STIRLING AP231 Portable Air Purifier Instruction Manual

STIRLING AP231 Portable Air Purifier Instruction Manual

Welcome
Congratulations on choosing to buy a STIRLING® product.
All products brought to you by STIRLING® are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 12 month warranty.
We hope you will enjoy using your purchase for many years to come.

General Safety Instructions

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Make sure you understand all instructions and warnings. Keep the manual in a safe place for future reference, along with the completed warranty certificate, your purchase receipt and the original packaging. If you sell or transfer ownership of this product, pass on these instructions to the new owner. Always follow basic safety precautions and accident prevention measures when using an electrical appliance, including the following:

Electrical safety and cord handling

• Electrical connection: The unit comes with a plug ready for connection to your mains power outlet. Ensure your electrical outlet is properly installed and earthed and complies with your local electrical safety requirements.

• Voltage: Before turning on the air purifier, ensure the electrical voltage and circuit frequency correspond to those indicated on the appliance.

• WARNING! To reduce the risk of electrocution, never immerse the appliance in water or other liquid; never spill liquids into it. Do not place or store it where it can fall or be pulled into a tub or basin. If it accidentally has fallen into water, do not reach into the water. Immediately unplug it, let it dry and have it checked by an authorised service technician.

• Moisture: Do not use the appliance in a bathroom or laundry, or where it can be splashed with water. Do not use it outdoors or operate it with wet hands.

• Power supply cord: Do not kink or damage the cord. Do not pull the cord or place it near a heat source; keep it away from heated surfaces. Always unwind the cord completely to avoid overheating. Run the cord in such a way so that no one will trip over it. Do not cover the cord or run it under carpeting.

• Winding the cord: If winding the power cord, avoid tight bends as this could damage the cord.

• Extension cord/adaptor: Do not modify the length of the power cord or use an extension cord or power adaptor. Do not share a single outlet with other appliances. Improper power supply can cause fire or electric shock.

• WARNING! To reduce the risk of fire or electric shock, do not use this appliance with any solid-state speed control device.

• WARNING! Turn off the unit and unplug it when it is not in use, before servicing, moving or cleaning it, before removing a filter and during a thunderstorm. When disconnecting, grip by the plug, do not pull by the cord.

• Switching on/off: Do not use the mains plug to start and stop the unit; always use the POWER button to start and stop the unit.

• WARNING: If the unit is knocked over during use, turn it off and unplug it from the mains power supply immediately. Visually inspect the unit to ensure there is no damage. If you suspect the unit has been damaged, do not use it. Switch it off, unplug it and contact a technician or our after sales support centre for assistance. Do not pick up or operate a damaged appliance, or after it malfunctions or has been dropped or damaged in any manner.

• Damaged cord: If the supply cord is damaged, do not use the appliance.
  A damaged power supply cord must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

• RCD: The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30 mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.

Usage conditions and restrictions

• Intended use: This appliance is intended for purifying indoor air in domestic environments. It is not suitable for commercial, industrial or trade use. Do not  se it for any other purpose, and only use it as described in this manual.

• Common sense: These instructions are not intended to cover every possible condition and situation. As with any electrical appliance, common sense and caution are therefore always recommended when installing, operating and maintaining the unit.

• Usage restriction: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance in a safe way and understand the  hazards involved.

• Children: Supervise children to ensure they do not play with the appliance.
  Close supervision is necessary when any appliance is used by or near children. Cleaning and user maintenance shall not be made by children without supervision.

• Unattended: Do not leave the appliance unattended when in use.

• Openings: Do not obstruct the air intake or outlet openings. Do not insert any objects, or your fingers into the air inlet or air outlet openings.

• Attachments: The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.

• Handle with care: Do not shake the appliance vigorously or drop it from an elevation. Doing so will damage the product or shorten its lifespan. Do not sit or stand on the appliance, which may lead to potential injury. Do not press hard on top of the unit or place heavy things on top of it.

• No outdoor use: Do not use the unit outdoors. It is for indoor use only.

• Location: Always place the appliance on a dry, stable, level and horizontal surface. Never place it on an inclined or uneven surface. Do not use the appliance in an environment where oil is used or smoke is generated, such as in a kitchen.

• Clearances: Ensure there is a clearance of at least 30 cm from walls and furniture and at least 50 cm from electrical appliances.

• Protect from heat: Do not use the appliance near appliances that get hot during use, such as heaters, ovens or fireplaces. Avoid long-term exposure to direct sunshine.

• No flammable gases: Never locate the air purifier in an area where flammable and combustible gases are present. If combustible gas accumulates around the unit, it may cause a fire.

