REceiver-PRO Miniature UHF for Professional Racers User Guide

REceiver-PRO Miniature UHF for Professional Racers

Parts

1. Input (Auxiliary Audio Input)
2. Output (Earphone Jack)
3. Scan Function (Not available on REceiver Pro)
4. Keys Lock/Unlock Indicator
5. Power On/Off Button
6. Channel Number Display
7. Frequency Display
8. Volume Level Indicator
9. Channel 2 Preset Button
10. Programming Button
11. Channel 1 Preset Button
12. Preset Channel Receive Indicator
13. Channel Indicator
14. Volume or Channel Up/Down Buttons
15. Battery Level Indicator
16. Receive Frequency Signal Strength Indicator

Avoid Hearing Damage
To prevent possible hearing damage. do not use the Receiver at high volume for a long period of time. Always lower the volume level of the device you connect to the Receiver Audio Input port before connecting.

LIMITED WARRANTY

Please take a few minutes to register your Receiver or Receiver PRO. Completing product registration allows us to verify warranty eligibility. To register your device please visit www.racingelectronics.com/registration.
WARNING
Modification of this device to receive cellular radio telephone service signals is prohibited under FCC rules and Federal Laws.
The complete declaration is available at: www.racingelectronics.com
Connect With Us On Social
Get the latest news about RE products and promotions!
Facebook       :      Racing Electronics
YouTube       : Racing Electronics
Instagram      :      @reradioz
Twitter           :      @reradioz

OPERATION MODES

Channel 1 or 2 Preset Listening

• Press 1 or 2 to hold on the preset 1 or 2 channel. The selected Channel will be the Priority channel if Scan function is activated.
• Long press 1 and 2 to activate scan function. “SC” will flash on display and channel numbers 1 and 2 will alternate.

Keys Lock/Unlock

• Press 3 times on the power On/Off button to lock or unlock the device keys.
• A key symbol will appear on display and the buttons will be disabled.

PROGRAMMING STEPS

Main Screen

1. Channel Programming
   Long Press On The “Prog” Button, The Following Screen Should Appear.

2. Navigate Through the Channels
   With the Channel “CH” number Highlighted, (as indicated above) Use The Volume UP Down Buttons To Select The Desired Radio Frequency (RF) Channel. Once That Is Completed Press The Prog Button Once To Bring You To The Next Programming Step

3. Sub Channel Programming

   • Navigate Through The Sub Channel Programming Once Highlighted, Use The Volume Up Down Buttons Once Again To Select Your Sub Channel Type. Choose From The Following 4 Choices:

   • CSQ – Carrier Squelch (No PL or DPL Required)

   • PL – Analog Sub Tone

   • DPLN – Normal Digital Sub Code

   • DPLI – Inverted Digital Sub Code

   • Navigate Through The Sub Channel Programming
     Once You Have Selected Your Sub Channel Coding Type, Quick Press The Prog Button Once Advancing To Select The Proper Value Of The Sub Channel.

   • Navigate Through The Sub Channel Programming
     Once Value Is Highlighted, Use The Volume Up Down Buttons Again To Select The Desired Sub Channel Tone Or Code.
     Once The Proper Tone Or Code Is Selected, Quick Press The Prog Button Once To Program The Selections And Return To The Main Screen

References

• Racing Electronics
• Product Registration – Racing Electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>