Panasonic ES-RM3B Rechargeable Shaver Instruction Manual

Panasonic ES-RM3B Rechargeable Shaver

Product Specifications

• Model: ES-RM3B
• Usage: Household Rechargeable Shaver
• Power Source: Rechargeable
• Manufacturer: Panasonic

Product Usage Instructions

Important Safety Instructions
Before using the appliance, please read all instructions provided in the manual to ensure safe operation.

Charging

1. Before first use, ensure the shaver is fully charged.
2. When charging, always use the provided USB cable and USB power adaptor.
3. Insert the USB cable into the appliance first, then connect it to the power outlet.
4. After charging, unplug the appliance before use.

Operating the Shaver

1. Ensure the shaver is clean and dry before use.
2. Turn on the shaver using the designated power button.
3. Gently move the shaver over the skin in a circular motion for best results.
4. After use, turn off the shaver and clean it as per the instructions provided.

Cleaning and Maintenance

1. Always unplug the shaver before cleaning.
2. Use a brush to remove hair and debris from the blades.
3. Rinse the shaving head under running water for thorough cleaning.
4. Allow the shaver to air dry before storing it.

Frequently Asked Questions

Q: Can this shaver be used in the shower?
A: No, this appliance is not meant to be used in wet conditions.
Avoid using it in or near water to prevent damage and hazards.

Q: How often should I replace the shaving blades?
A: It is recommended to replace the shaving blades as soon as they show signs of wear or damage to prevent any potential injury during use.

Thank you for purchasing this Panasonic product.
Before operating this unit, please read these instructions completely and save them for future use.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions must always be followed, including the following:
Read all instructions before using this appliance.

DANGER To reduce the risk of electric shock:

1. Except when charging, always unplug this appliance from the electrical outlet immediately after using.
2. Unplug this appliance before cleaning.

WARNING

To reduce the risk of burns, fire,electric shock, or injury to persons:

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
2. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
3. Never operate this appliance when it has a damaged cord or plug, when it is not working properly, after it has been dropped or damaged, or after it has been dropped into water. Return the appliance to an authorized service center for examination and repair.
4. Keep the cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors or operate where aerosol (spray) products are being used.
7. Do not use this appliance with damaged shaving blades and/or foil,as it has the potential to result in facial injury.
8. Always Insert the USB cable into appliance and the USB power adaptor first, then to outlet. To disconnect, turn all controls to “off ” then remove plug from outlet.

The USB power adaptor is sold separately

Safety precautions
To reduce the risk of electric shock, injury, fire, loss of life,and damage to property, always observe the following safety precautions.

Explanation of symbols
The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the notation is disregarded and improper use is performed.

DANGER
Indicates potential hazard that will result in serious injury or death.

WARNING
Indicates potential hazard that could result in serious injury or death.

CAUTION
Indicates potential hazard that could result in minor injury or property damage.

The following symbols are used to classify and describe the type of instructions to be observed.

This symbol is used to alert users to a specific operating procedure that must not be performed.

This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safely.

The illustrations in the manual may differ from the actual item.

WARNING

This product
This product has a built-in rechargeable battery.

Do not throw into flame or heat.

• Doing so may result in electrolyte leakage, overheating or breakage of the battery.

Do not modify or repair.

• Doing so may cause fire, electric shock, or injury.
  →Contact an authorized service center for repair (battery change etc.).
  Never disassemble except when disposing of the product.

• Doing so may cause fire, electric shock, or injury.
  Unplug the USB cable from the main body when cleaning.

• Failure to do so may cause electric shock or injury.

In case of an abnormality or malfunction
Immediately stop using this product and disconnect USB power adaptor if there is an abnormality or malfunction.

•  Failure to do so may cause fire, electric shock, or injury.
  Abnormality or malfunction cases＞

• The main body, USB power adaptor or USB cable is deformed or abnormally hot.

• The main body, USB power adaptor or USB cable smells of burning.

• There is abnormal sound during use or charging of the main body.
  Immediately request inspection or repair at an authorized service center.

Power supply

Do not use this product beyond the rated values of the power supply.

• Doing so may cause fire.
  Fully insert the power plug of the USB power adaptor.

• Failure to do so may cause fire or electric shock.

About the USB power adaptor and USB cable
Do not connect or disconnect the USB power adaptor or USB cable to or from the power supply with a wet hand.

• Doing so may cause electric shock or injury.
  Do not charge this product when the USB power adaptor or USB cable is damaged or when the fitting into the household outlet is loose.
  Do not immerse the USB power adaptor or USB cable in water or wash it with water.
  Do not damage, modify, forcefully bend, pull, twist, or place anything heavy on the USB power adaptor or USB cable.

• Doing so may cause electric shock or fire due to a short circuit.
  Do not charge this product using any USB cable other than the supplied USB cable. Also, do not use any other product with the supplied USB cable.

• Failure to do so may cause burns, electric shock or fire.
  The USB cable provides the overheat protection function. If charging is abnormal or the USB plug (Type-C) heats up, disconnect the power supply,check the socket, and remove any water or foreign objects from the socket.

Use only with USB Power Source on a certified product, such as class 2 power supply.

• It is necessary to separately purchase a power adaptor if required to power this product.
  The Panasonic power adaptor ES-RU1-02
  (Class 2 Power Unit) is recommended.

Clean regularly to prevent dust from accumulating.

• Failure to do so may cause fire due to insulation failure caused by humidity.
  Disconnect the USB power adaptor and wipe with a dry cloth.

Preventing accidents
Do not place within reach of children or infants.
Do not let them use it.

• Doing so may cause an accident or injury due to accidental ingestion of the inner blade, cleaning brush, etc.

CAUTION

To protect the skin
Do not forcefully press the system outer foil on the skin or lips. When there are small bumps on the face or the skin is injured, avoid direct contact with the system outer foil.

• Doing so may cause injury to skin.
  Do not touch the blade section (metallic section) of the inner blade directly with your hands.

• Doing so may cause injury.

Do not forcefully press the system outer foil. Do not touch the system outer foil with fingers or nails when in use.

• Failure to do so may cause injury to skin or reduce the life of the system outer foil.
  Do not use this product for hair on head or any other part of the body.

• Doing so may cause injury to skin or reduce the life of the system outer foil.
  Check the system outer foil for any damage or deformation before use.

• Failure to do so may cause injury to skin.

Note the following precautions
Do not allow needles or any other foreign objects to adhere to the power plug of the USB power adaptor or the plugs of the USB cable.

• Doing so may cause electric shock or fire due to a short circuit.
  Do not charge when the socket is wet.

• Failure to do so may cause fire or electric shock.
  Do not share with your family or others.

• Doing so may result in infection or inflammation.
  Disconnect the USB power adaptor from the household outlet when not charging.

• Failure to do so may cause electric shock or fire due to electrical leakage resulting from insulation deterioration.

Handling of the removed battery when disposing

DANGER

• The rechargeable battery is exclusively for use with this appliance. Do not use the battery with other products.

• Do not charge the battery after it has been removed from the product.

• Do not throw into fire or apply heat.

• Do not solder, disassemble, or modify the battery.

• Do not let the positive and negative terminals of the battery get in contact with each other through metallic objects.

• Do not carry or store the battery together with metallic jewellery such as necklaces and hairpins.

• Never peel off the tube.

  • Doing so may cause fluid leak, overheating, or explosion.
    The battery contains alkaline fluid. If it comes in contact with the eyes, do not rub the eyes, and thoroughly rinse with clean water, such as tap water.

  • Failure to do so may cause loss of vision.
    Consult a physician immediately.

WARNING

After removing the rechargeable battery, do not keep it within reach of children and infants.

• The battery will harm the body if accidentally swallowed.
  If this happens, consult a physician immediately.
  The battery contains alkaline fluid. If it comes in contact with the skin or clothes, rinse off with clean water, such as tap water.

• Failure to do so may cause skin injury.

Important information

Notes

• This WET/DRY shaver can be used for wet shaving using shaving lather or for dry shaving. You can use this watertight shaver in the shower and clean with water.
  The following symbol means suitable for use in a bath or shower.

Warning: Disconnect the USB cable from the shaver before cleaning it in water.

Notes

• Treat yourself to wet lather shaves for at least three weeks and notice the difference. Your Panasonic WET/DRY shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving method.

