SVEN GC-W500 Gaming Racing Wheel User Manual

SVEN GC-W700 Game Racing Wheel

Congratulations on the purchase of Sven game racing wheel!

COPYRIGHT
© SVEN PTE. LTD. Version 1.0 (15.09.2021).
This Manual and information contained in it are copyrighted. All rights reserved.

TRADEMARKS
All trademarks are the property of their legal holders.

NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The information in this Manual is given on «as is» terms. The author and the publisher do not bear any liability to a person or an organization for loss or damage which has arisen from the information contained in this Manual.

BUYER RECOMMENDATIONS

• Unpack the device carefully. Make sure there are no accessories left in the box. Check up the  device for damage; if the product was damaged during transportation, address the firm which carried out the delivery; if the product functions incorrectly, address the dealer at once.
• Check up the package contents and availability of the warranty card. Make sure the warranty card has a shop stamp, a legible signature or the seller’s stamp and purchase date, and the goods number corresponds to that in the warranty card. Remember: in case of warranty card loss or discrepancy of numbers you forfeit the right for warranty repairs.
• Before installing and using the speaker system, read this Manual carefully and keep it for future reference.
• Shipping and transportation equipment is permitted only in the original container.
• Does not require special conditions for realization.
• Dispose of in accordance with regulations for the disposal of household and computer equipment.
• The date of manufacture of the product is indicated on the box.

DESCRIPTION

GC-W700 Game Racing Wheel is specially designed for PC. Ergonomic design with rubber coating and built-in vibration feedback mechanism ensures realistic driving in an autosimulator. Effect of vibration feedback imparts a feeling of speed and uneven road surface, vibration at swerves, collisions and crashes in games. Panel with brake and acceleration pedals makes it possible to gain speed or brake in a flash. Rubber suction caps and/or fixation stand provide secure fixation of GC-W700 to the table ensuring steadiness during games.

SAFETY PRECAUTIONS

• Do not disassemble or repair the device on your own. Maintenance and repairs should be carried out by qualified staff of the service centre only.
• Protect the device from direct impact of high humidity, dust, strong magnetic fields, vibrations, high temperatures, toxic liquids and gases.
• Instructions for device maintenance: for cleaning the case of the device please use clean soft cloth. Do not use such solvents as gasoline or spirit for cleaning, since these solvents can damage the surface of the device.
• Do not drop the device not to have it damaged.

PACKAGE CONTENTS

• Game Racing Wheel — 1 pc
• Pedal unit — 1 pc
• Fixation stand — 1 pc
• Software CD disk —1 pc
• Operation manual — 1 pc
• Warranty card — 1 pc

SPECIAL FEATURES

• D-INPUT and X-INPUT modes
• Three-level sensitivity adjustment
• Ergonomic design of game racing wheel
• Wheel diameter – 10” (254 mm)
• Steering angle – 180 degrees
•  Supports: Windows XP/Vista/7/8/10
• USB Interface
• Built-in Vibration feedback for more realistic effect
• Two axes, D-Pad, Tiptronic lever for changing gears, 12 additional keys
• Rubber coating of the wheel for comfortable driving
• Rubber suction caps and fixation stand for secure fixation on the table
• Digital and Analog Modes available
• Foot pedal unit included

SYSTEM REQUIREMENTS

• USB port available
• Operational System Windows XP/Vista/7/8/10

CONSTRUCTION

1. Racing wheel
2. Buttons 5 – 8
3. Rubber inserts
4. D-Pad
5. Programming indicator
6. Paddle shifters
7. Button 9
8. Buttons 1 – 4
9. ON/OFF MODE indication
10. Button10
11. MODE button
12. Suction cups
13. Foot pedal port
14. USB cable
15. Brake pedal (Y-)
16. Acceleration pedal (Y+)

TABLE OF FUNCTION KEYS

| PC(D-INPUT)

Analog mode

| PC(D-INPUT)

Digital mode

| PC(X-INPUT)
---|---|---|---
Digital

buttons

| 3| 3| A
2| 2| Y
4| 4| B
1| 1| X
6| 6| RB
5| 5| LB
8| 8| RT
7| 7| LT
D-PAD| UP| | UP
DOWN| | DOWN
LEFT| | LEFT
RIGHT| | RIGHT
Function buttons| 10| 10| START
9| 9| BACK
Direction buttons| LX| /| LX
Left petal| Y-| Y-| LT
Right petal| Y+| Y+| RT
Brake pedal| Y-| Y-| LT
Gas pedal| Y+| Y+| RT
Mode selection| MODE| MODE| X-Guide

 CONNECTION AND INSTALLATION

• Install the device on even surface (for example, on a table) on its 5 suction If necessary fasten it with the fixation stand (Fig. 2).
• Connect the pedal unit to the device (Fig. 3) using the cable built into the unit to the connector, and then connect the device itself with a USB cable to a free USB port on the
• Insert the driver CD into your PC’s drive and run «setup.exe» to install the drivers on your If your PC does not have a CD drive, download the https://www .sven.fi steering wheel software GC-W400 in the support section.

USING GAME RACING WHEEL WITH A PERSONAL COMPUTER

• Install LS-USBMX1/2/3 Steering Wheel W/ Vibration.exe. driver. Double-click on the file, then follow the instructions of the

D-INPUT MODE

By default, the steering wheel automatically turns on the D-Input mode, analog mode – the red indicator is constantly on. A short press on the MODE button switches the steering wheel to digital mode – the LED indicator goes out. To test the rudder, enter the test interface, if necessary, perform a key and axle test.

• In «control panel» menu, then click on «devices and printers», icon, in the window that opens, select

«LS-USBMX 1/2/3 Steering Wheel W/Vibration», shortcut, right-click on «Game controllers settings» (Fig. 5).

• Click on «Properties» button on the PC display

«Properties: LS-USBMX 1/2/3 Steering Wheel W/ Vibration» window will appear (see Fig. 6). Here you can check the operation of the axes and keys, check and adjust the vibration feedback «Vibration Test» (see Fig. 7). ****

X-INPUT MODE

Connect the steering wheel to your PC. D-input mode is enabled by default. Press and hold the MODE button for 3 seconds – the steering wheel will switch to X-input mode. During mode switching, the red LED will blink three times.

• Go to «control panel» menu, then click on «devices and printers» icon, in the window that opens, select

«LS-USBMX 1/2/3 Steering Wheel W/Vibration», shortcut, right-click on «Game controllers settings» (see Fig. 8).

• Press «Properties» button in the window that opens (see 9) you can check the operation of the axes and keys. The «Parameters» tab allows you to calibrate the steering wheel. ****

REMAPPING BUTTON

Source keys: 1,2,3,4,5,6,7,8

• Reassignable Keys: left petal (Y-), right petal (Y +), brake pedal (Y-), gas pedal (Y +).
• Hold the 9 + 10 key at the same time for 3 seconds, the green LED indicator will flash
• Press the reassignable key (for which you want to change the value), the green LED will flash
• Press the programming key, the green LED will turn off, programming is

Setting the default key value

• Hold 9 + 10 keys at the same time for 3 seconds, the green LED indicator will flash
• Press the reassignable key (right / left paddle, brake or accelerator pedal), the green LED will flash slowly.
• Press the reassignable key again, the green LED will turn

Reset all buttons to their default values

• Hold 9 + 10 keys at the same time for 3 seconds, the green LED indicator will flash
• Hold the 10 key for 4 seconds, the green LED is

off and all programmed key functions are cleared

The reassigned buttons retain their properties until the steering wheel is disconnected from the PC. When you reconnect the steering wheel, the button values are set to default.

SENSITIVITY ADJUSTMENT

Adjustment allows you to set three levels of steering wheel sensitivity:

• Press 9 + 10 key at the same time for 3 seconds, the green LED indicator will flash
• Press UP( ) n the D-pud, the LED turns off, the sensitivity is set to
• Press DOWN ( ) button to set the low sensitivity, the LED turns off – the low sensitivity is
• Press left or right on the D-pad, to set the average sensitivity, the LED will turn off, and the average sensitivity is set.

The steering sensitivity setting retains its properties until the steering wheel is disconnected from the PC. When you reconnect the rudder, the sensitivity value is set to default.

TROUBLESHOOTING

is properly connected to the USB port of the PC. Connect device to a different USB port.

• Do not use USB hubs and extension cords, connect the steering wheel directly to the USB port of your PC.

• The manipulator may be in conflict with other peripheral

devices.

• Restart your PC.

Vibration feedback does not work during the game.| • Go to the game settings, turn on the mode of operation of the steering wheel with vibration feedback.

• Disconnect the pointing device from the PC, restart and

reconnect the pointing device.

During the game, the vibration feedback function is

insufficient.

| • Check vibration feedback in the software settings for the manipulator «Vibration Test». Adjust the force of vibration

If none of the above mentioned solutions removes the problem, please refer to nearest authorized service center for consultation by qualified specialist. Never try to repair the device on your own.

Documents / Resources

| SVEN GC-W500 Gaming Racing Wheel [pdf] User Manual
GC-W500 Gaming Racing Wheel, GC-W500, Gaming Racing Wheel
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>