XGIMI XK03H Horizon Projector User Guide

XG I `/ I Horizon Pro / Horizon
USER GUIDE

Please read the Product Instructions carefully before using the product
Thank you for purchasing and using the products of Chengdu XGIMI Technology Co., ltd. (hereinafter referred to as “XGIMI Technology’ or “XGIMI”). You should read the Product Instructions carefully before using this product for both your safety and interests.
XGIMI Technology disclaims all responsibilities for any personal injury, damage to property, or other loss that may occur as a result of improper or unsafe use of this product.
About the Product Instructions (hereinafter referred to as the “Instructions”)
The copyright of the Instructions belongs to XGIMI I technology. Trademarks and names mentioned in the Instructions belong to their respective rightful owners. In case of conformity between the content of the Instructions and the actual product, the actual product shall prevail.
Any objections to any content or clause found within the Instructions should be reported to XGIMI Technology in written form within 7 days after the purchase; otherwise, it will be assumed that you agree to, understand and accept all the content of the Instructions.
Google, Android, Android TV, Chromecast, and other related marks and logos are trademarks of Google LLC. Google Assistant on Android IV is not available in Portugal, Russia, China (Taiwan), China (Hong Kong), and China (Macao).
: MI! Egli-Definition Mu It ‘media face, and the IIDMI logo art IadMarks to leg nademar ks..ol I 10/.111 icons.’ ng Administrator, Inc.
; Monts, e.re p://paterils.d.stern. IAgnufarlred owlet license bent D 5 I ceasing D IS-IS ID. D IS Studio Sound. NC logo is reels edited trademarks o’ trademarks of Drs. Inc. in the United States and other RF S: RVE D.
Delby, ‘Jot py hod o, and the double-C) symbol ate liatleraiks of DtAby abra tut es.
Model: XIW:311/XKO3K • MIMI I ethnology reserves the right 😮 interpret and amend the Institute: ions.

Use HDMI2.0cables when using HDMI2.0 INTERfaces.

The device on/off

Connect to the power source, and press the “ ” button to turn on the device.
When the device is on, press the “ ” button to turn off the device.

Remote control pairing

Place the remote control within 10 cm of the device, press “ and “ ” simultaneously until an indicator light begins flashing. This means that the remote control enters the pairing mode. When a “Ding” is heard, the connection is successful.
If the pairing fails, it will exit after 30 seconds. Repeat the above steps after exiting.

Automatic focus adjustment/Remote focus adjustment ®°

When the automatic focus adjustment function is enabled, the frame will be adjusted automatically when you turn on the device or move it to another location.
Enable automatic focus by pressing “,:**+"** After holding on to the “ **+**” button to enable manual focus adjustment, you can manually adjust the focus by pressing the “left/right” button or the “VOL+/-” button. After the adjustment, you can press other buttons to exit.

Automatic keystone correction

The frame will be adjusted automatically when you move the device to another location.

When the automatic obstacle avoidance function is enabled, the frame will automatically avoid obstacles if there are obstacles in the projection area. When the automatic screen alignment function is enabled, the frame will automatically match the screen if there is a 16:9 or 16:10 screen in the projection area.

Press the ” 0″ button on the remote control to enter the “Keystone Correction” page. Select “Auto Keystone Correction” to enable the automatic keystone correction function. Select “Manual Keystone Correction” to adjust the four points and the size of the frame.

The Google Assistant

Ok Google
You can enable the Google Assistant function by pressing the “ ” button on the remote control.
Through voice control, you can quickly access entertainment, control smart devices, get answers onscreen, and perform other operations.

Bluetooth speaker

Use mobile Bluetooth settings to search for “XGIMI Horizon Pro” or “XGIMI Horizon” to pair with the device and play songs.
If you need to turn off the projection frame during music playback, you can press the “Power” button and select “Display Off” .

More settings

At any interface, you can press the “0” button on the remote control to quickly set your device. To configure more settings, go to the “All Settings” page. The main settings are described as follows:

• Brightness and color Select a brightness mode, such as standard, bright, eye-protection, and adjust the brightness level. If the “Environmental Adaptation” function is enabled, the device can automatically adjust the brightness based on the ambient brightness.
• Image mode Select different image modes in different scenarios, such as movies, football, office, and game, to adjust the image parameters of the video or signal source. The low-latency option is the available in-game mode.

• Sound effect
Select different sound effects in different scenarios, such as movies, music, and sport, to enjoy the optimal sound experience.
• Focus calibration
If the automatic focus adjustment function is not as good as before after long-term use, you can tune the automatic focus adjustment function through “Focus Calibration”. Note: When calibrating, make sure that the device is in the front projection state and that it is 1 to 2 meters away from the wall or screen.
• Keystone calibration If you are not satisfied with the effect of the automatic keystone correction function, you can recalibrate the automatic keystone correction function through “Keystone Calibration”.
Note: When calibrating, make sure that the device is in the front projection state and that it is 1 to 2 meters away from the wall or screen.
• Gyro calibration
If the automatic keystone correction function is not as good as before after long-term use, you can recalibrate the gyro through “Gyro Calibration” to optimize the effect of automatic keystone correction.
Note: Make sure that the device is placed horizontally during, calibration.

Online upgrade

Check the latest version and upgrade the system through “Settings” -> “Device Preferences” -> “About” -> “System Update”.