• Do not bring the system outer foil into contact with hard objects.
  Doing so may damage the blades as they are very thin and deform easily.

• Do not dry the main unit with a dryer or a fan heater.
  Doing so may cause malfunction or deformation of the parts.

• Do not leave the shaver exposed to direct sunlight with the foil frame detached.
  Doing so may deteriorate the waterproof rubber and degrade waterproof function, which may cause to maltunction.

• Store the shaver in a place with low humidity after use. Failure to do so may cause malfunction due to condensation or rust.

• Charge the appliance correctly according to these Operating Instructions. (See page 14 “Charging”.)

• This appliance contains battery that is only replaceable by skilled persons. Please contact an authorized service centre for the details of repair.

• Do not drop this product or subject it to shock, Otherwise, injury may be caused.

• When carrying or storing this product, always attach the protective cap. Failure to do so may cause injury to skin or reduce the life of the system outer foil.

Parts identification

A Main body

1. Protective cap

2. System outer foil

3. Foil frame

4. Foil frame release button

5. Finger rest

6. Power switch

7. Switch lock lamp（ ）

8. Charge status lamp
   （ ）

9. Socket (Type-C)

10. Socket cover

11. Outer foil section

12. System outer foil release buttons

13. Inner blades
    B USB cable

14. USB plug (Type-C)

15. USB plug (Type-A)

16. Cord

Accessory

• C Cleaning brush

Charging

• Before charging, make sure that this product is powered off.

• Attach the protective cap to avoid damaging the system outer foil.

• Do not charge when the socket is wet. Wipe the socket when it is wet before charging.

  1. Open the socket cover, insert the USB cable into the main body and the USB power adaptor.
  2. Connect the USB power adaptor 1 to a household outlet.
  • Check the gradual change in the breathing status of the charge status indicator（ ）.
  • Charging is completed after approx. 1 hour. The charging time may be shortened, depending on the remaining battery level.
    Display during charging
  3. After charging, remove the USB cable and attach the socket cover.
  • Charging the battery for more than 1 hour does not affect its performance.
  • Be sure to close the socket cover when using or washing.

How to confirm that charging is completed

• If the USB plug (Type-C) is removed and then inserted back right after charging is completed, the charge status indicator （ ）turns on and then off in about 5 seconds.

Notes

• You cannot operate this product while charging.

• This product may be charged with adaptors other than the specified one, but Panasonic’s specified adaptor with splash-resistant design should be used to ensure safety.
  The Panasonic’s specified adaptor is not completely waterproof, so do not immerse the adaptor in water.

• If an ineligible USB power adaptor is used for charging or such problems as poor contact of the USB cable occur, the charging time may become longer and the product may even be damaged.

• When this product is used for the first time or when it has not been used for more than 6 months, the operating time may be shortened, or the charge status indicator（ ） may not light on immediately after charging is started.
  However, everything should be back to normal after 8 hours of charging.

• The recommended ambient temperature range for charging is 0 ℃ – 35 ℃ (32 ℉ – 95 ℉). When the room temperature exceeds or falls below the recommended ambient temperature range for charging, the charging time may differ and the battery performance may be degraded.

• The shaver can be used for approximately 2 weeks after it is fully charged.
  (Based on dry shaving for 3 minutes a day at an ambient temperature of 20 ℃ (68 ℉) to 30 ℃ (86 ℉).)
  The number of available days depends on the following conditions:

  • beard thickness
  • pressure applied to the skin
  • use of wet shaving

• If there is noise from the radio or other sources while this product is used or charged, move the product to a different location or charge it with another USB power adaptor.

How to use

Shaving

Press the power switch to start the shaver, and start shaving.

• If the switch lock lamp（ ）blinks, the shaver cannot be started because the power switch is locked.
  Please press and hold the power switch for more than 2 seconds to unlock it.(See page 18.)

• While using the shaver, grip the shaver with your fingers placed on the finger grip position.

How to improve the shaving effect

• Apply the whole system outer foil perpendicularly against the skin and shave by slowly sliding this product over the face against the grain of the beard.
• To prevent damaging the system outer foil, do not shave with only a part of the system outer foil.
• The beard under the chin and around the throat can be shaved better by stretching the skin so the beard will stand.

