XGIMI Horizon 4K Supported Movie Projector User Guide
- June 3, 2024
- XGIMI
Table of Contents
XGIMI Horizon 4K Supported Movie Projector
Introduction
Please read the Product Instructions carefully before using the product
Thank you for purchasing and using the products of Chengdu XGIMI Technology Co., Ltd. (hereinafter referred to as “XGIMI Technology” or “XGIMI”). You should read the Product Instructions carefully before using this product for both your safety and interests. XGIMI Technology disclaims all responsibilities for any personal injury, damage to property, or other loss that may occur as a result of improper or unsafe use of this product.
About the Product Instructions (hereinafter referred to as the “Instructions”) the copyright of the Instructions belongs to XGIMI Technology. Trademarks and names mentioned in the Instructions belong to their respective right owners. In case of inconformity between the content of the Instructions and the actual product, the actual product shall prevail.
Any objections to any content or clause found within the Instructions should be reported to XGIMI Technology in written form within 7 days after the purchase; otherwise, it will be assumed that you agree to, understand, and accept all the content of the Instructions. Google, Android TV and Chrome cast built-in are trademarks of Google LLC. Google Assistant is not available in certain languages and countries. Availability of services varies by country and language.
Use HDMI 2.0 cables when using HDMI 2.0 interfaces
Device on/off
Connect to the power source, and press the “0” button to turn on the device. When the device is on, press the “0” button to turn off the device.
Features
Remote control pairing
Place the remote control within 10 cm of the device, press”‘:>” and “O” simultaneously until an indicator light begins flashing. This means that the remote control enters the pairing mode. When a “Ding” is heard, the connection is successful. If the pairing fails, it will exit after 30 seconds. Repeat the above steps after exiting.
Automatic focus adjustment/Remote focus
When the automatic focus adjustment function is enabled, the frame will be adjusted automatically when you turn on the device or move it to another location. Enable automatic focus by pressing”, •J” After holding on to the”, •J” button to enable manual focus adjustment, you can manually adjust the focus by pressing the “left/right” button or the “VOL+/-” button. After the adjustment, you can press other buttons to exit.
Automatic keystone correction
When the automatic keystone correction function is enabled, the frame will be adjusted automatically if you move the device to another location.
When the automatic obstacle avoidance function is enabled, the frame will automatically avoid obstacles if there are obstacles in the projection area. When the automatic screen alignment function is enabled, the frame will automatically match the screen if there is a 16:9 or 16:10 screen in the projection area
Press the” O” button on the remote control to enter the “Keystone Correction” page. Select “Auto Keystone Correction” to enable the automatic keystone correction function. Select “Manual Keystone Correction” to adjust the four points and the size of the frame.
Google Assistant
Talk to Google to control your TV using your voice. Press the Google Assistant button on your remote to search for movies and shows, get recommendations to match your mood, get answers, control smart home devices, and more.
Bluetooth speaker
Use mobile Bluetooth settings to search for “XGIMI HORIZON PRO” or “XGIMI HORIZON” to pair with the device and play songs. If you need to turn off the projection frame during music playback, you can press the “Power” button and select “Display Off”.
More settings
At any interface, you can press the “O” button on the remote control to quickly set your device. To configure more settings, go to the “All Settings” page.
The main settings are described as follows:
Brightness and color
Select a brightness mode, such as standard, bright, eye-protection, and adjust the brightness level. If the “Environmental Adaptation” function is enabled, the device can automatically adjust the brightness based on the ambient brightness.
Image mode
Select different image modes in different scenarios, such as movie, football, office, and game, to adjust the image parameters of the video or signal source. The low-latency option is available in game mode.
Sound effect
Select different sound effects in different scenarios, such as movie, music, and sport, to enjoy the optimal sound experience.
Focus calibration
If the automatic focus adjustment function is not as good as before after long-term use, you can tune the automatic focus adjustment function through “Focus Calibration”.
Note: When calibrating, make sure that the device is in the front projection state and that it is 1 to 2 meters away from the wall or screen.
