and DC cord included in the packing box;
• Keep the device and DC cord out of the reach of children and pets a minimum of 3 ft (1m) away from the children;
• Use only in temperatures between –40°F and 113°F. Do not block air low to the device;
• Never use the device near water, including near bathtubs, sinks, and” machine tubes, wet basements, etc.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other devices that produce heat;
• Please ensure that the device can be completely stationary and not shaken during working, and avoid touching or wind blowing which may a#ect the stable state of the device during working;
• Only use attachments and accessories speci$ed by the manufacturer and not cover it with anything.
• Unplug this device when unused for long periods of time;
• Do not push any objects into the openings of the device unless consistent with the authorized operation of the device. Doing so can cause a $re or an electrical shock by sho%ing out interior components;
• NEVER attempt to use cord without the protective covering. Do not install the equipment in a way that stretches or squeezes the DC cord;
• Do not disassemble the device or attempt to se&ice it, it may expose you to dangerous high voltage or other risks. Opening a sealed component or product will void warranty.

Advises

• Use a firm sleep surface.
• Do not put anything (pillows, blankets, stu#ed toys, or crib bumpers) anywhere baby’s sleep area.
• Babies should not sleep in an adult bed, on a couch, or on a chair alone, with you or anyone else.
• Babies should not sleep in swings, car seats, or carriers.
• Have your baby share your room, not your bed.
• Do not let your baby overheat during sleep.
• Do not use devices and products (wedges, positioners) that claim to reduce the risk of SIDS/SUID.
• There is no evidence to recommend swaddling as a strategy to reduce the risk of SIDS.
• Do not use home hea$ or breathing monitors to reduce the risk of SIDS.
• Do not smoke or let others smoke around your baby.
  Source from SAFE SLEEP VIRGINIA， https://www.vdh.virginia.gov/safe-sleep/

#SafeSleepSnap
For More Information about Safe Sleep for Your Baby: Reduce the Risk of Sudden Infant Death Syndrome (SIDS) and Other Sleep-Related Causes of Infant Death, check out: https://safetosleep.nichd.nih.gov/resources/caregivers
For More Information about how to build a safe sleep environment, check out: https://safetosleep.nichd.nih.gov/modules/custom/sts_interactive_room/html/index.html or Scan the QR code to obtain the content of the URL:

In the box

What Prepare by Yourself

Not be used with Rocking Crib. This is a necessary condition for safe sleep monitoring properly.
The 32GB microSDHC card can roll store for about 7 days of video playback, and the maximum capacity is 128GB, which is for about 28 days of video playback. Use a microSDHC card that meets UHS-I or higher to ensure compatibility.

• 0-8 months：80cm(32in) monitor to crib sheet over 1-year-old: 140cm(55in) monitor to crib sheet
• Follow Safe Sleep®`s recommended way of wearing Baby Onesies to sleep, for safe sleep and more effective monitoring.
• No #ickering lights； Stable ambient light, so that babies have comfo$ sleep and monitor work properly
• Do not put anything (pillows, blankets, stuffed toys, or crib bumpers) anywhere baby’s sleep area.

Let`s Get Started

Search and download the Android App or iOS App VitaRadar for the Pxierra Ai baby monitor.

Download the Vitaradar app and set up your account. Follow the in-app instructions to set up your Pxierra Ai Baby Monitor. You can choose to follow the assembly instructions in-app or in this booklet.

Need Help

Video Guidance www.pxierra.com
Sent Message @pxierra / @pxierrababymonitor
Sent Email support@pxierra.com Share your product sto” with us and your friends and family:
Earn rewards for each successful referral
Share a baby story and win a special gift

Installation Options

Position the crib against the preferred wall at least 5 inches (12.7cm) distance in the nurse!. In order to obtain the best viewing angle and comfortable use experience, please mount up the Pxierra Ai Baby Monitor in the middle position behind the Crib, or determine the speci#c installation position of the device through the APP live preview.
Notice: The power socket should be placed within 2m from the crib.

Assemble stand, bottom to top. Follow the steps ：

Screw three FLOOR STAND LEGs and ELBOW CONNECT together. Then thread the TYPE-C end of the USB cable up through the hole in the center of the Elbow bottom.

Push together the MOUNT to the BASE TUBE and second EXTENSION TUBE and RETRACTABLE TUBE. Then screw RETRACTABLE TUBE and ELBOW CONNECT together.

Push the USB cord through the rest of the EXTENSION TUBE in sequence, and mount them together by screwing the EXTENSION TUBE. Choose between three EXTENSION TUBEs or two EXTENSION TUBEs as instructed.

First, insert the USB-C plug reseted in the MOUNT into the USB-C socket inside the MONITOR neck, and then insert the MONITOR and CORD back to the opening of the MOUNT together until the locking device of the MOUNT gives rebound feedback to complete the installation of the MONITOR.

The MONITOR installed on the MOUNT can be manually rotated 170 degrees from front to back and 170 degrees from left to right to position its orientation. The appropriate Angle needs to be adjusted according to the live stream screen in the VitaRadar APP. Please refer to the application introduction of the APP for speci#c methods.

Rotate AXIS HALO to reveal the position of the TF card slot, remove the TF card slot cover, insert side B vertically upward into the TF card slot until the TF card is locked, and then restore the TF card slot cover to its original position.Do not power o” the device when operating the TF card.

Insert the POWER ADAPTER into the power socket, and then insert the USB-A plug into the USB-A socket of the POWER ADAPTER to power on and activate the entire device.

During the installation of the EXTENSION TUBE, CRIB EDGE GRIP is fitted into the EXTRA TUBE, or HOOK&LOOP is used to bind crib edge to the assembled FLOOR STAND, so as to prevent the FLOOR STAND from falling down.

Limited Warranty & Compliance

The full information on Pxierra’s Limited Warranty visit: Pxierra.com/legal/warranty Pxierra, Inc. | Pxierra Ai baby monitor | Model No: TVD6003H This device complies with pa! 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful inteference, and
2. this device must accept any inteference received, including inteference that may cause undesired operation.

Any Changes or modi#cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to pa! 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inteference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inteference to radio communications. However, there is no guarantee that inteference will not occur in a particular installation. If this equipment does cause harmful inteference to radio or television reception, which can be determined by turning the equipment o$ and on, the user is encouraged to t% to correct the inteference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION
Any changes or modi#cations not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
RF EXPOSURE WARNING:
This equipment complies with FCC radiation exposure limits set foth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.
POWER ADAPTER WARNING
The adapter shall be installed near the equipment and shall be easily accessible.

RF POWER SPECIFICATIONS

POWER SUPPLY INFORMATION

References

• PXIERRA PERCEP AI – Pxierra
• Safe to Sleep Interactive Room
• Caregivers & Families | Safe to Sleep®
• Safe Sleep Virginia - Safe Sleep

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>