• Moving the appliance: When moving the air purifier, always turn it off first and disconnect the power supply, and then move it slowly. Keep the unit upward during transport and storage.

• Misuse: We accept no responsibility for any eventual injury or damage caused by improper installation, misuse or noncompliance with the instructions.

Cleaning and maintenance

• Disconnect: Make sure the appliance is disconnected from the power supply when it will not be used for a long time and before cleaning or maintenance.
• Service: Except for the filter, the air purifier has no user-serviceable parts contained inside. Do not attempt to disassemble, modify or conduct repairs on this unit. It has been built in accordance with relevant safety and performance standards. An electrical specialist must carry out all repairs. If the appliance requires service, please contact our after sales support centre.
• Cleaning: Clean the outside of the unit once a month using a dry or slightly damp cloth (not wet!), or use a soft brush attachment of a vacuum cleaner.
  Never use water, wax, polish, or any other chemical solution to clean the outside of the unit.
  Never use water or any household cleaners or detergents to clean the 3-in-1 filtration system; use a dry, soft brush to clean the filters and replace them when necessary.

Product Overview

Scope of delivery

Air purifier

Front view (Fig. 1)

Rear view (Fig. 2)

1. Control panel
2. Air outlet
3. Front housing
4. Handle
5. Air inlet (do not obstruct)
6. Base

Documentation (not shown)
Instruction manual
Quick start guide
Warranty certificate

NOTE: Due to continued product improvement, images and illustrations in this  manual may vary slightly from the product purchased. All images in this manual are for reference purposes only. Parts are not necessarily pictured to scale.

Control panel

Fig.3

A POWER button: press to turn the unit on. The indicator (above) will illuminate (blue) when it is on. Press this button again to enter standby mode.
B TIMER button: press to select between a 1, 4 and 8 hour timer. The corresponding indicator will illuminate (blue). When the timer ends, the device will automatically switch off.
C ANION/ FILTER button (and separate indicator): press to turn the anion function on/off – the respective indicator light will illuminate (blue).
D SPEED / AUTO button

• Press to choose the fan speed options: night, low, mid, high – the respective indicator light will illuminate (blue).
• Upon being switched on, the appliance will enter automatic (Auto) mode, where the three speed level lights are illuminated.

NOTE: In Auto mode, the purifier automatically adjusts the purification level based on the sensor’s detection data (dust concentration).
E Filter indicator: the filter indicator will flash when it is time for you to clean or replace the filters. After you have replaced the filters, press and hold the ANION button for 5 seconds and the counter will reset from the beginning.
F PM2.5 indicator: the air quality indicator illuminates green when the air quality is good, orange when it is average and red when it is poor.

Before first use

• Unpacking: This product has been packaged to protect it against transportation damage. Unpack the appliance and keep the original packaging materials in a safe place. It will help prevent any damage if the product needs to be transported in the future, and you can use it to store the appliance when it is not in use. In the event that the packaging is to be disposed of, please recycle it where possible.
• Safe packaging disposal: Plastic wrapping can be a suffocation hazard for babies and young children, so ensure all packaging materials are kept out of their reach and disposed of safely.
• Inspection: Unwind the cord fully and inspect it for damage. Do not use the appliance if any part is damaged. In case of damage, contact our after sales support centre for advice.
• Documentation: Make sure you have read and understood all instructions and warnings in this manual. Refer the Product Overview to identify all parts of the appliance and familiarize yourself with its operating principles. Pay particular attention to the safety instructions on the previous pages.
• IMPORTANT! Before first use you will have to unpack the filtration system and install it into the appliance following the instructions on the next page.

Features

• Control panel with touch controls for easy operation
• Air quality indicator (green = good, orange = average, red = poor)
• 8 hour timer
• Sleep mode
• Filter replacement reminder
• Anion generator

The filtration system
To help you keep your home clean and free of indoor air pollutants and allergens, the STIRLING® Air Purifier is equipped with an effective 3-in-1 filtration system, which consists of a HEPA filter, a carbon filter and a prefilter.

• The H13 HEPA filter removes 99.7-99.98% of microfine airborne particles such as dust, pollen and smoke.
• An activated carbon filter is located behind the HEPA filter. It attracts and neutralizes harmful or undesirable fumes and odors from cleaning, cooking or new furniture.
• The pre filter, located behind the carbon filter, traps bigger breathable particles, such as pet hair and dander.

Filter installation

Before using the appliance, you will have to remove all packaging materials from the 3-in-1 filter set, which is fitted inside the appliance in its original wrapping. The filters fit into the appliance as shown in Fig. 4.