Keystone calibration
If you are not satisfied with the effect of the automatic keystone correction function, you can recalibrate the automatic keystone correction function through “Keystone Calibration”.
Note: When calibrating, make sure that the device is in the front projection state and that it is 1 to 2 meters away from the wall or screen.
Gyro calibration
If the automatic keystone correction function is not as good as before after long-term use, you can recalibrate the gyro through “Gyro Calibration” to optimize the effect of automatic keystone correction.
Note: Make sure that the device is placed horizontally during calibration.
Online upgrade
Check the latest version and upgrade the system through “Settings” -> “Device Preferences”-> “About”-> “System Update”.
Chromecast Built-in
Easily cast your favorite movies, music, and more to your TV with Chromecast
built-in. simply tap the Cast button from apps you already know and love to
stream entertainment from your phone, tablet or laptop to the TV. While you’re
streaming, you can keep using your phone for other things- scroll through
social media, send a text, and even accept calls.
Important Precautions
Correct use of the device
- Do not face lens into eyes because the strong projector light may cause injury to the eyes.
- Do not block the air inlet/outlet of the device in order to avoid damage to internal electronic devices arising from normal heat dissipation failure of the device.
- Do not wipe the lens directly with cleaning tools including paper and cloth in order to avoid damage to the lens. Please clean up the dust on the lens surface through clean air blowing.
- Do not wash the device with chemicals, detergents, or any liquid in order to prevent the circuit board from being corroded by rainwater, moisture, and mineral-containing liquids.
- Keep the device and its components and accessories out of reach of children.
- Make sure that the device is used in a dry and ventilated environment.
- Do not store the device in overheated or overcooled places, because extreme temperatures will shorten the life of electronic devices. Place and use the device in an environment of O’C-40″C.
- Do not put the device into any heating equipment (such as dryer and microwave oven) for drying.
- Do not firmly extrude the device or place barriers on it or its back to avoid damage to the device.
- Do not throw, strike, or sharply vibrate the device to avoid damage to the internal circuit board.
- Do not try to disassemble and assemble the device yourself. If any issue occurs, please contact the after-sales service of XGIMI.
- Do not repair any product on your own. If the device or any component cannot work properly, consult the after-sales service of XGIMI in a timely manner or return it to the factory for repair.
FCC warning
The device meets provisions of part 15 of FCC rule.
Operation meets the following 2 conditions:
- The device will not cause harmful interference
- The device must accept any interference received, including interference that may result in accidental operations.
User manual or operating instructions shall remind users that intentional or unintentional modification and replacement of radiators without explicit approval from the responsible compliance party may prevent the user from operating the device. If the manual is provided in a form other than paper, such as, provided in computer disk through the Internet, then the information required in the section can be included in the manual in the alternative form under the premise that users can have access to the form information.
Notes: the device has been tested to meet restrictions of part 15 of FCC rule on B-class digital device. These restrictions are aimed at providing the effective prevention of harmful interference in a residential installation. If installation and use are not made according to the instructions, the device will generate and radiate radio frequency energy, and may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If the device does cause harmful interference to radio or television reception (determined by stopping and starting the device), it is suggested that users should attempt to correct the interference by one or more of the following measures:
- Reposition direction of receiving antenna.
- Increase the distance between the device and the receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult distributors or experienced radio/television technicians to seek help
- This device is acting as a slave and operating in the 2.4 GHz (2402-2480 MHz, 2412-2462 MHz) band or 5 GHz 5.180 GHz-5.240 GHz, 5.260 GHz-5.320 GHz, 5.500 GHz-5.700 GHz, 5.745 GHz-5.825 GHz) band.
As with any bright source, do not stare into the direct beam, RG2 IEC 62471-5:2015.
CE Maintenance
- Use careful with the earphone maybe excessive sound pressure from earphones and headphones can cause hearing loss.
- The product shall only be connected to a USB interface of version USB2.0.
- Adapter shall be installed near the equipment and shall be easily accessible.
- EUT Operating temperature range: 0’C-40″C.
