ZEALOT S78 Wireless Speaker User Guide

July 31, 2024
ZEALOT

ZEALOT S78 Wireless Speaker

Specifications:

  • Wireless version: V5.2
  • Charging voltage: DC 5V
  • Working voltage: 7.4V
  • Transmission distance: 10m
  • Frequency range: 20Hz-20KHz
  • Speaker: 120mm2 + 42mm2
  • Signal-to-Noise Ratio (SNR): 90dB
  • Distortion: 1%
  • Weight: 4.4kg
  • Size: 410167185mm

Product Usage Instructions

Battery Status:

  • Green light: 80%-100% battery
  • Yellow light: 40%-70% battery
  • Red light: Below 30% battery

Wireless Connection:

  1. Turn on the speaker and connect it to your device.
  2. Click the dual pairing button.
  3. Repeat steps for additional speakers.
  4. A prompt tone will indicate successful connection of both speakers.

Equalizer Settings:

  • Bass: Green light is on
  • Treble: Orange light is on
  • Normal: No specific light indication

AUX and TF Card Usage:

The speaker supports AUX input and TF card playback at 5V.

FAQ

  • Q:How do I know when the battery is fully charged?q
    • A: The green light will be on when the battery is between 80%-100%.
  • Q: How can I connect multiple speakers for dual pairing?
    • A: Turn on each speaker, click the dual pairing button on each, and wait for the prompt tone indicating successful connection.
  • Q: What should I do if the speaker is not connecting\ wirelessly?
    • A: Make sure the wireless version is compatible, check the transmission distance, and ensure the devices are within range.

PACKING CONTENT

POWER ON

WIRELESS CONNECTION

MODE SWITCH

PLAY

LIGHET

EQUALIZER

PARTYADD

  1. Turn on a speaker, connect it to your device, and click the dual pairina button.
  2.  Turn on another speaker, click the dual pairing button, there will be a prompt tone, indicating that both speakers have connected successfully.

CHARGE

WARNING

  • To ensure correct use and trouble-free operation, please read this user manual carefully first.
  • For the first use, it is recommended to fully charge it.
  • Please use and store the product at room temperature.
  • Do not expose the product to fire, high temperature, direct sunlight, etc.
  • Please keep the speaker volume moderate to avoid temporary or permanent hearing impairment.
  • Do not use organic solvents or other chemicals to clean the product.
  • Do not let small particles enter the product.
  • Do not disassemble the product or make any modifications to the product structure or any part thereof. olf the battery is not replaced correctly, there will be an explosion accident, only the same battery type can be replaced.
  • The battery (battery pack) must not be exposed to such sunlight, fire or similar overheating conditions.
  • Do not throw and drop the product to avoid damage.

Technical Specification

  • Wireless version V5.2
  • Charging voltage: DC 5V
  • Working voltage: 7.4V
  • Transmission distance: 10m
  • Frequency range: 20Hz-20KHz
  • Speaker: Φ120mm2+Φ42mm2
  • SNR:≥90dB
  • Distortion: 1%
  • Weight: 4.4kg
  • Size: 410167185mm

FCC Statement

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.

FCC ID: 2AFKR-S78

If consumers use a power adapter to charge, they should purchase a matching set of CCC certifications and meet the standards Required power adapter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals