BLACK DIAMOND Recon X User Manual

BLACK DIAMOND Recon X

INTRODUCTION

Thank you for purchasing a BLACK DIAMOND RECON X! The BLACK DIAMOND RECON X is an easy to use avalanche transceiver with reliable high performance. The BLACK DIAMOND RECON X comes with the following features:

•  3 antenna technology
•  Large, circular receiving range for a quick and stable signal detection
•  Perfect signal processing, even in difficult situations (multiple burials)
•  Mark function
•  Comprehensive self-check
•  Easy to use group check
•  Automatic interference protection
•  Auto search-to-send
•  iPROBE support
•  Device management via the PIEPS APP

WARNING!
An avalanche beacon does not protect against avalanches! Detailed knowledge of avalanche prevention is as indispensable as regularly practicing victim searches in an emergency. The following procedures and tips relate only to special usage in conjunction with the BLACK DIAMOND RECON X. The order of events in an emergency – as explained in specialist publications and material from avalanche courses – must be followed. With the BLACK DIAMOND RECON X you have a product that is state of the art in terms of safety and user- friendliness. Despite this, the BLACK DIAMOND RECON X can pose risks if used inappropriately or incorrectly. We refer to possible hazards in chapter 2 and with safety notes placed throughout the operating manual.

This operating manual is intended to ensure the safe use of the BLACK DIAMOND RECON X. The safety instructions in this document must be followed at all times.
Before you use the BLACK DIAMOND RECON X, you must read and understand this operating manual. Black Diamond Equipment is not liable for technical or printing errors in this operating manual, neither is any liability accepted for damage caused directly or indirectly by the delivery, performance or use of this operating manual.

Copyright © Black Diamond Equipment, 09/2022
This translation of the original manual is protected by copyright. All rights, especially the rights of reproduction, distribution and translation, are reserved. No part of this document may be reproduced or stored, processed, duplicated or distributed using electronic systems in any form (photocopy, microfilm or other method) without the written consent of Black Diamond Equipment. Violations may incur criminal penalties.

MARKINGS
In accordance with applicable regulations, the following marks may be found on the BLACK DIAMOND RECON X and/or on the packaging:

• CE mark of conformity indicates fulfillment of relevant EU directives. See Chapter 7. Conformity.
• UKCA mark of conformity indicates fulfillment of relevant UK directives. See Chapter 7. Conformity.
• Mark of conformity that indicates compliance with New Zealand requirements.
• Dustbin symbol: advising users to dispose of waste electrical and electronic equipment separately from unsorted municipal waste.
• FCC ID: indicating the compliance with Part 15, Subpart C of the FCC Rules.
• IC ID: indicating the compliance with Industry Canada’s license-exempt RSS standard(s). Bluetooth® logo: The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Black Diamond Equipment is under license. Other trademarks and trade names are those of their respective owners.
• 12 digit serial number: identifying the device and is used for device registration. The first 4 digits indicate year and week of manufacturing. Serial number is found on the packaging or by connecting to the device with the Pieps app.
• Recycling symbol.
• Battery symbol: indicating battery type and correct position.
• Instruction pictogram: advising users to read the instructions and warnings.
• Black Diamond brand name.
• Black Diamond logo.
• Example of the model name.

LIABILITY

The information contained in this operating manual describes but does not guarantee the features of the product. No liability is accepted for damage caused by

•  improper use
•  failure to follow the operating manual
•  unauthorized modifications of the BLACK DIAMOND RECON X
•  improper work on and with the BLACK DIAMOND RECON X
•  continuing to use the BLACK DIAMOND RECON X despite evidence of wear and tear
•  unauthorized, improperly carried out repairs
•  emergencies, external influences or force majeure

NOTICE
Alterations or modifications not explicitly approved by the manufacturer shall relieve the manufacturer of warranty responsibility and any damage resulting therefrom. Any altered or modified device shall not be used.

WARRANTY CONDITIONS
The manufacturer provides a 2-year warranty covering manufacturing and material defects of the BLACK DIAMOND RECON X from the date of purchase. Exceptions are the battery and carrying system as well as any damage caused by improper use or dismantling of the device by unauthorized persons. Any other warranties and liability for consequential damage are expressly excluded. For warranty claims, please take proof of purchase and a description of the fault to the point of sale. Register your BLACK DIAMOND RECON X in the PIEPS APP (iOS, Android) or at my.pieps.com and get:

•  a warranty extension from 2 to 5 years!
•  important information on software updates!

