PHILIPS HR3571 1000 W Stainless Steel Brushed Blender User Manual
- June 3, 2024
- Philips
Table of Contents
HR3571 1000 W Stainless Steel Brushed Blender
User manual
-
Motor unit with control knob
-
Rotary knob and preset settings
• MIN/MAX/ON: to turn on the blender and select a blending speed setting.
• OFF: to turn off the blender.
• : to crush ice.
• P: to blend briefly and for easy clean. -
Blender blade unit
-
Sealing ring
-
Blender jar
-
Lid of blender jar
-
Small covering lid
Tumbler (HR3573 only) -
Tumbler lid
-
Tumbler jar
Mill (Available for some countries
ONLY) -
Mill blade unit
-
Mill jar
Before first use
Thoroughly clean the parts that will come in contact with food before you use the appliance for the first time (see chapter “Cleaning”).
Note
• Do not exceed the maximum quantities and processing times indicated in
Fig.5.
• Do not operate the appliance for more than 60 seconds at a time when
processing heavy loads and let it cool down to room temperature for next
operation.
• Do not attempt to process very thick recipes such as bread dough or
mash potatoes.
Blender (Fig 2)
The blender is intended for:
-
Blending fluids, e.g. dairy products, sauces, fruit juices, soups, mixed
drinks, shakes. -
Mixing soft ingredients, e.g. pancake batter or mayonnaise.
-
Pureeing cooked ingredients.
Note
- Never overfill the blender jar above the maximum level indication (1.5 litres) to avoid spillage.
Pulse and ice crushing function
To process ingredients briefly (such as garlic), rotate the rotary knob to the P (PULSE) position.
To crush ice, press the ice crushing button. To stop, turn the rotary knob to the OFF position.
Tip
• To process ingredients very briefly, rotate the rotary knob to the P (PULSE)
position several times.
• To crush ice, press the ice crushing button . To stop, the ice crushing
button again or turn the rotary knob to the OFF position.
• Never use the pulse function longer than a few seconds at a time.
Tumbler (Fig 3)
Make your smoothies or shakes directly with the tumbler. Remove the
blade unit and attach the lid of the tumbler. Then you can bring the
tumbler out and enjoy directly.
Note
• Never overfill the tumbler jar above the maximum level indication to
avoid spillage.
• Never fill the tumbler jar with soft drinks to avoid spillage.
Cleaning (Fig 6)
Easily cleaning the blender jar: Follow the steps: 1 2 3 4.
Note: Make sure to rotate the rotary knob to P (Pulse) position a few
times.
Motor overheat protection
This appliance is equipped with overheat protection. If the appliance
overheats, it switches off automatically. Unplug the appliance and let
it cool down for 30 minutes. Then put the mains plug back into the
power outlet and switch on the appliance again. Please contact your
Philips dealer or an authorized Philips service center if the overheat
protection is activated too often.
