TUNUO Frameless Recessed-Surface Mount Medicine Cabinet Installation Guide
- June 3, 2024
- tunuo
Table of Contents
TUNUO Frameless Recessed-Surface Mount Medicine Cabinet Installation
installation
Note:
- Keep the plastic corner protectors on until installation is fully completed.
- Take out the mirror cabinet from the wood, keep the three hanging parts removed, and then install it on the wall to fix the mirror cabinet.
- Measure the distance of the mounting hole, Drill holes with a suitable sized drill.And install the pendant on the wall
- Install the top pendant into the slot，then move the anchor to the left and right
- Install the mirror cabinet on the pendant fixed on the wall, and make sure that the pendant at the bottom is installed into the card slot.
- Finally, after determining the position of the pendant on the top, make a hole in the wall and screw it in.
Power Connection Instruction
The mirror comes with a 5 ft power cable that can be directly plugged into the switch for convenient use. It can also be hardwired by cutting off the plug and control the ON/OFF of power via the wall switch.
Warning
Removing the plug connector will invalidate your product warranty. If you would like to test the product function prior to installation, please test the product in any standard plug socket.
Before you start the installation, please ensure that
- the wall where the product is being installed is able to support the weight of the product
- the main electrical supply has been powered off to complete installation
- Green=GROUND wire connect to the ground wire in your box,or to the box as a ground.
- White=Neutral wire connect to the White Neutral wire in your box.
- Black=LIVE wire connect to the Black LIVE wire in your box.
- You would see there three wires with three colors–white,green and black.
- Safely connect these three wires one by one to the wires of the wall switch in your home.
Operation
The sensor button indicator is blue when it is OFF and will turn white when it is ON.
Lighting Color Adjust
Short touch the power button to adjust the lighting color. It has three colors to select, natural light/warm yellow/white light
- Short touch the power button to turn the light ON/OFF. Short touch again to choose the light(natural light/warm yellow/white light).
- Long touch the power button to dim the currently selected light.
- Anti-fog Function On/Off Touch this button in order to turn the defogger ON/OFF.
Read User Manual Online (PDF format)
Loading......