1. Remove the rear cover of the appliance by pulling the bottom handle (Fig. 4).
   

2. Take the filtration system out of the appliance and remove its plastic packaging (Fig. 5).
   
   

3. Reinstall the unpacked filtration system into the appliance with the small handle facing outward (Fig. 6).
   

4. Reinstall the rear cover as shown (Fig. 7). Make sure it clicks in securely.
   

Instructions

Location

• Place the appliance on a dry, stable, level and horizontal surface. Never place it on an inclined or uneven surface.

• For a better air purification effect, make sure to maintain a clearance of at least 30 cm from walls or furniture (Fig. 8) and at least 50 cm from electrical appliances.
  

• Do not use the appliance in the following environments:

  • where oil is used or smoke is generated, such as in a kitchen
  • near appliances that get hot during use, such as heaters, ovens or fireplaces
  • where it would be exposed to direct sunshine for long periods of time
  • where flammable and combustible gases are present.

Connecting the air purifier and switching on

• Plug the appliance into a properly earthed 220-240 V-, 50 Hz mains socket and switch on power to the outlet.
• Press the POWER button to turn on the unit.
• When the unit is running, press the POWER button to switch the machine to standby mode.

Using the air purifier

Fig.9

Power
Press the POWER button to turn the appliance on. The corresponding indicator will light up, accompanied by a beep sound. Press this button again to enter standby mode.

Fan speed
Press the SPEED / AUTO button to choose the fan speed options:
AUTO - > LOW-> MEDIUM -> HIGH -> NIGHT

This cycle will repeat as you continue to press this button. A beep will sound for each press. The respective indicator light will illuminate – when the low, medium and high indicators are all illuminated simultaneously, this indicates auto mode.

• In Auto mode the fan speed and the colour of the air quality indicator are determined by the real time air quality detected by the PM2.5 smart sensor.
• Night Mode – The fan will use the lowest fan speed for quiet operation, and all indicators will switch off. Tap any button to activate the display for five seconds, during which time you can change the operation of the unit.

Air quality status

When the appliance is switched on, the air quality sensors inside the appliance assess the air quality and, after a short while, display the colour that corresponds to the current ambient air quality.

The PM2.5 indicator illuminates:

• green when the air quality is good
• orange when the air quality is average
• red when the air quality is poor.

NOTE: PM2.5 refers to inhalable particles: particulate matter with a diameter of less than 2.5 micro metres (µm), which can only be detected with an electron microscope. (For reference, the average human hair is about 70 micro metres in diameter.)

Filter reminder
The air purifier has a filter indicator built in that automatically counts the usage time and reminds you when the filters need to be cleaned or replaced. Press the ANION/ FILTER button to turn it on/off. A beep will sound.
When you start the machine, the filter indicator begins counting the hours of usage. It will stop counting when the appliance is shut down or is in standby mode and resume counting when you switch it on again.
When the filter indicator has counted a total of 4500 hours, the filter indicator will start flashing to alert you to clean or replace the filters.

• Please refer to page 16 for instructions how to clean the filters, or to page 17 for how to purchase replacement filters.
• To clear the accumulated time after you have cleaned or replaced the filters, press and hold the ANION / FILTER button for five seconds and the timer will reset from the beginning.

Off-timer
Make sure the appliance is switched on before setting the timer.
Press the TIMER button to select the off-timer period: 1 hour, 4 hours, 8 hours the respective indicator light will illuminate and a beep will sound. The appliance will start timing and shut down automatically after the set period.
The fan speed can be changed on this mode without affecting the timer. The timer will restart if the time is changed.
To turn the timer off, press this button repeatedly until all indicators are off.

FAQs & Troubleshooting

If you experience problems with your air purifier, or it appears not to be operating correctly, check the information below for solutions to common problems. If you still cannot solve your problem, please contact our after sales support centre for advice. Do not attempt to repair the appliance yourself.

the appliance is properly connected to your power supply and your electrical outlet is working.
The electrical outlet is faulty — check whether the unit is working if connected to a different power outlet.
The appliance is not switched on — ensure you have pressed the POWER button to switch on the appliance.
The appliance makes a loud noise.| The air purifier is located on an inclined surface —place the unit on a level surface.
The filter is clogged — check all filters and clean or replace them as necessary.
The air inlet is blocked — check and ensure that the air inlet and outlets are free of obstructions.
Poor air purifying effect, especially with regard to odours.| The filters are installed incorrectly — refer to page 11 for correct filter installation instructions.
The filters may have reached the end of their lifespan — replace the filters.
An unpleasant odour is coming from the machine.| The filters needs to be changed — replace the filters according to the instructions.
There is a burnt smell and/or smoke coming from the

unit.

| The unit is faulty — switch off and unplug the unit, then contact our after sales support centre.
The filter parts are still in the original packaging — refer to page 11 for correct filter installation instructions.
The filter indicator does not turn off.| You may not have reset the counter — press and hold the ANION button for three seconds to reset the counter.
The unit got wet and now works abnormally.| The unit is damaged — switch off and unplug the unit, then contact our after sales support centre.

