XGIMI Horizon, Horizon Pro 4K LED Projector User Guide
- June 3, 2024
- XGIMI
Table of Contents
Horizon, Horizon Pro 4K LED Projector
User Guide
Please read the Product Instructions carefully before using the product.
Thank you for purchasing and using the products of Chengdu XGIMI Technology
Co., Ltd. (hereinafter referred to as “XGIMI Technology” or “XGIMI”). You
should read the Product Instructions carefully before using this product for
both your safety and interests.
XGIMI Technology disclaims all responsibilities for any personal injury,
damage to property, or other loss that may occur as a result of improperor
unsafe use of this product.
About the Product Instructions (hereinafter referred to as the “Instructions”)
The copyright of the Instructions belongs to XGIMI Technology.
Trademarks and names mentioned in the Instructions belong to their respective
right owners.
In case of inconformity between the content of the Instructions and the actual
product, the actual product shall prevail.
Any objections to any content or clause found within the Instructions should
be reported to XGIMI Technology in written form within 7 days after the
purchase; otherwise, it will be assumed that you agree to, understand, and
accept all the content of the Instructions.
Google, Android TV and Chromecast built-in are trademarks of Google LLC.
Google Assistant is not available in certain languages and countries.
Availability of services varies by country and language.
HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc.
For DTS patents, see http://patents.dts.com. Manufactured under license from
DTS Licensing Limited. DTS, DTS-HD, DTS Studio Sound, and the DTS-HD logo are
registered trademarks or trademarks of DTS, Inc. in the United States and
other countries. © 2020 DTS, Inc. ALL RIGHTS RESERVED.
Dolby, Dolby Audio, and the double-D symsbol are trademarks of Dolby
Laboratories.
- Model: XKO3H/XKO3K
- XGIMI Technology reserves the right to interpret and amend the Instructions.
Device on/off
Connect to the power source, and press the” ” button to turn on the device.
When the device is on, press the “ ” button to turn off the device.
Remote control pairing
Place the remote control within 10 cm of the device, press” ” and ” ”
simultaneously until an indicator light begins flashing. This means that the
remote control enters the pairing mode. When a “Ding” is heard, the
connection is successful.
If the pairing fails, it will exit after 30 seconds. Repeat the above steps
after exiting.
Automatic focus adjustment/Remote focus adjustment
When the automatic focus adjustment function is enabled, the frame will be
adjusted automatically when you turn on the device or move it to another
location.
Enable automatic focus by pressing “+” After holding on to the “+” button to
enable manual focus adjustment, you can manually adjust the focus by pressing
the “left/right” button or the “VOL/-” button. After the adjustment, you can
press other buttons to exit.
Automatic keystone correction
When the automatic keystone correction function is enabled, the frame will be adjusted automatically if you move the device to another location.
When the automatic obstacle avoidance function is enabled, the frame will automatically avoid obstacles if there are obstacles in the projection area. When the automatic screen alignment function is enabled, the frame will automatically match the screen if there is a 16:9 or 16:10 screen in the projection area.
Press the “O” button on the remote control to enter the “Keystone Correction” page. Select “Auto Keystone Correction” to enable the automatic keystone correction function. Select “Manual Keystone Correction” to adjust the four points and the size of the frame.
Google Assistant
Talk to Google to control your TV using your voice.
Press the Google Assistant button on your remote to search for movies and
shows, get recommendations to match your mood, get answers, control smart home
devices, and more.
Bluetooth speaker
Use mobile Bluetooth settings to search for “XGIMI HORIZON PRO” or “XGIMI
HORIZON” to pair with the device and play songs.
If you need to turn off the projection frame during music playback, you can
press the “Power” button and select “Display Off”
More settings
At any interface, you can press the” 0″ button on the remote control to
quickly set your device. To configure more settings, go to the “All Settings”
page.
The main settings are described as follows:
Brightness and color
Select a brightness mode, such as standard, bright, eye-protection, and adjust
the brightness level.
If the “Environmental Adaptation” function is enabled, the device can
automatically adjust the brightness based on the ambient brightness.
Image mode
Select different image modes in different scenarios, such as movie, football,
office, and game, to adjust the image parameters of the video or signal
source.
The low-latency option is available in game mode.
Sound effect
Select different sound effects in different scenarios, such as movie, music,
and sport, to enjoy the optimal sound experience.
Focus calibration
If the automatic focus adjustment function is not as good as before after
long-term use, you can tune the automatic focus adjustment function through
“Focus Calibration”.
Note: When calibrating, make sure that the device is in the front
projection state and that it is 1 to 2 meters away from the wall or screen.
Keystone calibration
If you are not satisfied with the effect of the automatic keystone
correction function, you can recalibrate the automatic keystone correction
function through “Keystone Calibration”.
Note: When calibrating, make sure that the device is in the front
projection state and that it is 1 to 2 meters away from the wall or screen.
Gyro calibration
If the automatic keystone correction function is not as good as before
after long-term use, you can recalibrate the gyro through “Gyro Calibration”
to optimize the effect of automatic keystone correction.
Note: Make sure that the device is placed horizontally during
calibration.
Online upgrade
Check the latest version and upgrade the system through “Settings” -> “Device Preferences” -> “About” -> “System Update”
Chromecast Bunt-in
Chromecast built-in
Easily cast your favorite movies, music, and more to your TV with Chromecast
built-in.