MANUFACTURER ADDRESS & SUPPORT
Black Diamond Equipment, Ltd. 2084 East 3900 South, Salt Lake City, UT 84124 USA
Europe: Black Diamond Europe Hans-Maier-Straße 9, 6020, Innsbruck, Austria
For technical problems, please contact customer support at: blackdiamondequipment.com

INTENDED USE
The BLACK DIAMOND RECON X serves as an avalanche victim search device (avalanche transceiver) for the localization of buried persons and must only be used as intended. Any other use requires the written consent of Black Diamond Equipment. Improper use can put individuals at risk and result in the device being damaged. The BLACK DIAMOND RECON X is not an automatically functioning device with partly automated functionalities – for this reason, the BLACK DIAMOND RECON X may only be commissioned after having read and understood the documentation. Failure to use the device as intended will result in all liability and warranty claims being rejected. The BLACK DIAMOND RECON X is to be operated only under the conditions of use described in the documentation.

TARGET GROUP AND PREVIOUS KNOWLEDGE
An avalanche beacon should be part of the avalanche emergency equipment of everyone who ventures off from the secured piste into open, unsecured terrain (e.g. ski touring, freeriding, mountain rescue operations, etc.). Users of the BLACK DIAMOND RECON X must meet the following conditions:

• Read and understand this operating manual.
• Users with impaired vision must ensure that they can read the labelling and displays on the device as well as the instructions in the documentation without problem.
• If users with impaired hearing are unable to hear the acoustic signal, they must ensure that they can correctly interpret the display indications in accordance with the instructions in the operating manual.

ESSENTIALS
The BLACK DIAMOND RECON X meets the current state of technology and the applicable health and safety regulations. However, incorrect operation or misuse can give rise to hazards for:

•  the life and health of the users or third parties,
•  the BLACK DIAMOND RECON X and property of the user,
•  the efficient use of the BLACK DIAMOND RECON X.

TECHNICAL SPECIFICATIONS

SAFETY
This operating manual is structured in accordance with the applicable EU regulations and contains safety instructions. Each individual is personally responsible for complying with the safety instructions. This chapter contains all safety-related information. Should anything be unclear or difficult to understand, please contact our support team.

SIGNAL WORDS USED IN THE SAFETY INSTRUCTIONS

• DANGER Imminent threat to the life of individuals A safety instruction with the signal word DANGER indicates an imminent threat to the life and health of individuals!
• WARNING Risk of personal injury (serious injuries) and possible material damage A safety instruction with the signal word WARNING indicates a dangerous situation which could affect the health of individuals.
• CAUTION Risk of material damage and possible minor risk of injuryA safety instruction with the signal word CAUTION indicates a possibly dangerous situation which could primarily result in material damage.
• NOTICE This symbol with the text NOTICE indicates supporting information.

GENERAL SAFETY RULES AND OBLIGATIONS
The following safety rules and obligations apply in general for using the BLACK DIAMOND RECON X:

•  The BLACK DIAMOND RECON X must only be used in its original, unmodified, and undamaged condition.

•  It is forbidden to alter or change the BLACK DIAMOND RECON X without the written permission of Black Diamond Equipment.

•  Do not attempt to repair damage or malfunctions without authorization. Instead, contact our support, who will tell how to proceed. The BLACK DIAMOND RECON X must not be used until the
  damage/malfunction has been repaired.

•  The safety and operating instructions in the operating manual must be followed at all times.

INTERFERENCE WARNINGS
All avalanche beacons are very sensitive to electrical and magnetic influence. Black Diamond beacons are designed to minimize interference, but it is the user’s responsibility to follow some basic best practices:

•  Avoid carrying unnecessary electronics.
•  Maximize distance between the beacon and any sources of electronic, magnetic, and metallic interference (such as phones, smart watches, radios, heated garments, and electronic airbags.)
•  A minimum distance of 20 cm for a beacon in SEND mode, and 50 cm in SEARCH mode is recommended.
•  When in SEND mode, carry the beacon on the front side of your body.
•  When in SEARCH mode, maximize distance by holding the beacon in a partially outstretched arm in front of your body.
•  Advanced planning should be considered to ensure that smart watches, heated gloves, and similar items that are likely to remain very close to a searching beacon are kept at least 50cm away.
•  All device firmware should be kept current.