Other Useful Information

Electric shock hazard!

Before cleaning and servicing, ensure the unit is switched off and disconnected from the power outlet to prevent possible injury.

Cleaning the exterior parts of the appliance
When required, clean the outside of the unit using a clean and soft, dry or slightly damp cloth (not wet!). Use a dry cloth or a vacuum cleaner soft brush attachment for cleaning the air outlet and intake.
CAUTION! Never use water, wax, polish, or any other chemical cleaning agent, to clean the outside of the unit.

Filter maintenance

The 3-in-1 filtration system must be cleaned and/or replaced regularly, as appropriate, in order to ensure efficient operation and maintain the unit in good  working order. When the filter indicator flashes, it is time to clean or replace the filters.

1. Remove the back cover (following the instructions on page 11 ).

2. Take the 3-in-1 filtration system out of the appliance and clean/replace it as appropriate.

3. Use a soft, dry brush to remove dust and debris from the filters.
   IMPORTANT! Never use water or any household cleaners to clean the HEPA and carbon filters.

4. When the filters are worn or damaged, or when the air purification effect remains poor after cleaning the filters, it is time to replace them. Spare filter sets are available for purchase from our after sales support centre.

5. After you have replaced the filters into the appliance, reattach the back cover and reset the counter.

IMPORTANT!
After cleaning or replacing the filters, remember to press and hold the ION button for five seconds to reset the counter.
A beep will sound to indicate that it has been successfully reset..

Storage
If the appliance is not going to be used for an extended period of time, please store the unplugged appliance safely in the original packaging in a dry location, out of reach of children. Do not place any heavy items on top of appliance during storage as this may result in damage of appliance.

Service, repair and spare parts
If you look after your air purifier it should give you years of good service.
Should you experience problems with the appliance which you cannot solve yourself using the advice given in this manual, please contact our after sales support centre for advice. Do not attempt to open the appliance.
Our after sales support centre stocks spare filter sets for the air purifier.
To purchase a filter set, contact our after sales support centre at tempo.erg/support or on 1300 112 534.

Technical specifications

Warranty

The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Compliance

This appliance has been fully tested and meets all requirements as set out by standards AS/NZS 60335.1 and AS/NZS 60335.2.65.

CLASS II – DOUBLE INSULATED APPLIANCE
 This symbol indicates that the appliance has been designed in such a way that it does not require a safety connection to electrical earth (ground).

 The RCM Mark (Regulatory Compliance Mark) indicates that the product complies with the relevant guidelines of the ACMA as well as corresponding government requirements for the safety of electrical devices.

Responsible disposal

 Packaging materials are recyclable. Please dispose of them responsibly for recycling.

 At the end of its working life, do not throw this appliance out with your household waste. Electrical and electronic products contain substances that can have a detrimental effect on the environment and human health if disposed of inappropriately.  Observe any local regulations regarding the disposal of electrical consumer goods and dispose of it appropriately for recycling.

Contact your local authorities for advice on recycling facilities in your area. Or find recycling scheme services listed on Planet Ark’s website at www.recyclingnearyou.com.au, or call Planet
Ark on 1300 733 712.

Repair and Refurbished Goods or Parts Notice

Unfortunately, from time to time, faulty products are manufactured which need to be returned to the supplier for repair.
Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost. We recommend you save this data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used where they meet ALDl’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on 1300 112 534 or write to us at:
Tempo (Aust) Pty Ltd (ABN 70 106 100 252)
PO BOX 132, Frenchs Forest NSW 1640, Australia
Web Support: tempo.org/support
Tempo Help Desk: 1300 112 534 (Aust)
(Operating Hours: Mon-Sat 09:00 am to 06:00 pm AEST)

Warranty returns
Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product.

Product does not work?
If you encounter problems with this product, or if it fails to perform to your expectations, make sure to contact our After Sales Support Centre on 1300 112 534.

For an electronic copy of this manual, go to www.stirlingappliances.com.au and download a copy, or contact our after sales support centre.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>