LSI MW9005 Network Camera User Manual

: June 3, 2024
: LSI

Table of Contents

LSI MW9005 Network Camera
Power supplies
Batteries
Solar panel
Relay
USB Drive
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LSI MW9005 Network Camera

LSI-MW9005-Network-Camera-PRODUCT

LSI LASTEM data loggers share a range of common accessories for their installation, communication and power supply.

Sensors and data logger arms for indoor applications

When M-Log or R-Log (see Compatibility) are used in indoor applications, they can be mounted on an arm ﬁxed on a tripod, together with a series of sensors.

| BVA305| Sensors and data logger arm. Fixing to BVA304 tripod
---|---|---
Dimensions| 850x610x150 mm
Number of sensors| N.6 using threaded screws + N.1 ring for ESU403.1-EST033 sensors
Weight| 0.5 Kg
Compatibility| ELO009, ELR510.1, ELO515.1
| BVA315| Sensors and N.2 data logger arm. Fixing to BVA304 tripod
Dimensions| 400x20x6 mm
Number of sensors| N.22 using threaded screws + support for N.4 ESU403.1-EST033 sensors
Weight| 1.6 Kg
Compatibility| ELO009, ELR510.1, ELO515.1
| BVA304| Three arm tripod
Occupied area size| Max 1100×1100 mm
Maximum height| 1600 mm
Weight| 1.6 kg
Bag for transportation| BWA048

Power supplies

When the data logger (see Compatibility) isn’t supplied with an ELF box, we recommend having external power supply units.

| BSC015| Power supply converter/battery charger for indoor applications.
---|---|---
Voltage| 230 Vca -> 9 Vdc (1,8 A)
Connection| On data logger power plug
Protection degree| IP54
Compatibility| ELO008, ELO009, ELR510.1
| DEA260.1| Power supply converter/battery charger for indoor applications. Free-wires cable to data logger
Voltage| 230 Vca -> 14 Vdc (0,6 A)
Connection| On data logger terminal board
Protection degree| IP54
Compatibility| E-Log, ELO008, ELR515.1, Alpha-Log
| DEA251| Power supply converter/battery charger for outdoor applications. N.2 outputs
---|---|---
Voltage| 85…264 Vca -> 13.8 Vcc
Power| 30 W
Max output current| 2 A
Connection to sensors or data logger| On free terminals board
Protection degree| IP65
Protections| · Short Circuit

· Overvoltage

· Overcurrent

Operative temperature and humidity| -30…+70 °C ; 20…90 %
Compatibility| ELO008, E-Log, Alpha-Log, ALIEM
| DYA059| Bracket for DEA251 on poles of 45…65 mm diameter

RS485 modules

Required to connect RS485 sensors (up to 3 signals) to Alpha-Log’s RS485 port.

| TXMRA0031| Three signal RS485 active star wiring hub. The unit has three independent RS485 input and output channels, each with their own driver, which can transmit sig- nals across 1200 m of cable on each channel.
---|---|---
Input| N.3 RS485 Channel: Data+, Data-
Output| N.1 RS485 Channel: Data+, Data-
Speed| 300…115200 bps
ESD protection| Yes
Power supply| 10…40 Vdc (not insulated)
Power consumption| 2.16 W
| EDTUA2130| Three signal RS485 active star wiring hub.
Input| N.3 RS485 Channel: Data+, Data-
Output| N.1 RS485 Channel: Data+, Data-
Maximum current| 16 A
Voltage| 450 Vdc
Protection grade| IP68

Radio signals repeaters

****	EZB322	Zig-Bee radio signals repeater
Mounting	Universal AC socket
Power supply	85…265 Vac, Universal AC socket
Protection	IP52
Environmental limits	0…70°C
Compatibility	R-Log
EXP401	IP64 radio signals repeater “Store and forward”. Power supply:

Radio signals receiver

**| EXP301**| Radio signal receiver from radio sensors or from EXP820 RS-232 Output compatible with data loggers (M/E-Log)

· Maximum number of receivable sensors 200

· Battery NiCd 9 V

· Power supply 12 Vdc

· Antenna included

---|---|---
| DWA601A| Serial cable L=10 m for connection of EXP301 to E/M-Log data logger RS-232 port
| DYA056| Support for EXP301 to pole D=45…65mm

