Ekwb 106834 PCI Bracket Pass Through User Guide
- June 1, 2024
- ekwb
Table of Contents
Ekwb 106834 PCI Bracket Pass Through
Technical Specifications
- Position 1: Single slot bracket (Black)
- Position 2: Pass Through nut (Nickel)
- Position 3: Pass Through screw (Nickel) x 2
- Position 4: Rubber 5.5/8*1 NBR or 7 x 1.5 mm
Installing the EK-Loop PCI Bracket Pass-Through
Step 1
First, remove one (1) GPU expansion slot from the PC Chassis. Save the
removed screw for later steps.
Tools Required
- Phillips Head Screwdriver
- PC Chassis Screw
Step 2
Replace the original GPU Expansion slot with the EK-Loop PCI Bracket Pass-
Through. Secure the bracket with the saved PC Chassis screw.
Note: Rotate the bracket as shown in the picture. The cable management hole, featuring a rubber gasket, prevents friction damage to cables passing through the metal gap on the bracket.
Tools Required:
- EK-Loop PCI Bracket Pass-Through
- PC Chassis Screw
- Phillips Head Screwdriver
Support and Service
If you need assistance or wish to order spare parts or a new mounting
mechanism, please contact: EKWB CustomerSupport
For spare parts orders, refer to the page with Technical Specifications and Main Parts where you can find the EAN number of each part you might need. Include the EAN number with quantity in your request.
FAQ
-
Q: Can I use pure distilled water with this product?
A: No, it is recommended not to use pure distilled water. Using corrosion- inhibiting coolants is always recommended for liquid cooling systems and mandatory for nickel-plated water blocks. -
Q: What coolants does EK recommend for best results?
A: EK recommends the use of EK-CryoFuel coolants for optimal performance.
EK-Loop
PCI Bracket Pass-Through
Please note the installation of the product is intended to be undertaken by an adequately trained and experienced person. You are installing the product at your own risk. If you are not properly trained or experienced or feel unsure about the installation procedure, please refrain from installing the product yourself and contact our tech support for assistance. We disclaim our liability for any damages to the product as well as incidental, consequential, or indirect damages incurred due to improper or inappropriate installation.
- Before you start using this product, please follow these basic guidelines:
- Carefully read the manual before beginning with the installation process.
- The EK Fittings require only a small amount of force to screw them firmly in place since the liquid seal is ensured by the rubber O-ring gaskets.
- Using corrosion-inhibiting coolants is always recommended for liquid cooling systems and mandatory for nickel-plated water blocks!
- Do not use pure distilled water!
- For best results, EK recommends the use of EK-CryoFuel coolants! To reach optimal performance, make sure to bleed the air out of your water block thoroughly!
TECHNICAL SPECIFICATIONS AND MAIN PARTS
Position | EAN | Description | Quantity |
---|---|---|---|
1 | 106837 | Single slot bracket (Bl.) | 1 |
2 | 106834 | Pass Trought nut (Ni) | 2 |
3 | 106832 | Pass Through screw (Ni) | 2 |
4 | 106930 | Rubber 5.5/8*1 NBR | 1 |
5 | 5192 | OR 7 x 1.5 mm | 2 |
INSTALLING THE EK-Loop PCI Bracket Pass-Through
STEP 1
First, remove one (1) GPU expansion slot from the PC Chassis. Save the removed
screw for later steps.
For this step, you will need:
STEP 2
Replace the original GPU Expansion slot with the EK-Loop PCI Bracket Pass-
Through. Secure the bracket with the saved PC Chassis screw.
Make sure to rotate the bracket as shown in the picture. * The cable management hole, featuring a rubber gasket, prevents friction damage to cables passing through the metal gap on the bracket.
For this step, you will need:
SUPPORT AND SERVICE
In case you need assistance or wish to order spare parts or a new mounting
mechanism, please contact: https://www.ekwb.com/customer-support/
For spare parts orders, refer to the page with “TECHNICAL SPECIFICATIONS AND
MAIN PARTS” where you can find the EAN number of each part you might need.
Include the EAN number with quantity in your request.
SOCIAL MEDIA
Documents / Resources
| Ekwb
106834 PCI Bracket Pass
Through
[pdf] User Guide
106834 PCI Bracket Pass Through, 106834, PCI Bracket Pass Through, Bracket
Pass Through, Pass Through, Through
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>