STIRLING SASK80W Stacking Kit White Instruction Manual
- June 3, 2024
- STIRLING
Table of Contents
Stacking kit WHitE
MODEL NUMBER SASK80W
Instruction Manual
Stacking Kit, White
Warranty Detalis
SASK80W Stacking Kit White
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product- registration/TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT
INFORMATION
The product is guaranteed to be free from defects in workmanship and parts for
a period of 36 months from the date of purchase. Defects that occur within
this warranty period, under normal use and care, will be repaired, replaced or
refunded at our discretion. The benefits conferred by this warranty are in
addition to all rights and remedies in respect of the product that the
consumer has under the Competition and Consumer Act 2010 and similar state and
territory laws.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
Welcome
Congratulations on choosing to buy a STIRLING® product.
All products brought to you by STIRLING® are manufactured to the highest
standards of performance and safety and, as part of our philosophy of customer
service and satisfaction, are backed by our comprehensive 3 Year In Home
Warranty. We hope you will enjoy using your purchase for many years to come.
Safety Instructions
GENERAL WARNINGS
Before the installation and use of the product, carefully read the supplied
instructions.
The manufacturer is not responsible if an incorrect installation and use
causes injuries and damages. Always keep the instructions with your product
for future reference.
WARNING!
To prevent any loss of life, injury or damage to property, follow the safety
notes.
WARNING!
Caution, risk of fire, risk to children!
This product is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the product by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
product.
Before the installation and use of the product, carefully read the supplied
instructions.
The manufacturer is not responsible if an incorrect installation and use
causes injuries and damages. Always keep the instructions with your product
for future reference.
CONDITIONS OF USE
- Domestic use only: This product is intended for household only. It is not suitable for commercial, industrial or trade use. Do not use it for anything other than its intended purpose and only use it as described in this manual.
- Indoor use only: Do not use the product outdoors.
- The stacking kit is suitable for the SHPD80W and SHPD80S heat pump clothes dryers to be stacked on top of the SFLW10W and SFLW10S front load washing machines.
UNPACKING
After unpacking, please dispose of all elements of packaging in a way that
will not cause damage to the environment. All materials used for packaging the
product are environmentally friendly; they are 100% recyclable and are marked
with the appropriate symbol.
CAUTION!
During unpacking, the packaging materials (polythene bags, polystyrene pieces,
etc.) should be kept out of reach of children.
INSTALLATION
-
Installation should be performed by two or more people when installing a clothes dryer on top of a front load washing machine.
-
Do not install the stacking kit if the appliances are connected to power.
-
The stacking kit is suitable for the SHPD80W and SHPD80S heat pump clothes dryers to be stacked on top of the SFLW10W and SFLW10S front load washing machines.
-
Do not stack a front load washing machine on top of a clothes dryer.
-
Do not tilt clothes dryers more than 30° when installing.
-
The stacking kit is suitable for placing clothes with maximum load weight of 16kg. ****
-
Children are prohibited from climb up on or sit on the stacking kit.
-
When installing, you are required to fix all four leveling feet with the fixing blocks provided.
-
The stacking kit but be installed with the front load washing machine be on the ground and not on top of an object.
Product Overview
THE STACKING KIT
ACCESSORIES
Key:
A. Stacking Kit with slide-out shelf (max load weight: 16kg)
Not shown but also included:
- User manual
- Warranty certificate
Accessories:
B. 1 × M6 Screw
C. 6 × M4 Screw
D. 1 × Gasket
E. 1 × Rear fixing block (Right)
F. 1 × Rear fixing block (Left)
G. 1 × Front fixing block (Right)
H. 1 × Front fixing block (Left)
I. 1 × Top panel fixing block
Note: The images in this user manual are for reference only. Your product may appear differently.
Installation Instructions
PRIOR TO INSTALLING THE STACKING KIT
- Ensure that the installation of your front load washing machine is complete and correctly installed according to the Instruction Manual provided with it.
- Please check that all accessories referenced on page 5 are included.
INSTALLATION METHOD
Place the Stacking Kit on the top panel of the front load washing machine with
the handle of the stacking kit at the same side as the control panel of the
drum washer. 
As shown below, align the stacking
kit to the left and right sides of the front load washing machine.
Step 3
Identify and drill 6 positioning holes of stacking kit on the top panel of
washing machine.
Step 4
Drill Ø 3mm holes and fit the 6 × M4 Screws (C) to fix the stacking kit into
the top panel of washing machine. Please ensure that the torque is less than
10nm when tightening.
Step 5
Install top panel fixing block (I). Fix the jack catch of the block on the top
panel of Washing Machine. Align the mounting hole of the block with the
mounting hole of the stacking kit, and fix the block with the M6 Screw (B)
and Gasket (D).
Adjust all four leveling feet of the clothes dryer to allow a 12mm
gap.
Pull
out the slide-out shelf, and place the clothes dryer (with the adjusted
leveling feet) into the frame of the stacking kit. Place the front feet into
the outside of the card slot first, then push the dryer backwards, so that
the foot of the dryer slips fully into the slot.
Step 8
Next, place both the right and left front fixing blocks into their respective
slots on the stacking kit. Please note the distinction between left and right
front fixing blocks.
Step 9
At the rear of the dryer, remove the 2 screws located towards the base of the
dryer.
Place both the right and left rear fixing blocks into the slot of the stacking
kit.
Please note the distinction between left and right rear fixing blocks.
Then proceed to fix two rear fixing blocks with 2 screws removed at the
beginning of Step 9.
Finally, check if there are any loose parts or screws and
that the slide-out drawer pulls out normally without any interference. If
everything is okay, your installation is now complete.
The RCM Mark (Regulatory Compliance Mark) indicates that the product complies with the relevant guidelines of the ACMA as well as corresponding government requirements for the safety of electrical devices
Stacking Kit, White
Repair and Refurbished
Goods or Parts Notice
Unfortunately, from time to time, faulty products are manufactured which need
to be returned to the Supplier for repair.
Please be aware that if your product is capable of retaining user-generated
data (such as files stored on a computer hard drive, telephone numbers stored
on a mobile telephone, songs stored on a portable media player, games saved on
a games console or files stored on a USB memory stick) during the process of
repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending the product for
repair.
You should also be aware that rather than repairing goods, we may replace them
with refurbished goods of the same type or use refurbished parts in the repair
process.
Please be assured though, refurbished parts or replacements are only used
where they meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may
escalate your complaint. Please telephone us on 1300 11 43 57 or write to us
at:
165 Barkly Avenue, Burnley VIC 3121 Australia
Email: support@residentiagroup.com.au
Helpline hours of operation: Mon-Fri 9:00 AM – 5:00 PM
Warranty returns
Should you for any reason need to return this product for a warranty claim,
make sure to include all accessories with the product.
Product does not work?
If you encounter problems with this product, or if it fails to perform to your
expectations, make sure to contact our After Sales Support Centre on 1300 11
4357.
For an electronic copy of this manual, go to
www.stirlingappliances.com.au and
download a copy.
AFTER SALES SUPPORT 0-4, AUS 1300 11 43 57
support@residentiagroup.com.au
MODEL: SASK8OW I PRODUCT CODE: 708529 I 07/2022
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>