RESIDUAL RISKS | WARNINGS
Even though the BLACK DIAMOND RECON X has been designed with maximum care and all safety-related facts have been taken into consideration, residual risks may exist and must be evaluated by means of a risk assessment. All residual risks and warnings from the risk assessment are listed in this chapter.

• DANGER Risk of device loss
  Always carry the device in the included carrying system Always leave the device cord-secured!

• DANGER Risk of a not transmitting device due to enabled Bluetooth
  The Bluetooth mode is used for device management and training mode only! Never use the Bluetooth mode in avalanche terrain!

• DANGER Risk of battery explosion due to improper battery types or damaged batteries
  Only use batteries of type “3x Alkaline (AAA) LR03 1.5 V or 3x Lithium (AAA) FR03 1.5V” Never use damaged batteries!
  The use of Lithium batteries must be confirmed in the PIEPS APP!

• DANGER Risk of incorrect battery capacity reading due to improper battery types
  Only use batteries of type “3x Alkaline (AAA) LR03 1.5 V or 3x Lithium (AAA) FR03 1.5V “! The use of Lithium batteries must be confirmed in the PIEPS APP!

• WARNING Risk of hearing damage due to the high noise level
  Never hold the device directly next to your ear! A minimum distance of 50 cm is recommended.

• CAUTION Risk of pinching
  Be aware of a pinching risk when using the switch!

• CAUTION Risk of device malfunction or damage due to extreme temperatures
  Do not expose the device to extreme temperatures outside of the operating limits! Store the device protected from direct sunlight! Extreme temperatures can result in malfunction or damage!

• NOTICE The user must read the operating manual!

PACKAGING

•  1x BLACK DIAMOND RECON X
•  3x Alkaline (AAA) LR03 1.5 V
•  1x BLACK DIAMOND RECON X carrying system
•  1x Quick Start Guide

Check that the contents are complete and undamaged after unpacking. If necessary, contact your point of sale or our support team. Please recycle the packaging materials in an environmentally friendly manner (paper to paper, plastic to plastic, etc.)

GENERAL DESCRIPTION

FEATURES

DEVICE FEATURES

• (1A) LCD display (backlight)
• (1B) OFF/SEND/SEARCH Slider
• (1C) Slider lock

DISPLAY FEATURES

• (2A) Direction indication
• (2B) Distance indication
• (2C) Transmit symbol
• (2D) Battery capacity/type
• (1D) MARK Button
• (1F) Speaker
• (1G) Transmit control LED
• (2E) MARK (marking possible)
• (2F) Active transmitting antenna
• (2G) Number of burials (1-3)
• (2H) Number of burials (4 or more)
• (2J) Transmitter marked
• (2K) Bluetooth active
• (1H) Battery compartment

CARRYING SYSTEM
BLACK DIAMOND recommends using the included carrying system (3A). In order to protect the beacon’s display, carry the beacon with its display facing inwards (3B) and the transmit control LED (1G) visible (3C). Secure the device through the lanyard hole with the included lanyard (3D).

Risk of device loss
Always carry the device in the included carrying system! Always have the device cord-secured!

SWITCHING ON | SELF-CHECK | SEND MODE

• Despite a comprehensive self-check, a beacon mode check (SEND check and SEARCH check) is obligatory prior to every tour! Every member of the group must verify that both the SEND and SEARCH modes are functioning correctly.
• Switching on: Move the slider lock (1C) to the left and the slider (1B) upwards into the position SEARCH. Then release the slider lock (1C) and move the slider (1B) downwards, until it locks in the position SEND.
• Risk of incorrect switch position
• Always physically verify the Slider is securely locked into position: ‘SEND’. The Slider (1B) should not move unless the Slider Lock (1C) is dis-engaged.
• The display shows firmware version, battery capacity, self-check progress (4A), self-check result (4B), group check countdown (4C) and finally the SEND display with the active transmitting antenna (4D).
• The device is now in SEND mode, the transmit control LED (1G) is blinking.
• A minimum distance of 5 m from other devices and all electronic, magnetic and metallic sources of interference should be kept during the self-check.
• If the self-check is successful, “OK” is indicated on the display (4B). In the event of a device warning, an alert signal sounds and the display indicates “E” in combination with a number (4E). For error codes, see chapter 6.1.

