ZEALOT S1 Portable Wireless Speaker Quick Start Guide
- June 15, 2024
- ZEALOT
Table of Contents
ZEALOT S1 Portable Wireless Speaker
Part name
- Speaker cover
- Mode button
- Volume+/Next
- Volume-/previous
- Silicon case
- TF slot
- Charge port
- 5V/1A output
- AUX
- Power button
- Flashlight power button
- Lampshade
- Speaker nets
- PVC transmittance sheet
- Skid particles
- Membrane pores
Product Specifications
- Output voltage: 5v / 1A
- Transmission distance: 10m
- Frequency response: 20Hz-20KHz
- Dimensions: 156×51×51mm
- Operating voltage: 3.7V
- Weight: 260g
- Speaker: 40
- Output power: 3w
- SNR: ≥90dB
- Distortion: 1%
- LED lamp power: 1W
Warm prompt
Keep using your mobile phone
- Bluetooth works between your phone and speaker, which is a straight line without a blocking range of about 10 meters, beyond this distance it may appear to decline in sound quality and lost connection.
How to reconnect
- Your speaker will attempt to reconnect the lost link.
- If the speaker does not attempt to relink, please manually reconnect by the phone’s Bluetooth device menu.
Startup and shutdown
-
Startup:
Push the power button to “ON”, -
Startdown:
Push the power button to “OFF”,
Charging
- When the power of a product is insufficient, there is a warming tone to remind you to charge it.
- Insert USB cables into the adapter or computer USB port and body, then the red indicator will light; When fully charged, the red indicator will go out.
- The charging time will be different for the different adapters and computer USB charging ports, reminding users to charge the product.
| Power | Fully | Low power |
|---|---|---|
| Voice prompt | – | Low power |
| LED indicator | The indicator will go out | The red indicator will light |
Function introduction
Product mode switching sequence: Bluetooth→ TF card→ FM Radio → Audio Plug(TF and AUX mode defaults into priority, pull out TF card or audio cable, and it will auto-shift to FM radio mode.
-
Bluetooth mode Push the switch to “ON”, and you will hear a beep “Bluetooth mode, Bluetooth is ready for connection, and blue LED lights flash. Then double-click the “M” key. There will be a “ding-dong” beep after voie model shife successfully. Search for Bluetooth devices “S1” and click on the link,you can play music from the phone; Underbluetooth mode, if an incoming call, short-press the “M” button to answer a call, long-press the “M” key to reject, double-click “M” key to call back the last outgoing calls. Short press – , + to adjust previous and next; long press to adjust the volume; short press the “M” key to pause/play; long press the “M” key for mode switching.
-
TF card mode
Insert TF, you will hear the beep “TF card mode (music player mode)”, play music from the TF card, Short press – , + do the previous and next shift. Long press – , + , To adjust the volume; short press the “M” key to pause/play; long press the “M” key for mode switching. -
Radio mode
Long press the “M” key to switch to radio mode, and you will hear a beep, “the radio mode”, short press “M” for automatic station searching, after searching is finished, the radio will play the first station searched. Short press – , + to do previous and next shift. Long press – , + to adjust the volume; Short press the “M” key to pause/ play; Long press the “M” key for mode switching. Insert charge line may receive better radio effect. -
AUX (audio) mode
Insert an audio cable, you will hear the beep “LINE INmode (AUX input mode)” to switch to AUX mode. -
Mobile power bank
Input: Must use 1A or above 1A current to charge, the indicator light is red when charging; The blue light will flash when it is charged above 75%, charging is completed when the red and blue lights keep being on.
Output: When the phone needs to be charged, can be inserted into the USB port to charge. -
Lighting
When to open the flashlight, The first time to press” “is to open the bright light, the second time is to open the general light, the third time is to be quick flash-light mode, and the fourth time to short press is to close the flashlight. -
Data transmission
Use a USB cable to transmit data, when connected to a computer, the product can be charged, When transmitting the data, the product should be on and insert a TF card to copy the data. -
Low power remind
During use, if the power is low, there will be low voice prompts “Low power please charge (Low battery)”
Product characteristics
- Standby time: >30 days
- Waterproof
- Dropproof
Note
- Do not throw this product into water or fire.
- Do not modify, repair, or dismantle the equipment.
- Do not make contact with combustible materials directly.
- Please keep the device away from damp and dusty environments.
- Before charging please check whether the charger model is suitable for this product.
- Do not use the Bluetooth function when changing.
- Do not use the product when charging, it is recommended to charge the speaker every month. Any changes or modifications without the express consent could cause the user to lose the operating rights of device. Replace the battery improperly may be an explosion hazard
PRECAUTIONS
Extremely loud music can drown out the sound of traffic or other danger signals. Make sure you can always hear what is going on around you.
FREQUENTLY ASKED QUESTIONS
What is the brand and model of the portable wireless speaker described in the provided information?
The brand is ZEALOT, and the model is S1.
What materials are used in the construction of the ZEALOT S1 Portable Wireless Speaker?
The materials used are Silicone and Polycarbonate.
What is the power source of the ZEALOT S1 Portable Wireless Speaker?
The power source is battery-powered.
What is the water resistance level and mounting type of the ZEALOT S1 Portable Wireless Speaker?
The water resistance level is IPX5, and the mounting type is freestanding.
What are the dimensions and weight of the ZEALOT S1 Portable Wireless Speaker?
The dimensions are 6.14 x 2.01 x 2.01 inches, and the weight is 10.6 ounces.
How many batteries are required for the ZEALOT S1, and what type of batteries are recommended?
It requires 2 Lithium-Ion batteries, which are included.
What wireless communication technology does the ZEALOT S1 Portable Wireless Speaker use?
It uses Bluetooth technology.
What connectivity technologies are supported by the ZEALOT S1 Portable Wireless Speaker?
Bluetooth is the supported connectivity technology.
Are there any other display features on the ZEALOT S1 Portable Wireless Speaker, and if so, what are they?
The other display feature is Wireless.
What human interface inputs are available on the ZEALOT S1 Portable Wireless Speaker?
The human interface inputs include a microphone and buttons.
Does the ZEALOT S1 Portable Wireless Speaker have an audio jack, and if so, what is its size?
Yes, it has a 3.5mm audio jack.
What is the phone talk time provided by the ZEALOT S1 Portable Wireless Speaker?
The phone talk time is 8 hours.
What is the phone standby time (with data) of the ZEALOT S1 Portable Wireless Speaker?
The phone standby time is 300 hours.
What features does the ZEALOT S1 Portable Wireless Speaker offer for cycling enthusiasts?
It is designed for cycling bike handlebars/backpacks and includes LED torch light, multiple play ways, and a microphone for hands-free calling.
How does the ZEALOT S1 Portable Wireless Speaker combine music and light features?
It has a 40mm driver and passive subwoofer for music, and an LED torch light for illumination.
VIDEO – PRODUCT OVERVIEW
DOWNLOAD THE PDF LINK:ZEALOT S1 Portable Wireless Speaker Quick Start Guide
REFERENCES
ZEALOT S1 Portable Wireless Speaker Quick Start Guide- Device.Report
ZEALOT S1 Portable Wireless Speaker Quick Start Guide- fccid.io
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>