Batteries

External batteries are required for E-Log, Alpha-Log operation when not powered from the mains and or to increase the M-Log and R-Log battery life. Batteries are usually mounted inside ELF boxes and connected to the data logger using the terminal power supply input.

| MG0558.R| 12 V Pb 18 Ah battery
---|---|---
Type| Rechargeable Sealed Lead-Acid battery
Dimensions| 181x76x167 mm
Weight| 6 Kg
Compatibity| ELF345-345.1-340-340.1-340.5-340.8

box

box

Mini-DIN Adapters

To connect sensors with free-wires to data loggers with min-DIN input (ELR510.1, ELO009), these adapters are needed:

| CCDCA0010 CCDCA0020| Terminal board/mini-DIN adapter+cable
---|---|---
N. contacts| CCDCA0010: 4 + shield

CCDCA0020: 7 + shield

Cable| L=2 m

RS232 cables, USB interface

To connect data loggers to PC via RS232 or USB cable. In each pack of M-Log, E-Log and R-Log, the ELA105.R serial cable and the DEB518.R USB adapter are included.

| ELA015.R| L= 1,8 m serial cable

Included in each M-Log, E-Log and R-Log pack

---|---|---
| DEB518.R| RS232->USB converter

Included in each M-Log, E-Log and R-Log pack

RS485 converters, TCP/IP
To obtain a long cable (more than 1 Km) beetween the data logger and the PC. It is possible to use a RS232-485 converter. A TCP/IP connection to the Ethernet web, allows to send data to the PC within a network also connected via the Internet. These devices can be mounted inside ELF boxes.

| DEA553| Industrial secure serial port to Ethernet device server with 1xRS-232/422/485 and 2×10/100Base-T(X)
---|---|---
Input| RS232/422/485 (DB9)
Output| Ethernet 10/100Base-T(x) Auto MDI/ MDIX
Protocols| ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP, V1/V2c, HTTPS, SMTP
Power supply| 12…48 Vdc
Consumption| 1.44 W
Operative Temperature| -40…70°C
Fixing| DIN bar
Protection| IP30
Weight| 0,227 kg

Converter RS232/RS485 – > optical fibre

****	TXMPA1151	Serial converter RS232 / optical fibre mono modal
TXMPA1251	Serial converter R485 / optical fibre mono modal

Dropping resistors

| EDECA1001| Five 50 ohm-resistors kit (1/8 W, 0.1%, 25 ppm) to convert 4…20 mA -> 200…1000 mV
---|---|---

Modem GPRS, 3G, 4G. UMTS Router. Wi-Fi Module

For remote connections, 3G-4G modems are available. Via modem, is possible to send (“push mode”) data to FTP server or, using the program P1-CommNET, to LSI LASTEM GIDAS database. These devices can be mounted inside ELF boxes.

| DEA718.3| Modem GPRS – GSM-850 / EGSM-900 / DCS-1800 / PCS-1900 MHz Quad-Band.

GPRS class 10

---|---|---
Operative temperature| -20…70°C
Power supply| 9…24 Vcc from data logger
Consumption| Sleep: 30 mA, during com. 110 mA
Weight| 0.2 kg
Compatibility| E-Log
| ELA110| Connection cable between E-Log and DEA718.3 modem
| MC4101| Fixing bar for DEA718.3 in ELF boxes
| DEA609| Modem adapter DEA718.3 / external antenna DEA611

| DEA611| External antenna for 3G, LTE modem TXCMA2200 double gain GPRS/UMTS/LTE
Frequencies| GSM/GPRS/EDGE: 850 / 900 / 1800 /

1900 MHz. UMTS/WCDMA: 2100 MHz

LTE: 700 / 800 / 1800 / 2600 MHz

Free license ISM band| Field 869 MHz, UHF Frequency
Irradiation| Omnidirectional
Gain| 2 dBi
Power (max)| 100 W
Impedance| 50 Ohm
Cable| L=5 m
Fixing accessory| Included
Compatibility| TXCMA2200, DEA718.3 (adapter)
| TXMPA3770| High-Gain 2.4 GHz Wi-Fi USB adapter
---|---|---
Wireless data rate| Up to 150 Mbps
Port| USB 2.0
Security| WEP, WPA, WPA2, WPA-PSK/WPA2-PSY