GROUP CHECK FEATURE
The Black Diamond Recon X provides the option for a group check. This does not replace the standard mode check, but is a useful feature with larger groups. In group check mode the receiving range is limited to 1 m.

 | Group check regular

BLACK DIAMOND RECON X

Check: frequency

---|---
Start| Press and hold the MARK button (1D) during the

group check countdown (3-2-1)

Result

| ·         “Distance indication“ = OK

·         “ER“ = error (frequency not according to

standard)

End| Release button

The Regular group check is sufficient for checking modern, digital devices with 3 antennas.

HELPFUL SUPPORTING FEATURES

Interference protection

•  Auto-Antenna-Switch | Protection in SEND mode
• If the transmitting antenna is impacted by external interference, the other antenna will take over the transmit function. The BLACK DIAMOND RECON X always transmits with the strongest possible signal!
•  Signal Verification | Protection in SEARCH mode
• Only a verified 457kHz signal is indicated. The BLACK DIAMOND RECON X is excellent at filtering out ghost signals!

External interference and distance recommendations
All beacons are very sensitive to electrical and magnetic sources of interference. Due to this, all manufacturers recommend keeping a minimum distance from electronic, magnetic and metallic sources of interference (mobile phone, radio, keys, magnetic closures, smart watches, heated gloves, electronic airbags etc.): Minimum distance in SEND mode: 20 cm | Minimum distance in SEARCH mode: 50 cm

PIEPS iPROBE-Support
Beacons with iPROBE-support* get automatically deactivated when probing with the electronic probe PIEPS iPROBE. This prevents signal overlaps and the next- strongest signal is automatically shown on the display of the receiving beacon. Maximum support in multiple burials!

•  The iPROBE-Support is automatically activated on beacons with firmware version V1.1 or lower.
•  The iPROBE-Support is automatically deactivated on beacons with firmware version V1.2 or higher and can be activated via the PIEPS APP.

Beacons with iPROBE-Support: BLACK DIAMOND RECON X, BLACK DIAMOND GUIDE/RECON BT, BLACK DIAMOND RECON LT, PIEPS PRO BT/POWDER BT, PIEPS MICRO, PIEPS DSP PRO/SPORT/PRO ICE, PIEPS DSP STANDARD/TOUR ≥ v5.0, PIEPS FREERIDE.

SEND  SEARCH
Move the slider lock (1C) to the left and the slider (1B) upwards in the position SEARCH.
Note: the slider does not lock in the SEARCH position.

SEARCH SEND
Move the slider (1B) downwards, until it locks in the position SEND.

Secondary avalanche | Auto-Search-to-Send
Auto-search-to-send, or `Auto-revert’ mode, provides an additional layer of protection against secondary avalanche scenarios. By default, it is disabled and can be enabled in the PIEPS APP device manager. Once enabled, the device switches from SEARCH mode to SEND mode automatically after a certain time without movement (burial). The function provides the following characteristics:

•  Signal time-controlled initialization
•  Short switching timeout
•  Long warning phase with alert and countdown prior to switching
•  Continued alert, also after switching

Operation
With auto revert enabled, while in SEARCH mode and after the predetermined time and without the presence of a signal, the transceiver will begin the auto revert process. As shown below, a countdown with an associated sound will begin. If at any time during the countdown the mark button is pressed, the clock will be reset and the transceiver will remain in SEARCH. If a signal is encountered during the countdown, the timer will also be reset and the transceiver will remain in SEARCH.

ARCH MODE | SEARCH STRATEGY

In case of emergency
A buried person has the greatest chance of being rescued by an efficient companion rescue. In the event of an accident, the following applies: KEEP CALM, OBSERVE, ALERT, ACT WITH COORDINATION!