Chromecast Built-in

Chromecast built-in
Available in PCs, tablets, mobile phones, and other devices. Quickly project the audio and video content to the TV through the “Chromecast icon” of the supported mobile application.
The projection will not be interrupted when you make calls or send messages. Also, you don’t need to worry about battery consumption.
You can use the Chrome browser on your Android phone or PC to project the entire frame to the TV.

Important Precautions

Correct use of the device:

• Do not face lens into eyes because the strong projector light may cause injury to the eyes.

• Do not block the air inlet/outlet of the device in order to avoid damage to internal electronic devices arising from normal heat dissipation failure of the device.

• Do not wipe the lens directly with cleaning tools including paper and cloth in order to avoid damage to the lens. Please clean up the dust on the lens surface through clean air blowing.

• Do not wash the device with chemicals, detergents, or any liquid in order to prevent the circuit board from being corroded by rainwater, moisture, and mineral-containing liquids.

• Keep the device and its components and accessories out of reach of children. Make sure that the device is used in a dry and ventilated environment.

• Do not store the device in overheated or overcooled places, because extreme temperatures will shorten the life of electronic devices. Place and use the device in an environment of 0°C-40°C.
  Do not put the device into any heating equipment (such as dryer and microwave oven) for drying.

• Do not firmly extrude the device or place barriers on it or its back to avoid damage to the device.

• Do not throw, strike, or sharply vibrate the device to avoid damage to the internal circuit board.

• Do not try to disassemble and assemble the device yourself. If any issue occurs, please contact the after-sales service of XGIM I. Do not repair any product on your own. If the device or any component cannot work properly, consult the after-sales service of XGIMI in a timely manner or return it to the factory for repair.

FCC warning for projector

The device meets provisions of part 15 of FCC rule. Operation meets the following 2 conditions: (1) the device will not cause harmful interference, and (2) the device must accept any interference received, including interference that may result in accidental operations. User manual or operating instructions shall remind users that intentional or unintentional modification and replacement of radiators without explicit approval from the responsible compliance party may prevent the user from operating the device. If the manual is provided in a form other than paper, such as, provided in computer disk through the Internet, then the information required in the section can be included in the manual in the alternative form under the premise that users can have access to the form information.
Notes: the device has been tested to meet restrictions of part 15 of FCC rule on B-class digital device. These restrictions are aimed at providing the effective prevention of harmful interference in a residential installation. If installation and use are not made according to the instructions, the device will generate and radiate radio frequency energy, and may cause harmful interference to radio communication. However, there is no guarantee that interference will riot occur in a particular installation. If the device does cause harmful interference to radio or television reception (determined by stopping and starting the device), it is suggested that users should attempt to correct the interference by one or more of the following measures:
-Reposition direction of receiving antenna.
-Increase the distance between the device and the receiver.
-Connect the device into an outlet on a circuit different from that to which the receiver is connected..
-Consult distributors or experienced radio/television technicians to seek help
-This device is acting as a slave and operating in the 2.4 GHz (2402-2480 MI Iz, 2412-2462 MI Iz) band or 5 GI Iz (5.180 GHz-5.240 GHz, 5.260 GHz-5.320 GHz, 5.500 GHz-5.700 GHz, 5.745 GHz-5.825 GHz) band.

CE Maintenance for projector

1. Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
2. The product shall only be connected to a USB interface of version USB2.0.
3. The adapter shall be installed near the equipment and shall be easily accessible.
4. EUT Operating temperature range: -10°C-40°C.
5. Adapter: The plug considered as disconnect device of adapter Power supply and ADP (rating): (-) Input: AC 100-240 V 50/60 Hz 4.0 A Output: DC 19.0 V 13.16 A ® Input: AC 200-240 V 50 Hz 2.0 A Output: DC 19.0 V 11.58 A
6. The device complies with RF specifications when the device is used at a distance of 20 cm away from your body.
7. To prevent possible damage to hearing, do not listen at high volume levels for long periods.
8. Use care with the earphone may be excessive sound pressure from earphones and headphones can cause hearing loss.

Declaration of Conformity Chengdu XGIMI Technology Co., Ltd hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
This product is allowed to be used in some of the EU member states.
For example, the device can be used in the following Member States:
Operations in the 5.15-5.25 GHz band are restricted to indoor usage only.
This Frequency applies to the following Member States or the geographical area within a Member State where restrictions on putting into service or requirements for authorization of use exist.

Radiation Exposure Statement projector

For remote control, this device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
The transmitter shall not be placed or operated in conjunction with any other antenna or transmitter.
For the LED projector, the device meets FCC radiation exposure limits specified f or uncontrolled environments. In the installation and operation of the device, the distance between the radiator and body should be at least 20 cm.
Notes: 5150-5250 MHz frequency range is only for indoor use.
This Frequency applies to the following Member States or the geographical area within a Member State where restrictions on putting into service or requirements for authorization of use exist.
Disposal instructions for used products:
The product is designed and manufactured with high-quality materials and components that are recyclable.
the symbol on the product indicates that it is protected under the Directive 2012/19/

‘ (July use attack units/accessories specified ur prodded by the manufacturer (such as the exclusive supply adapter etc).

• Beware that this product may emit harmful light radiation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>