COROS FD05 POD 2 Water Resistant Watch User Guide
- June 3, 2024
- COROS
Table of Contents
FD05 POD 2 Water Resistant Watch
User Guide
Water Resistant Watch
Model: FD05
Connect your COROS POD 2 to the app/watch
Place your COROS POD 2 on the charging dock. When the status light flashes, it
is ready to connect to the COROS app or your COROS watch.
Connect from the COROS app
https://ad.coros.com/8CNzbuQs5zn
- Ensure that Bluetooth is on and open the COROS app.
- Go to the Profile page and tap the “scan” icon.
- Scan the QR code on the package insert to complete the connection.
- COROS POD 2 automatically connects to your COROS watches if they are also connected to the COROS app.
Connect from your COROS watch
- On your COROS watch, go to “Settings”.
- Then go to “Accessories”.
- Select “Add Bluetooth” to begin searching for available devices.
- Select your COROS POD 2 on the result list to complete the connection.
Charge your COROS POD
- Place your COROS POD 2 on the charging dock.
- The status light on your COROS POD 2 flashes when charging and stops flashing when fullycharged.
- With a full charge, the charging dock holds up to 5 charges.
Charge your charging dock
- Plug the charging cable that came with your COROS POD 2 into the connector on your charging dock.
- Then plug the other end of the charging cable into a USB charger or port.
- The status light on your charging dock flashes when charging and stops flashing when fully charged.
- You can charge your charging dock with or without your COROS POD 2 connected.
- Your COROS POD 2 will be charged first if connected.
Check the battery percentage
From your COROS watch:
- Select a running activity on your watch.
- The battery percentage is on the activity start page.
- You can also check the battery percentage after finishing an activity on the summary page.
From the COROS app
-
Connects your COROS POD 2 to the COROS app.
-
The battery percentage is on the Device page.
-
If your COROS POD 2 flashes green light, the battery percentage is over 5%.
-
If the light flashes orange, your COROS POD 2 has less than 5% battery and can last about 1.5 hours in running activity.
Disconnecting from the charging dock
- If your COROS POD 2 has a solid green light, the battery percentage is over 5%.
- If the light remains orange, your COROS POD 2 has less than 5% battery and can last about 1.5 hours in running activity.
Receive distance and pace when wearing on your shoe
- Connect your COROS POD 2 to the COROS app or your COROS watch.
- Place the clip under the shoelaces with the thin end facing the direction of your run, and secure your COROD POD 2 into the clip.
- Select a running activity on your COROS watch, wait for the POD icon to change to green, and start the run.
Receive advanced running metrics when wearing on your waistband:
- Connect your COROS POD 2 to the COROS app or your COROS watch
- please the clip under the waistband with the light facing out ward and secure and your corer pod 2 into the clip .
- Select a running activity on your COROS watch, wait for the POD icon to change to green, and start the run.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>