1. Keep calm & get an overview
   •  Are there any other risks?
   •  How many victims?
   •  Determine the primary search area!
2.  Make a brief emergency call
   •  EU 112, AT 140, CH 1414, IT 118, FR 15, NA 911
3.  Burial search
   •  Signal search (eyes + ears, beacon)
   •  Coarse search (starting with initial signal)
   •  Fine search (closer than 5 m on the surface)
   •  Pinpointing (systematic probing)
4. Systematic digging
5.  First Aid
6.  Rescue

Signal search
Start searching in the primary search area for the initial signal detection as well as for visual/acoustic signals. All participants, observers included, must switch their devices to SEARCH mode (or to standby mode)! Make sure to follow the external interference distance recommendations and hold the beacon a minimum of 50 cm (20″) from all electronic, magnetic, and metallic sources of interference. The BLACK DIAMOND RECON X has a circular receiving range that allows a correct indication of direction and distance from the point of initial signal detection – a specific method such as turning/rotating is not necessary. All signals of the burials that are within the maximum receiving range are received simultaneously.

Walk the search strip width in the search area quickly. The recommended search strip width for the BLACK DIAMOND RECON X is 50 m. The display shows “no signal”. As soon as signals are received, the distance and direction to the strongest signal are shown on the display. The number of victims located within the receiving range is indicated by the number of human figures.

Coarse search
Follow the directional arrow quickly and check for a decreasing distance reading. Change the search direction by 180° in case of an increasing distance reading.

Fine search
From a distance of 5 m, the search speed should be notably reduced (50 cm/s). At the same time, start working close to the surface of the snow. To prevent confusion during the fine search, the direction indication disappears below a distance of 2 m. Reduce the search speed again and find, by cross-like movements, the position of the lowest distance reading. A dynamic acoustic signal output supports the fine search: the closer you are to the sending transceiver, the sound will decrease in period and increase in frequency.

Do an accurate direction adjustment before the direction arrow disappears! You are then moving to the transmitting beacon in best coupling position and save time during the cross-like movements.

Pinpointing
Begin at the point of the lowest distance indicated. Always probe perpendicular to the surface. Use your lower hand as a “probe guide” to ensure the probe follows a steady path. Follow a proven system until you have a hit. Communicate a hit clearly to companions. Leave the probe stuck for shoveling guidance.

Move your beacon at a slow, steady speed of about 10 cm/s, keep it leveled close to the surface and do not rotate your device. Search along the Y axis, determine the lowest distance value, then follow along the X axis. Always move past the point of the lowest distance to verify the distance tendency. Mark the point of the lowest distance reading and start pinpointing.

Multiple burials | MARK function
A multiple burial is indicated clearly on the display by the number of small human figures (2G, 2H).Marking is possible from a distance reading of 5 m and is indicated by the MARK symbol (2E). Press the MARK button (1D) briefly to “hide” the localized transmitter. A successful flagging is confirmed by a frame around the human figure (2J). The display then indicates the direction/distance to the next strongest signal inside the receiving range. If there are no further signals within the receiving range the display indicates “no signal”

Continuous wave indication | old-device-indication
Old analog transceivers are transmitting a continuous wave in addition to the pulse signal. To keep an impact at a minimum, it is recommended to step a few meters away after marking such a transmitter.

The BLACK DIAMOND RECON X identifies a continuous wave and supports visually by flashing human figures.

DEVICE MANAGEMENT WITH THE PIEPS AP P
Bluetooth and the PIEPS APP allow a straightforward device management (e.g. software update) and additionally provide a handy training mode. Get the PIEPS APP (Android Play Store, iOS App Store), connect your BLACK DIAMOND RECON X and take advantage of all features! The user is responsible for keeping their beacon firmware up to date. Black Diamond recommends checking for updates at the beginning of every season, and checking monthly when equipment is in regular use. To enable Bluetooth, press and hold the MARK button (1D) while switching on the beacon.