Encryptions

Standard| IEE802.11
Environmental limits| 0…40°C (Not condensing)
Weight / Dimensions| 0.032 kg / 93.5 x 26 x 11 mm

| TXCRA2200 TXCRA2210 TXCRA2200.6 TXCRA2200.D| Industrial 4G/LTE Wi-Fi router, 3 different models depending on number of LAN ports (e.g. for data logger and camera with ethernet) and region covered
Mobile| 4G (LTE), 3G
Max data rate| LTE: 150 Mbps. 3G: 42 Mbps
WiFi| WPA2-PSK, WPA-PSK, WEP, MAC Filter
Ethernet WAN port| N.1 (config. to LAN) 10/100 Mbps
Ethernet LAN port ()10/100 Mbps| · N.1 (TXCRA2200, TXCRA2200.6, TXCRA2200.D)

· N.4 (TXCRA2210)

Network protocols| TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH,

DHCP, Telnet, SMNP, MQTT, Wake On Lan (WOL)

Region (operator)| · TXCRA2200, TXCRA2210: Global

· TXCRA2200.6: Europe, the Middle East, Africa, Korea, Thailand, Malaysia

· TXCRA2200.D: EuropE, THE Middle East, Africa

Frequencies| · TXCRA200, TXCRA2210: 4G (LTE- FDD) : B1, B2, B3, B4, B5, B7, B8,

B12, B13, B18, B19, B20, B25, B26, B28. 4G (LTE-TDD) : B38, B39, B40, B41. 3G: B1, B2, B4, B5, B6, B8, B19. 2G : B2, B3, B5, B8

· TXCRA2200.6: 4G (LTE-FDD) : B1, B3, B7, B8, B20, B28A. 3G : B1, B8. 2G : B3, B8

· TXCRA2200.D: 4G (LTE-FDD) : B1, B3, B5, B7, B8, B20. 4G (LTE- FDD) : B1, B3, B7, B8, B20. 3G : B1, B5, B8. 2G : B3, B8

| TXRMA4640| Satellite Modem (GPS+GLONASS L1 freq.) Thuraya M2M
---|---|---
Narrowband IP| UDP and TCP/IP
Frequency band| TX 1626.5 to 1675.0 MHz

R X 1518.0 to 1559.0 MHz

| TXCRA1300| Industrial router 3G/LTE dual SIM, removable magnetic antenna. Input RS232/485 for communication of independent devices (e.g. data logger with serial output, camera with ethernet output)
Mobile| 3G
Max data rate| 3G: 14 Mbps
SMS| Sì
Ethernet LAN port| N.1 LAN port, 10/100BT
Network protocols| PPP,PPPoE,TCP, UDP,DHCP,ICMP,NAT, DMZ, RIPv1/v2,OSPF, DDNS, VRRP, HTTP, HTTPs,DNS, ARP,QoS,SNTP,

Telnet

Long distance VHF radio

VHF radios allow easy, cost-free connections, several kilometers away. Via radio it is possible to connect several data log-gers with MASTER/SLAVE logic or to connect a data logger to a PC. These devices can be mounted inside ELF boxes.

| TXRMA2132| 160 MHz radio modem for PC or data logger connection, VHF-500 mW erp; includes 3 elements Yagi antenna. Transmitting part of the system, connected with ELA110+ELA105 to data logger, included in M-Log, E-Log, R-Log (MASTER).
---|---|---
Operating band| 169.400. 169.475 MHz
Output power| 500 mW ERP
Number of channels| 12.5 – 25 – 50 kHz
Radio data rate (Tx/Rx)| 4.800 bps@12.5kHz, 9600 bps@25kHz, 19200 bps @50 kHz
Power supply| 9…32 Vcc
Consumption| 140 mA (Rx)
Operative temperature| -30…70°C
Antenna| Included. N.3 elements antenna Yagi. L=10 m cable
Line-of-sight| 7…10 km
Weight| 0.33 kg without antenna
Communication port| RS232, RS485
| TXRMA2131| 160 MHz radio modem for PC or data logger connection, VHF-200 mW erp; includes dipole antenna. Receiving part connected with ELA105.
Main features| See TXCMA2132
Antenna| Included Dipole antenna L=5 m cable
| ELA110| Connection cable radio/data logger
| ELA105| Serial cable L=1.8 m. To be quoted to connect TXMA2131 to PC. Included in each package of M-Log, E-Log and R-Log (MASTER) for data logger connection.
| DEA260.1| 230 Vca/12Vcc power supply for radio TXRMA2131 PC side
| DEA605| Serial adapter null-modem 9M/9F
| DEA606| Serial adapter null-modem 9M/9M

