Kruger Matz KMPG3 Wireless Earphones Owner’s Manual
- June 3, 2024
- Kruger Matz
Table of Contents
Kruger Matz KMPG3 Wireless Earphones
SAFETY INSTRUCTION
- Before connecting the earphones to the device, turn the volume down to avoid damaging ears. Keep the volume at a reasonable level throughout entire time of using the earphones. To prevent damage to your hearing, do not raise the volume too high.
- Do not use the earphones in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, construction sites or on roads where vehicles and bicycles are traveling). Never use the earphones while driving a car, riding a motorcycle or bicycle or operating any other vehicle, as it may cause potential risk to your safety.
- Wireless devices can cause interference in aircraft. Please make sure that your earphones are powered off in flight.
- Use of this device near medical apparatuses may cause interference in their operation.
- Follow basic safety rules when operating the device.
- If you experience tinnitus, discomfort or other concerning behaviors, stop using the device immediately.
- Protect the earphones from shock and being dropped.
- Keep the device out of the reach of children.
- Protect this device from water, humidity and other liquids. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and other sources of heat.
- Do not use this device if it has been damaged.
- Use only authorized accessories.
- Do not use fast charger to charge the case.
- Do not attempt to repair this device yourself. In case of damage, contact authorized service point for check-up or repair.
- Before cleaning, turn off the device.
- Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.
OPERATION
- To turn on the earphones, take them out of the charging case, or tap and hold the touchpanel for 5 seconds.
- To turn off the earphones, put them into the charging case, or tap and hold the touchpanel for 5 seconds.
- If the earphones battery level is low, the warning sound will be played every 40 seconds.
- Battery level of the charging case is indicated by the light bar.
- After opening the case, the light bar will change color to blue. To check the case battery level, close the case.
CHARGING
- Place both earphones into the charging case. Make sure, that the earphones are positioned correctly: “L” on the left, “R” on the right. Both earphones have a magnet that will align the earphones with the pins.
- While charging, the LED indicator on the earphones will lit up. After finished charging, the LED indicators will turn off.
CHARGING THE CASE
- Connect the USB type C cable to the charging port of the case. Connect the USB plug to the compatible USB port on a computer or a power adapter.
- During charging, the case charging indicator will change color:
- Red: battery level is 25% or less.
- Blue: battery level 26%-75%.
- Green: 76%-99%.
- After finished charging, the light bar will turn off.
PAIRING
- Take out both earphones from the case. The earphones will connect with each other automatically.
- The LED indicator on the left earphone will flash, indicating entering pairing mode.
- Turn on the Bluetooth function on the external device and search for new Bluetooth devices.
- Select KM G3 and connect the external device with the earphones.
- After successful pairing, the LED indicator will stop flashing, and the audio cue will be played.
Note:
- The earphones will turn off after 3 minutes of idle.
- The distance between earphones can’t exceed 2 meters.
MONO MODE
-
You can use just one of the earphones. After pairing the earphones with the external device, place one of the earphones
in the case, or turn it off. The second earphone will stay connected to the external device. -
The earphones connect automatically after turning on. If not, place both earphones in the charging case and touch and hold the touchpanel on both earphones for about 10 seconds. After turning them on, they will connect with each other.
TOUCHPANEL FUNCTIONS
- Tap once to play or pause the music.
- While playing, touch and hold the touchpanel of the right earphone, to fast forward to the next track.
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or its literature,
indicates that it should not be disposed with other household wastes at the
end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types
of wastes and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal. Made in China for LECHPOL ELECTRONICS
Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.
- Touchpanel
- LED indicator
- Charging case
- Battery case indicator
- USB type C port
