LIPOWER APOLLE 100 Portable Solar Panel User Manual
- June 3, 2024
- LIPOWER
Table of Contents
APOLLE 100 Portable Solar Panel
User Manual MODEL: APOLLE 100
OUTPUT: 100W/18V
SPECIFICATIONS
Model | APOLLE 100 |
---|---|
Solar Cell Type | Monocrystalline |
Peak Power | 100W |
Conversion Efficiency | 23% |
Maximum Working Voltage (Vmp) | 18V |
Maximum Working Current (Imp) | 5.55A |
Open-Circuit Voltage (Voc) | 24V |
Short-Circuit Current (Isc) | 6.5A |
USB-A Output | 5V/3A |
USB QC3.0 Output | 5V/3A, 9V/2A, 12V11.5A |
USB-C Output | PD45W, 5V/3A, 9V12A 12V/1.5A, 15V/3A |
Dimensions (Folded) | 20.47 x 14.37 x 1.97 inch 520x 365x 50mm |
Dimensions (Unfolded) | 57.00 x 20.47 x 0.59 inch 1448 x520x 15 mm |
Net Weight | 10.58Ib / 4.8kg |
WHAT YOU CA N GET
- 1 x DC to Anderson Cable
- 1 x User Manual
- 1 x 100W/18V Solar Panel
- 1 x DC to DC Cable
SAFETY TIPS
- Do NOT bend the Solar Panel (the angle is more than30°) or the panel will be broken.
- Do NOT immerse the Solar Panel in water.
- Do NOT clean the Solar Panel with water, with the wet cloth gently scrub it.
- Do NOT use or store the Solar Panel near sources of heat such as a fire or heater.
- Do NOT put the Solar Panel into a fire or apply direct heat to it.
- Do NOT pierce the Solar Panel casing with a nail or other sharp object, break it open with a hammer, or step on it.
- Do NOT attempt to disassemble the Solar Panel in any way.
- This Solar Panel can NOT contact with strong corrosive objects.
- Do NOT charge automotive battery directly.
FAQS
Ql: How to clean the solar surface?****
– Al: Dust and dirt on the surface should first be removed using a soft brush. Use a damp cloth to wipe the surface of the solar module to remove any remaining dust or dirt. Any guano or other adhesive should be removed as soon as possible from the solar surface to avoid a reduction in performance.
Q2: What is the best charging angle?****
– A2: The solar panel has the best charging efficiency at a 90-degree angle to
the sunlight.
– 03: What should I do if my foldable Solar Panel cannot charge my device?
– A3:
– 1) The cloudy weather and unstable sunlight may cause current fluctuations
and hinder charging. Please place LIPOWER 100W Solar Panel in direct sunlight
or wait for the weather to clear.
– 2) Check the device to make sure whether the device supports solar panel
charging.
– 3) Whether the output voltage of the solar panel meets the input voltage
range of the device to be charged.
WARRANTY
LIPOWER warrants this product will be from detects in workmanship and material under normal consumer use from the date of purchase. This product is covered by a limited 24-month warranty period. The warranty does NOT apply to the product that is misused, abused, modifier, damaged by accident, or used for anything other than normal consumer use as authorized in LIPOWER’s current product literature.
CUSTOMER SUPPORT
For any inquiries or comments concerning our products, please send an email to
supportelipowershop.com. Our customer service will address your issue within
24 hours.
MADE IN CHINA