Solar panel

For applications where mains power is not available or where a double power supply is required, the data logger can be powered by a photovoltaic panel. In these cases it is advisable to place the data logger inside an ELF345-345.1 box that in-cludes DYA115 regulator that doesn’t have to be supplied separately. When a solar panel supply is present, an external bat-tery must be housed in the ELF345 box model MG0558.R (18 Ah) or MG0560.R (44 Ah), chosen according to the autonomy required and the availability of hours of sunshine. The solar panel is mounted on a pole through a tiltable support (DYA064). Alternatively, the ELU001 box is available, which includes a 20 W panel mounted on its front panel.

| DYA101| 60 Watt solar panel|
---|---|---|---
Power| 70 Wp
Operative voltage (VMP)| 16.4 V
VOC voltage| 22.4 V
Dimensions| 813×535 mm
Weight| 5.2 Kg
Tecnology| Monocristalline
Frame material| Aluminium
Cable| L=5 m
Regulator (DYA115)| · included inside ELF345-345.1 boxes

· Inside Alpha-Log

| DYA064| Tiltable support for solar panel fixing to poles of diam. 45…65 mm Weigth: 1.15 kg

S hockproof case to contain data loggers in portable applications

For portable applications, data loggers can be mounted inside IP66 cases to be protected against shocks, water, dust and atmospheric agents. Inside the case can be also be housed the communication device.

| ELF432| Portable IP66 shockproof case. Complete with rechargeable battery (18 Ah) and power supply/battery charger (230 Vca/13,8 Vcc)
---|---|---
Dimensions| 520 x 430 x 210 mm
Weight| 12 kg
Compatibility| ELO008, ELR515.1, ELO515.1, E-Log,

Alpha-Log

IP66 boxes for data logger fix installations

For fix outdoor installations, data loggers can be mounted inside IP66 enclosures that give protection against shocks, water, dust and atmospheric agents. Each box houses the relative power supply system as well as specific accessories, and has the predisposition to house the communication device that can be chosen from the list of Accessories. Each box can be equip-ped with a support for pole or wall fixing.

| ELF345| IP66 box. Complete with regulator for photovoltaic panels. Compatibility with 18 or 44 Ah batteries
---|---|---
Power supply| From solar panel using regulator
Solar panel regulator| Included
Dimensions| H 502 x L 406 x D160 mm
Weight| 7 kg (battery excluded)
Material| Fiberglass
Compatible batteries (not included)| MG0558.R (18 Ah), MG0560.R (44 Ah)
Compatibility| ELO008, ELO515.1, E-Log, Alpha-Log
| ELF345.1| IP66 box. Complete with regulator for photovoltaic panels and 110-230 Vca battery charger power supply. Compatibility with 18 or 44 Ah batteries.
Solar panel regulator| Included
Power supply| 110-230 Vca-> 13.8 Vcc

Thermal magnetic switch. Power: 50W

Thermal magnetic switch. Power: 50W

· N.8 female connectors (7-pin) for analog signals

· N.2 female connectors (4-pin) for pulse signals

· N.1 female connector (7-pin) for power supply

---|---|---
| ELF340.7| IP66 box. Complete with 110-230Vca-> 13.8 Vdc power supply and 2 Ah battery and 230/24V transformer. With N.5 Relays for actuations (MG3023.R type) and IN-OUT terminal for analogue signals
Power supply| 110-230 Vac-> 13.8 Vdc 30W

230Vac/24Vac 40VA Thermal magnetic

Relay| N.5 Relays (MG3023.R type)
IN-OUT signals terminal board| Terminal for analog signals input