- Adapter: The plug considered as disconnect device of adapter
Power supply and ADP (rating):
- Input: AC 100-240 V 50/60 Hz 4.0 A
- Output: DC 19.0 V 13.16 A
- Input: AC 200-240 V 50 Hz 2.0 A
- Output: DC 19.0 V 11.58 A
- The device complies with RF specifications when the device is used at a distance of20 cm away from your body.
- To prevent possible damage to hearing, do not listen at high volume levels for long periods.
Declaration of Conformity
Chengdu XGIMI Technology Co., Ltd. Here by declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
This product is allowed to be used in some of EU member states. For example, the device can be used in the following Member States:
Operations in the 5.15-5.25 GHz band are restricted to indoor usage only. This Frequency applies to the following Member States or the geographical area within a Member State where restrictions on putting into service or requirements for authorization of use exist.
IC Warning
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions
- This device may not cause interference
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement
For remote control, this device complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment.
The transmitter shall not be placed or operated in conjunction with any other antenna or transmitter.
For the LED projector, the device meets FCC radiation exposure limits specified for uncontrolled environments. In the installation and operation of the device, the distance between radiator and body should be at least 20 cm.
Notes: 5150-5250 MHz frequency range is only for indoor use. This Frequency applies to the following Member States or the geographical area within a Member State where restrictions on putting into service or requirements for authorization of use exist.
Disposal instructions for used products
The product is designed and manufactured with high quality materials and components that are recyclable. This symbol on the product indicates that it is protected under the Directive 2012/19/EU. Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter etc.). Beware that this product may emit harmful light radiation. Excessive blue light of display products can cause eye fatigue, insomnia and other adverse reactions. This product is a low blue TUV Rhineland certified products, by reducing the blue light component technology, can reduce eye fatigue and other adverse reactions to some extent. In order to protect your eyesight, it is still recommended avoiding watching for a long time. If you feel eye strain, it can be relieved by looking into the distance or doing eye health exercises.
FAQ’s
Does this accommodate 3D movies?****
Yes. The projector will support 3D if you update it to the most recent version (V2.1.64). The home page offers a link to the most recent version, or you can follow these instructions: Checking for updates in Settings—Device preferences—About—System update.
What is the largest image size that this projector can produce?****
300” Max
What kind of socket can I use if I want to utilize an external power bank? Type C?****
It includes a separate external power bank that is not a type C power bank.
How far away must you be to project a 100-inch image?****
8.7ft. the throw ratio is 1.2, meaning the projector needs to be 8.7 feet away for a 100-inch projection.
How long will the electricity last if it’s portable?****
Enough mobility to move around the house! Must always be linked to a power source when in use
How long is the guarantee on this?****
1 year on XGIMI Horizon 1080p FHD Projector
Can I use my US-purchased Xgimi Horizon product anywhere in the world?****
Yes. HDMI and Ethernet are both universal. A plug adaptor is a need when travelling, especially if you want to use dial-up or maybe DSL. The ability of this product to access the internet or play movies is unaffected by the manufacturer’s country of origin.
Does xgimi horizon have 3D? How to watch a 3D movie?****
I think the pro horizon can do 3D.
Is this a projector with a short throw?****
No, it is not, however it is a projector of excellent quality.
How far “off center” from the screen can this be and yet allow keystone adjustment? (I must stay away from a ceiling fan)****
It was put up much about 45 degrees off center, and the image is fantastic.
The same manufacturer’s current halo projector I own does not support 3-D Blu-ray discs. Do 3D blue rays work with this projector?****
Yes, with a software update. 3d will work.
Can you still use the xgimi speakers while adding a sub-woofer for more bass?****
Yes, you may use HDMI OR optical to connect to a surround sound system. Also Bluetooth.
Does it support type C mirroring? Can I use a USB type-C connection to connect my MacBook laptop to a projector?****
Yes. My iPad Pro through USB connects with no problems.
What kind of electrical outlet is needed? (Two or three prongs)****
For the power supply, the US version calls for a 3-prong outlet.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>