Turn off the shaver when you have finished shaving.

Notes

• The recommended ambient temperature for using the shaver is not lower than 0 ℃ (32 ℉).
  When the room temperature is lower than the recommended operating temperature, the shaver may stop working.

• Make sure that both inner blades are installed in the shaver.
  If only one inner blade is installed, the shaver may be damaged.

• Do not use shaving cream or facial cleanser that contains detergent. Otherwise, the system outer foil may be clogged.

When the battery level is low
When in use, if the remaining battery is low, the charge status indicator （ ） will blink for about 5 seconds and then turns off after the power is turned off. This indicates that charging is needed.

• After the charge status indicator （ ）starts blinking, you can continue to use the shaver once or twice. (The number of uses may vary with the duration of use and the ambient temperature.)

Operation and display of the switch lock

Locking the power switch

1. Press the power switch.
   • The shaver starts operating.
2. Press and hold the power switch for more than 2 seconds.
   • The shaver stops operating.
     Release the power switch once the switch lock lamp（ ）turns on.
     The power switch is locked
     （After about 5 seconds, the switch lock lamp（ ）turns off.）

Check if the power switch is locked
Press and then release the power switch in the locked state, the switch lock lamp（ ）will blink and then turn off after 5 seconds.

Unlocking the power switch

Press and hold the power switch for more than 2 seconds in the locked state.

• Release the power switch once the switch lock lamp（ ）turns off.
  The power switch is unlocked
  The shaver starts operating.）

Notes

• The power switch cannot be unlocked while the shaver is being charged.

Cleaning

It is recommended to clean the shaver after each use.

Check that the socket cover is closed.

1. Power off the shaver.
2. Apply a small amount of hand soap and water on the system outer foil.
3. Press the power switch to start the shaver.
4. Leave the shaver run for 10 to 20 seconds, and then turn it off.
5. Press the foil frame release button to remove the outer foil section.
6. Clean the shaver with running water.
   • After rinsing with water, shake the main body up and down a few times to remove excess water, and then wipe off the water droplets with a dry cloth.
7. Dry the outer foil section, main body and Type-C socket (charging port) thoroughly by exposure to the air.
   • Leave this product dry in the shade, out of direct sunlight.
8. After the shaver is dried completely, install the outer foil section back to the main body.

Notes

• Be careful not to hit the main body on the sink or any other objects while shaking the shaver to drain the water.
  Otherwise, malfunction may be caused.

• Do not use any other cleaning agents than hand soap.
  Doing so may cause malfunction.

• Do not clean this product with thinner, gasoline, alcohol, or other chemicals. Doing so may cause cracking or discoloration of this product. The enclosure can be cleaned with a soft cloth moistened with tap water or soap solution.

• Do not use salt solution or hot water to wash the shaver.
  Do not soak the shaver in water for a long time.

Cleaning with the cleaning brush

Cleaning with the long bristle end of the cleaning brush
Use the long bristle end of the cleaning brush to clean the system outer foil（ a ）and the main body （ b ）of the shaver.

Cleaning with the short bristle end of the cleaning brush

Use the short bristle end of the cleaning brush by moving it in the direction shown in the right figure (A) to clean the inner blades.

• Do not move the short bristle end of the cleaning brush in the (B) direction. Doing so may damage the inner blades and thus affect their sharpness.
• Do not use the short bristle end of the cleaning brush to clean the system outer foil.

Replacing the system outer foil and the inner blades

• It is recommended to replace the system outer foil once a year and the inner blades once every two years.

Replacement parts
Replacement parts are available at your dealer or Service Center.

Replacement parts for

ES-RM3B

| System outer foil| WES9087
---|---|---
Inner blades| WES9068

Outer foil section

• How to remove
  Press the foil frame release button,and lift to remove the outer foil section.

• How to install
  Insert the right side first, and then insert the left side until it is in place.

System outer foil

• How to remove
  Press the system outer foil release buttons, and pull down the system outer foil.

• How to install
  Align them correctly, and securely attach them together until a “click” sound is heard.

  • The system outer foil cannot be reversely installed.
  • To install it back to the shaver, make sure that the system outer foil is inserted into the foil frame.