Simply tap the Cast button from apps you already know and love to stream
entertainment from your phone, tablet or laptop to the TV. While you’ re
streaming, you can keep using your phone for other things- scroll through
social media, send a text, and even accept calls.
Important Precautions
-
Do not face lens into eyes because the strong projector light may cause injury to the eyes.
-
Do not block the air inlet/outlet of the device in order to avoid damage to internal electronic devices arising from normal heat dissipation failure of the device.
-
Do not wipe the lens directly with cleaning tools including paper and cloth in order to avoid damage to the lens. Please clean up the dust on the lens surface through clean air blowing.
-
Do not wash the device with chemicals, detergents, or any liquid in order to prevent the circuit board from being corroded by rainwater, moisture, and mineral- containing liquids.
-
Keep the device and its components and accessories out of reach of children.
-
Make sure that the device is used in a dry and ventilated environment.
-
Do not store the device in overheated or overcooled places, because extreme temperatures will shorten the life of electronic devices. Place and use the
device in an environment of 0°C-40°C. -
Do not put the device into any heating equipment (such as dryer and microwave oven) for drying.
-
Do not firmly extrude the device or place barriers on it or its back to avoid damage to the device.
-
Do not throw, strike, or sharply vibrate the device to avoid damage to the internal circuit board.
-
Do not try to disassemble and assemble the device yourself. If any issue occurs, please contact the after-sales service of XGIMI.
-
Do not repair any product on your own. If the device or any component cannot work properly, consult the after-sales service of XGIMI in a timely manner or return it to the factory for repair.
FCC warning
The device meets provisions of part 15 of FCC rule. Operation meets the
following 2 conditions: (1) the device will not cause harmful interference,
and (2) the device must accept any interference received, including
interference that may result in accidental operations. User manual or
operating instructions shall remind users that intentional or unintentional
modification and replacement of radiators without explicit approval from the
responsible compliance party may prevent the user from operating the device.
If the manual is provided in a form otherthan paper, such as, provided in
computer disk through the Internet, then the information required in the
section can be included in the manual in the alternative form under the
premise that users can have access to the form information.
Notes: the device has been tested to meet restrictions of part 15 of FCC rule
on B-class digital device. These restrictions are aimed at providing the
effective prevention of harmful interference in a residential installation.
If installation and use are not made according to the instructions, the device
will generate and radiate radio frequency energy, and may cause harmful
interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If the device does
cause harmful interference to radio or television reception (determined by
stopping and starting the device), it is s uggested that users should attempt
to correct the interference by one or more of the following measures:
- Reposition direction of receiving antenna.
- Increase the distance between the device and the receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected..
- Consult distributors or experienced radio/television technicians to seek help
- This device is acting as a slave and operating in the 2.4 GHz (2402-2480 MHz, 2412-2462 MHz) band or 5 GHz (5.180 GHz-5.240 GHz, 5.260 GHz-5.320 GHz, 5.500 GHz-5.700 GHz, 5.745 GHz-5.825 GHz) band.
As with any bright source, do not stare into the direct beam, RG2 IEC 62471-5:2015.
CE Maintenance
-
Use careful with the earphone maybe excessive sound pressure from earphones and headphones can cause hearing loss.
-
The product shall only be connected to a USB interface of version USB2.0.
-
Adapter shall be installed near the equipment and shall be easily accessible.
-
EUT Operating temperature range: 0°C-40°C.
-
Adapter:
The plug considered as disconnect device of adapter
Power supply and ADP (rating):
(1) Input: AC 100-240 V 50/60 Hz 4.0 A
Output: DC 19.0 V 13.16 A
(2) Input: AC 200-240 V 50 Hz 2.0 A
Output: DC 19.0V 11.58 A -
The device complies with RF specifications when the device is used at a distance of 20 cm away from your body.
-
To prevent possible damage to hearing, do not listen at high volume levels for long periods.
Declaration of Conformity
Chengdu XGIMI Technology Co., Ltd. hereby declares that this product is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU.
This product is allowed to be used in some of EU member states. For example,
the device can be used in the following Member States:
Operations in the 5.15-5.25 GHz band are restricted to indoor usage only.
This Frequency applies to the following Member States or the geographical area
within a Member State where restrictions on putting into service or
requirements for authorisation of use exist.
IC Warning
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement
For remote control, this device complies with FCC and IC radiation exposure
limits set forth for an uncontrolled environment.
The transmitter shall not be placed or operated in conjunction with any other
antenna or transmitter.
For the LED projector, the device meets FCC radiation exposure limits
specified f or uncontrolled environments. In the installation and operation of
the device, the distance between radiator and body should be at least 20 cm.
Notes: 5150-5250 MHz frequency range is only for indoor use.
This Frequency applies to the following Member States or the geographical area
within a Member State where restrictions on putting into service or
requirements for authorisation of use exist.
Disposal instructions for used products:
The product is designed and manufactured with high quality materials and
components that are recyclable.
This symbol on the product indicates that it is protected under the Directive
2012/19/EU.
Exessive blue light of rsplay products can cause eye fatigue, insomnia and
other adverse reactions. This product is a low blue TUV Rheinland certified
products, by reducing the blue light component technology, can reduce eye
fatigue and other adverse reactions to some extent.
In order to protect your eyesight, it is still recommended avoiding watching
for a long time. If you feel eye strain, it can be relieved by looking into
the distance or doing eye health exercises.
www.tuv.com
ID 0217008581
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>