STIRLING STR-H200W Chest Freezer User Guide
- June 3, 2024
- STIRLING
Table of Contents
STR-H200W Chest Freezer
User Guide
Quick Start Guide
Model: STR-H200W
Let’s get your new
198 L chest freezer ready to use!
Installation
CAUTION! The freezer is heavy – transport it with care! To avoid back or
another injury, we recommend you ask someone for help or use a mechanical aid
when moving it.
Getting it ready for use
Before you start installing the freezer, wipe the interior surfaces and
accessories with a damp cloth to remove any dust from transit and storage. Dry
thoroughly.
Installation
Tilt the freezer carefully not more than 45 degrees and move it to its
designated place. Use the roll wheels under the back corners to help you
position it in place and the leveling feet at the front for adjustment, if
necessary. Avoid areas where the freezer would be exposed to direct sunlight,
heat, extreme cold ambient temperatures or excessive moisture and high
humidity. Installing it in the coolest area of the room will save energy
consumption and running costs. Allow at least 10 cm of clear space at the back
and sides of the unit, and 70 cm above, so air can circulate freely around the
freezer.
For comprehensive installation instructions, please consult the manual.
Connection
Settling
Before plugging in your new freezer, let it stand upright for at least 4 hours
to allow the refrigerant gases to settle into the compressor.
Connection
Plug in the freezer and secure the power cord behind the unit, making sure the
plug is accessible after installation.
First use
The first time you turn the unit on, select the appropriate mode (see
overleaf) and set the temperature control to the coldest temperature in the
range. Then, after 24 hours, adjust the temperature to your needs.
Turn over the page for a description of the modes …
Using the chest freezer
This appliance can be used as a chest freezer, or as a refrigerated storage
cabinet for unfrozen food.
For convenient access and organized storage, the cabinet is equipped with a
wire basket.
The control panel is located at the front of the storage cabinet, in the
bottom right-hand corner. Use it to select your desired cooling mode, adjust
the temperature in the cabinet and unlock the control panel. (The system will
be locked automatically 30 seconds after the last button operation.)
Digital control
Press the FRIDGE button to use the cabinet in “Fridge” mode and adjust the
temperature in the storage cabinet between 2 °C and 6 °C.
In “Fridge” mode, the appliance is suitable for short-term storage of fresh
food. The temperature range in this mode is low enough to limit some bacterial
growth, but it is not suitable for long-term storage of perishable foods.
Press the FREEZER button to use the cabinet as in “Freezer” mode and adjust
the temperature in the storage cabinet between -14 °C and -25 °C. In “Freezer”
mode, the appliance is suitable for freezing fresh food and long-term storage
(up to three months) of frozen food.
Press and hold the FRIDGE and FREEZER buttons for three seconds at the same
time to unlock the control panel. You can now select a mode or adjust the
temperature.
Press the SUPER button to use the cabinet temporarily in “Super Freezing”
mode. This 11 is recommended for fast freezing, for example, when you have
added a large quantity
of fresh food to the freezer cabinet. Unless canceled earlier, “Super
Freezing” mode will automatically revert to the previously set freezer
temperature after 52 hours.
Give us a call
What? Do you mean this Quick Start Guide didn’t have ALL the answers?
The manual has more comprehensive instructions, or speak to us. Call ours
After Sales Support on 1300 112 534.
Well done, you made it!
Now sit back and relax … your new
198 L chest freezer is automatically covered by a 3-year in-home warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>