Inner blades

• How to remove
  Remove one inner blade at a time.

  • Do not touch the edges (metallic section) of the inner blades in case your hands are injured.

• How to install
  Insert one inner blade at a time until they are fixed in position.

Note

• Do not press the system outer foil release buttons with excessive force.
  Doing so may bend the system outer foil, preventing complete attachment to the foil frame.

FAQ

If the product has not been used for a long time, will the battery performance be degraded?
The battery performance may be degraded. Therefore, if the product has not been used for more than half a year, please fully charge the battery once every half a year.

Will the battery life be affected if the product is charged after each use?
No. However, it is recommended that this product is charged after the battery runs out. The battery life may vary with the usage and storage conditions.

Troubleshooting

If the problems still cannot be solved, contact the store where you purchased this product or a service center authorized by Panasonic for repair.

Battery life
Approximately 3 years. If the operating time is significantly shorter even after a full charge, the battery has reached the end of its life. (The battery life may change due to usage and storage conditions.)
Removing and disposing of the built-in rechargeable battery

ATTENTION:
A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.

This product has a built-in rechargeable battery. Be sure to remove the battery before disposing of this product.

• The battery is to be disposed safely.
• This figure must only be used when disposing of this produc t and must not be used to repair it.
• If you dismantle this product yourself, it will no longer be waterproof, which may cause it to malfunction.
• We recommend seeking the advice of a dealer or Panasonic’s authorized service center before deciding to dispose of this product, so as to extend the service life of this product as much as possible.
• If you decide to dispose of this product but do not want to disassemble this product by yourself to remove the battery,we recommend taking this product to Panasonic’s authorized service center which will remove and recycle the battery.

How to remove the built-in rechargeable battery

• Power off this product before removing the battery.
  Turn on the power and keep the power on until the battery is completely discharged.

• Follow the procedure below to remove the battery:
  Remove the screws 1 to 7 of the outer foil section and the bottom cover.
  Insert a thin screwdriver into the screw hole to remove the bottom cover 8.
  Use a slotted screwdriver to remove the battery buckle 9 (x2), and push the cam forward at the same time.
  Remove the adhesive tape 0 from the terminal part. Insert a slotted screwdriver into the bottom of the welding joint – until both ends of the battery are separated from the welding joint, and then remove the battery.

• During disassembly, take care not to short circuit the positive and negative terminals of the removed battery and insulate the terminals by applying tape to them.

• If you cannot remove the battery, please contact an authorized service center.

Specifications

Output rating of applicable adaptor (sold separately)| 5.0 V       1.0 A

In compliance with Class 2 power supply with 5.0 V       1.0 A

---|---
Charging time| Approx. 1 hour

This product is intended for household use only.

Federal Communication Commission Interference Statement system

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, install and use in accordance with provided instructions. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received,including interference that may cause undesired operation.

Personal Care & Beauty Care Products
FOR USA ONLY
30-Day Quality

Satisfaction Guarantee
If you are dissatisfied with any Panasonic Personal Care & Beauty Care Products for any reason, simply return it to the place of purchase with a dated proof of purchase, in the original packaging, with all accessories, parts and instructions,within 30 days of the date of purchase, for a full refund.

Abuse or misapplication of this product voids the guarantee.

PRODUCT REGISTRATION
(U.S. customers only)

Go to www.shop.panasonic.com/register and register your product now to receive these benefits:

Safety Notification
We contact our customers in case of recall

Owner Verification
Proof of purchase in case of product theft or loss

Efficient Warranty Service
In case there is a problem with your product Special Offers and Promotions from Panasonic

FOR YOUR CONVENIENCE, WE HAVE ESTABLISHED A TOLL‑FREE (IN USA ONLY) NATIONAL ACCESSORY PURCHASE HOT LINE AT 1-800-332-5368.

IN USA CONTACT:
Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490
Service • Assistance • Accessories
Servicio • Asistencia • Accesorios
https://shop.panasonic.com/personal-care
https://shop.panasonic.com/support
https://www.panasonic.com

C Panasonic Corporation 2024

References

• Product Registration
• Panasonic - Official Consumer Product Support
• Panasonic Australia | Air Con | Cameras | Home Appliances

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>