Kruger Matz KM0660 Wired Headphones Owner’s Manual

June 3, 2024
Kruger Matz

Kruger Matz KM0660 Wired Headphones

SAFETY INSTRUCTIONS

Read this instruction manual and keep it for future reference. Producer does not take responsibility for damages caused by inappropriate handling and use of the product.

  • Read the instruction manual before first use and keep it for future reference.
  • Minimize the volume on your audio device before connecting the headphones in order to avoid hearing damage from sudden exposure to excessive volume. Keep the volume at a reasonable level throughout entire time of using the headphones. To prevent damage to your hearing, do not raise the volume too high.
  • Do not use the headphones in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, construction sites or on roads where vehicles and bicycles are traveling).
  • Never use the headphones while driving a car, riding a motorcycle or bicycle or operating any other vehicle, as it may cause potential risk to your safety.
  • Stop using the headphones if you feel a tinnitus, hearing discomfort, irritation or have other adverse reactions.
  • Do not attempt to repair this device yourself. In case of damage, contact with an authorized service point for check-up/repair.
  • Do not subject the headphones to strong impact.
  • Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.
  • Protect this product from moisture, humidity, water and any other liquid.
  • Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
  • Never use this device if it is damaged.
  • Use only authorized accessories.

PRODUCT DESCRIPTION

  1. Microphone
  2. Jack 3,5 mm input
  3. Volume knob
  4. LED light ON/OFF button
  5. Microphone mute button

OPERATION

  1. When using the headphones with a PC, laptop or console, connect them to the device using a USB or mini Jack cable (the first option is recommended).
  2. When connecting the headphones to mobile devices (smartphone, tablet, portable console), use a cable with a mini Jack plug. It should be connected to the AUX input on the headphone volume control panel, and then to the AUX input on the external device.
  3. Use volume knob to change the volume.
  4. Use LED ligh ON/OFF button to turn on/off LED lights.
  5. Use microphone mute button to mute the microphone.

SPECIFICATION

RGB lightning
Magnet: neodymium
Speaker size: 50 mm
Impedance: 32 Ohm ±15%
Frequency response: 20 Hz – 20 kHz
Nominal input power: 20 mW
Maximum input power: 30 mW
Microphone: omnidirectional
Sensitivity: -42 dB ±3 dB
SN ratio: 58 db
Cable length: 2,2 m
Input: 3,5 mm, USB
Dimensions: 200 x 175 x 90 mm
Weight: 310 g

LEARN MORE

For more information on this device visit: www.krugermatz.com.
Read owner’s manual carefully before using.
Visit www.krugermatz.com website for more products and accessories.
In case of any doubts or questions reach out to our Frequently Asked Questionssection.

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
Symbols

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.

QR Code

www.krugermatz.com
Kruger Matz Logo is a registered trademark

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals