IFOOTAGE FH-K5 Komodo K5 Lightweight Fluid Head User Manual
- June 3, 2024
- IFOOTAGE
Table of Contents
IFOOTAGE FH-K5 Komodo K5 Lightweight Fluid Head User Manual
Thank you for purchasing an iFootage product.This manual is designed for KOMODO Fluid Head . To get the most of your Fluid head, please read the manual fully before operating the equipment and keep the manual safe for future reference.
Features
- Lightweight fluid head Is suitable for camera and video recorder.the load Is up to SKG with 2.4KG of rebound force.
- With security anti-pin to prevent the equipment slidlng over and falling from the unlocked quick release plate.
- Locking knobs for fluid pan and tilt movements.
- Bubble spirit level.
- Built-in balance spring to help to support the equipment’s weight.
- Precise CNC machined structure provides lightweight but solid structure.
- Built-in high precision bearing mechanism and original designed bearing mechanism and original designed bearing mechanism providing the high loading capability keeping smoother shoot.
- Novel appearance, low gravity, lightweight with convenience.
- The high-quality anodized black finish enhances the durability and rigidity.
- Low temperature resistance.
List of articles
Do not lose any of the articles listed above
Technical Data
Parts Name
User Guide and More Functions
How to mount the fluid head
The head is supplied with a removable handle “A”. It can be mounted either side of the head by screwing to the fluid head body. User to be able to adjust the angle of the handle.
Install either side of the quick release plate ·e· on the fluid head according to the marker. Then fasten the quick release plate locking button.
How to mount the quick release plate
Use a coin or4mm wrench to tighten the 1/4″screw to the bottom of the camera.
Adjust the quick release plate accordingly to balance the camera after the
mounting.
How to install the camera on the fluid head
Install the quick release plate to the dovetail slot and lock the quick
release plate button.
How to balance the camera on the fluid head
- Loosen the tilt locking button
- Slide the camera backwards and forwards until the whole section of camera and fluid head is at the same level.
How to adjust the angle
The fluid head moves 360° pan and +90°/-83° tilt by rotating the handle of the
fluid head.
How to remove the camera a from the fluid head
Loosen the quick release plate locking button, push the anti-pin pin and
remove the camera from backside.
How to mount Komodo fluid head
Maintenance
- Please check the tightness of each screw or joint section before use.Do not over tighten them as this will damage the parts.
- Do not over loosen the handle as It will drop out.Gently adjust the balance or remove safely.Do not over tighten it as it will damage the threading.
- After operation in rain,snow or in water,clean the head with a damp cloth. Let the head rest In place for a while and pack It after the moisture evaporates.
- Handle all parts gently and avoid external pressure during
* Notice: Please note that the camera, tripod and mini crane are not Included In the packages and only for Illustrative purposes.
- I Footage reserves the r1ght of rectifying all hardware and software specification at any time with out any notice, If there are any differences between the contents of the Instruction and the product, please regard the actual product as the truth.
STATEMENT
ifootage and its associates will not be held responsible for the use or misuse of any of the !Footage products or any direct, Indirect, punitive, incidental, special consequential property or life damage responsibility.The risk of users or any other person using this product shall be borne by the user. This will not affect your legal rights.
Rollei GmbH & Co. KG In de Tarpen 42
D-22848 Norderstedt Germany
Service-Hotline:
+49 40 270750277
Mail: service@rollei.com
www.rollei.com
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>