Risk of a non-transmitting device due to enabled Bluetooth The Bluetooth mode is supposed for device management and training mode only. Never use the Bluetooth mode in avalanche terrain! Settings are available for the following features:

•  Admin Lock ON/OFF
•  Group check ON/OFF
•  Auto-Search-to-Send timeout (ON/OFF 60 s/90 s/120 s)
•  iProbe Support ON/OFF
•  Battery Type (Alkaline/Lithium)
•  Factory Reset

Further useful content in the PIEPS APP

•  Training scenarios
•  Basic knowledge
•  Software Updates
•  Manuals
•  Product Information

TROUBLESHOOTING, MAINTENANCE, STORAGE, DISPOSAL

the

battery capacity, type and polarity (+,-). Replace the batteries. Take the device to your retailer.

E0| High current

This error disappears after the self-check.

| Take the device to your retailer.
E1| System configuration

This error remains on the display.

The device is not serviceable.

| Take the device to your retailer.
E2 E3 E4| Transmitter or receiver or amplifier

The error disappears after the self-check.

The device has limited functionality in SEND or SEARCH mode.

| Repeat the self-check in an area free from interference (outdoors) and check for electronic, magnetic and metallic sources of interference. In case

of a permanent error take the device to your retailer.

E5| Processor

This error remains on the display. The device is not serviceable.

| Take the device to your retailer.
E6| Distance and/or direction indicator

This error disappears after the self-check. The device has limited functionality regarding the distance and/or direction indication.

| Take the device to your retailer.
E8| Accelerometer

This error disappears after the self-check. The device has limited functionality: Auto- Search-to-Send is not possible.

Group check pro-mode is not possible.

| Take the device to your retailer.
E9| Bluetooth

Bluetooth activation and/or connection not possible. The avalanche beacon function is working.

Is not checked during the self-check, occurs only

during Bluetooth activation.

| Retry to activate the Bluetooth mode.

In case of a permanent error take the device to your retailer.

BATTERY REPLACEMENT

Change the batteries as soon as the battery capacity indication (2D) shows an empty battery. Always change all three batteries at once! To do so, open the battery compartment (1H) and be sure to insert the new batteries in the correct orientation. For battery disposal, follow the applicable regulations in your country.Risk of explosion from incorrectly used batteries

Risk of incorrect battery capacity indication
Only use batteries of type “Alkaline (AAA) LR03 1.5 V“ or “Lithium (AAA) FR03 1.5V“! The use of Lithium batteries must be confirmed in the PIEPS APP!
CLEANING
Use a damp cloth without cleaning agents to clean the device Flowing water, steam or cleaning agents must not be used to clean the device. To do so could impede operation of the device.

STORAGE

Store the device in a dry room at room temperature. If the device is not used for extended periods of time (summer months), it is recommended to remove the batteries from the battery compartment. The warranty does not cover damage caused by leaking batteries. Risk of device malfunction or damage due to extreme temperatures Do not expose the device to extreme temperatures outside the operating limits! Store the device protected from direct sunlight! Extreme temperatures can result in malfunction or damage!

DISPOSAL

Please note that the device is an electronic device. It cannot therefore be disposed by public waste management companies. Dispose of the device in accordance with the law in your country.

CONFORMITY

EUROPE
Black Diamond Equipment declares that the radio equipment type BLACK DIAMOND RECON X is in compliance with Directives: EMC 2014/30/EU, RED 2014/53/EU, RoHS 2011/65/EU, LVD 2014/35/EU.

UK
Black Diamond Equipment declares that the radio equipment type BLACK DIAMOND RECON X is in compliance with Electromagnetic Compatibility Regulations 2016, Radio Equipment Regulations 2017, The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, Electrical Equipment (Safety) Regulations 2016 The full text of the EU and UK declarations of conformity is available at the following internet address: www.blackdiamondequipment.com/DOC

USA/CANADA
Manufacturer: Black Diamond Equipment | Type/Model: BD Recon X

USA: FCC Notice, Cautions and Statement
This device complies with the Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residual installation. This equipment generates, uses and can radiate frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

•  Reorient or relocate the receiving antenna
•  Increase the separation between the equipment and receiver
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
•  Consult the dealer or an experienced radio/TV technician for help

To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR)

This device complies with Industry Canada’s license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

References

• Black Diamond® Equipment | Climbing, Skiing & Trail Running Gear
• PIEPS Service Portal
• Black Diamond® Equipment | Climbing, Skiing & Trail Running Gear
• Conformity – PIEPS GmbH
• Warranty | Repairs | Black Diamond Equipment

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>