ZEALOT S-67 Bluetooth Speakers User Manual

ZEALOT S-67 Bluetooth Speakers

Quick Start

• Power button
• Mode button
• Stereo
• EQ Equalizer
• Short press 1s: Volume – Long press 3s: Previous song
• +Short press 1s: Volume + Long press 3s: Next song
• Play/Pause

Turn On/Turn Off

Function introduction
Bluetooth

Bluetooth connection

1. Power on the speaker and after the blue indicators flashing with the voice prompt “BLUETOOTH the speaker has entered the pairing mode.waiting for connection.
2. Select the “ZEALOT-S67” in your Bluetooth device (cell phone) for connection and click on connect. When hear the two prompt sounds and the blue indicator is steady on, the speakers and the device have been successfully connected.

Notices:

1. When it shows the below pictures, please ignore the ZEALOT-S67 on your iphone’s Bluetooth devices list, and restart Bluetooth connection.
2. When you use iphone to reconnect, begin with ZEALOT-S67 powered off, please turn on luetooth on your phone before starting up ZEALOT-S67,1 meet the first problem.

Reconnection?

1. Restart the speaker, it will automatically connect the paired cell phone or other Bluetooth devices;
2. Ifthe connection fails, please enter the Bluetooth settings to ensure the bluetooth on your phone has been turned on;
3. With 1OS device, the Bluetooth should be turned on in advance for the speaker to automatic connect. If not, you need to manual select the  “ZEALOT-S67”

TWS Connect
When both machines are turned on and the distance is with 10m, click on the button of any machine to connect each other. After the fist connection is successful and the subsequent connection will be automatic.

Bluetooth Call

Bluetooth Play
Open the music player to play music in the Bluetooth state.

Data transmission and USB audio function
USB data cable connect with computer can be used for power charging when the speaker in power off state. Connect with the computer in power on state, after the USB used for data transmission, you need to power on the speaker and insert the TF card, after the mobile USB and hard disk identified by the computer, you can start to copy.

Equalizer function

USB Mode
Insert the U disk and hear the prompt tone “USB” to play the songs in the disk.

TF Card Mode
Insert the TF card and hear the prompt tone “TF Card” to play the songs in the TF card.

AUX Mode
Connect with audio cable, it will switch to aux mode after hearing the warning tone “AUX”.

Charging

1. When the battery voltage is insufficient, there is a voice prompt “Low battery please charge”, reminding users to charge it. (Support view the power state of this bluetooth speaker on your phone while connecting via Bluetooth.)
2. Plug micro USB-C charge cables into the speaker’s nd another end to adapter or computer USB port for charging. Red indicator is on when charging and goes out after fully charged.
3. Charging time vary from the different adapters and computer USB charging ports.

Specification

• Input Voltage:DC5v
• Transmission range:10m
• SNR:>95dB
• Working Voltage:7.4V
• Dimension:297133130mmm
• Driver:42
• Frequency response:80Hz-20KHz
• Distortion: <1%
• Weight:1956g

Notice

1. Please check if the model of the charger is suitable for this product before charging.
2. Do not submerge in water.
3. Avoid extreme temperatures.
4. Any improper disassemble or modify without professional skills will cause unknown damage even explosion. It’s not covered by our warranty.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>