Black Diamond ONSIGHT 375 Onsight LED Headlamp User Manual

Black Diamond ONSIGHT 375 Onsight LED Headlamp

• North America : Black Diamond Equipment, Ltd. 2084 East 3900 South Salt Lake City, UT 84124
• Europe: Black Diamond Europe Hans-Maier-Straße 9 6020, Innsbruck, Austria
• www.BlackDiamondEquipment.com
• Black Diamond Equipment, Ltd. 2024 M14207_D

FEATURES

This product is protected by one or more of the following patents. Other patents pending.

INSTRUCTIONS FOR USE ONSIGHT LED HEADLAMP

IMPORTANT: Follow all instructions carefully and keep them for future reference.
Battery Life : Your battery life will vary depending on:

• Brand and freshness of batteries
• Length of time the headlamp has been off
• Temperature
• Settings used
  • ANSI FL-1 Standard: Runtime to 10% of initial output.
  • Reserve: Additional time the lamp will produce usable light for low-intensity activities (measured to .25 Lux @ 4 meters.)

BATTERIES

• Use AAA alkaline, lithium, or Black Diamond BD 1800 Li-Ion rechargeable batteries.
• Do not mix old and new batteries or different battery types
• Dispose of the device/batteries under applicable local laws and regulations

DUAL-FUEL COMPATIBLE
This lamp is compatible with the rechargeable lithium-ion BD
1800 Battery which is sold separately.

USE / MODES

(see accompanying illustrations)

STORAGE AND TRANSPORTATION

Remove batteries during storage and transport (see accompanying illustrations )

CARE AND MAINTENANCE

(see accompanying illustrations)

TROUBLESHOOTING

If the headlamp does not work:

• Check that the batteries are oriented correctly and touching the contacts
• Replace the batteries
• Check the contacts and connections for corrosion and clean if necessary
• Work the switch several times No luck? Contact your Black Diamond Dealer or www.BlackDiamondEquipment.com.

WARNINGS

• A responsible adult must supervise use by children under the age of 12
• Inspect your headlamp for proper operation before using and, for critical situations, carry a second light and sufficient spare batteries
• Do not stare directly into the beam or shine it directly into others’ eyes. Intense light can damage your eyes or the eyes of those around you. Black Diamond Equipment is not responsible for the consequences, whether direct, indirect, or accidental, or for any other type of damage arising or resulting from the use of its products.
• LEDs can generate enough radiant heat to damage or melt some materials. Never place any material over the lens while the light is on. The digital lock should be utilized whenever the light is being transported or not in use (i.e. in a pocket, backpack, etc).

LIMITED WARRANTY

For 3 years following purchase or delivery, unless otherwise indicated by law, we will warrant to the original retail buyer that our products are free from defects in materials and workmanship as originally sold. The Product will be repaired or replaced at our discretion. We do not warrant products that show normal wear and tear or that have been used or maintained improperly, modified or altered, or damaged in any manner. We reserve the right to require proof of purchase or delivery for all warranty claims. This Black Diamond product meets the requirements of the EMC (electromagnetic compatibility) Directive 2014/30/EU and the RoHS Directive 2011/65/EU. It also meets the requirements for Electromagnetic Compatibility Regulations 2016 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 as brought into the UK law. The Declarations of Conformity for this product may be viewed at www.blackdiamondequipment.com/DOC

FCC STATEMENT

NOTE: This product has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio, television, cell phone, or avalanche beacon reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the product and the receiver.
• Turn the product off or to a different setting.

Industry Canada ICES-005 Compliance Label: CAN ICES-005 (B)/NMB-005 (B)

References

• Black Diamond® Equipment | Climbing, Skiing & Trail Running Gear
• dequipment.com/DOC
• Black Diamond® Equipment | Climbing, Skiing & Trail Running Gear
• Black Diamond® Equipment | Climbing, Skiing & Trail Running Gear

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>