N.7 IN signals

N.7 OUT signals

| ELF340.8| IP66 box. Complete with 110-230Vca-> 13.8 Vdc power supply and terminal board for up to N.3 RS485 signals. Compatibility with 18 or 44 Ah batteries. Used to receive digital signals
Power supply| 110-230 Vca-> 13.8 Vdc 50W

Thermal magnetic

Dimensions| H 502 x L 406 x D 160 mm
Weight| 7,5 Kg
Battery| 2Ah rechargeable, included
Compatibility| ELO008, ELR515.1, ELO515.1, E-Log,

Alpha-Log

| ELF344| IP66 box. Complete with 110-230Vac-> 13.8 Vdc power supply, 2Ah battery and 230 Vac/24 Vac transformer for heated sensors
Power supply| 85-264 Vac-> 13,8 Vdc 2A 30W
Transformer| 230Vac/24Vac 4.1 A 100VA
Dimensions| H 502 x L 406 x D 160 mm
Weight| 7.5 Kg
Battery| 2Ah rechargeable, included
Compatibility| ELO008, ELR515.1, ELO515.1, E-Log,

Alpha-Log

| ELF347| IP66 box. Complete with 110-230Vac-> 13.8 Vdc power supply, 2Ah battery and 85-266 Vac/24 Vdc transformer for ALL IN ONE heated version sensors
Power supply| 85-264 Vac-> 13,8 Vdc 30W
Transformer| 85-266Vac/24 Vdc 6.25 A150 W
Dimensions| H 502 x L 406 x P 160 mm
Weight| 7,5 Kg
Battery| 2Ah rechargeable, included
Compatibility| E-Log, Alpha-Log
| DYA074| Support for IP66 enclosures H 502 x L 406 x P160 mm to pole Ø 45…65 mm
---|---|---
| DYA072| Support for IP66 enclosures H 502 x L 406 x P 160 mm to wall
| DYA081| Door lock for ELFxxx boxes
| MAPSA1201| Protection tile for ELFxxx boxes. Dimensions: 500 x 400 x 230 mm
| SVSKA1001| Fixing kit for A-Log in ELFxxx boxes when E-Log is already installed
| MAGFA1001| Cable gland for ELF340-340.7-345-345.1-345.3-344-347 box and RJ45 / Ethernet

Carrying cases

To transport data loggers and their accessories, LSI LASTEM supplies the following cases.

| BWA314| Shockproof case, watertight (52x43x21 cm) for data loggers and probes Weight:3.9 kg
---|---|---
BWA319| Shockproof case with wheels, watertight (68x53x28 cm) for data loggers and probes

Weight: 7 kg

| BWA047| Soft bag for data logger transport Weight: 0.8 kg
| BWA048| Bag to transport BVA304 tripod and stands Weight: 0.4 kg

Relay

Data logger versions with terminal inputs can switch external devices on/off via their digital outputs. The voltage available at the outputs corresponds to the supply voltage of the data logger (normally 12 Vcc). In order to convert the output into a clean On/Off contact, LSI LASTEM provides relay suitable for mounting inside ELF boxes

| MG3023.R| Relay for On-Off actuation of the digital output
---|---|---
Maximum switching voltage Minimum switching voltage Contact type

Min. switching current

| 250 Vac/dc

5 V (at 10 mA)

2 PDT

10 mA (At 5 V)

USB Drive

****	XLA010	USB Pen drive 3.0 Industrial Grade, Flash type MLC
Capacity	8 Mb
Power consumption	0.7 W
Operative temperature	-40…+85 °C
Vibration	20G @7…2000Hz
Shock	1500G @ 0.5ms
MTBF	3 million hours

Data logger protections

	EDEPA1100	Protection unit (SPD) for power line, single phase 230 V.
Mounting	DIN bar
Compatibility	Alpha-Log, E-Log
	EDEPA1101	Protection unit (SPD) for RS-485 communication line.
Mounting	DIN bar
Compatibility	Alpha-Log, E-Log
	EDEPA1102	Protection unit (SPD) for Ethernet communication line.
Mounting	DIN bar
Compatibility	Alpha-Log, G.Re.T.A.