ZEALOT-B38 Wireless Headphone User Manual

ZEALOT-B38 Wireless Headphone

Product Information

Specifications:

• Weight: 80g
• Dimensions: 75mm x 75mm
• Model: ZEALOT-B38
• Type: Wireless Headphone

Product Usage Instructions:

Packing Content:

• ZEALOT-B38 Wireless Headphone
• Micro-USB cable

Power On:

1. Locate the power button on the ZEALOT-B38 Wireless Headphone.
2. Press and hold the power button to turn on the device.

Wireless Connection:

1. Make sure the ZEALOT-B38 Wireless Headphone is turned on.
2. On your device, navigate to the Bluetooth settings.
3. Select “ZEALOT-B38” from the list of available devices.
4. The headphone will be connected and ready to use.

FAQ

• How do I charge the ZEALOT-B38 Wireless Headphone?
  Connect one end of the provided USB cable to the headphone and the other end to a USB power source. The headphone will start charging.

• How long does the battery last?
  The battery life of the ZEALOT-B38 Wireless Headphone depends on usage. On average, it can last up to 8 hours on a full charge.

• Can I use the headphone while it’s charging?
  Yes, you can use the ZEALOT-B38 Wireless Headphone while it is charging. However, it is recommended to charge it fully for optimal battery performance.

PACKING CONTENT

POWER ON

WIRELESS CONNECTION

PLAY

Technical Specification

• Charging voltage :DC 5V
• Working voltage :3.7V
• Transmission distance :10m
• Frequency range : 20Hz-20KHz
• Speaker: φ40mm
• SNR: ≥90dB
• Distortion: 1%
• Weight: 208g
• Size: 16818982mm

CHARGE

WARNING

• To ensure correct use and trouble-free operation, please read this user manual carefully first.
• For the first use, it is recommended to fully charge it.
• Please use and store the product at room temperature.
• Do not expose the product to fire, high temperature, direct sunlight, etc.
• Please keep the speaker volume moderate to avoid temporary or permanent hearing impairment.
• Do not use organic solvents or other chemicals to clean the product.
• Do not let small particles enter the product.
• Do not disassemble the product or make any modifications to the product structure or any part thereof.
• If the battery is not replaced correctly, there will be an explosion accident, only the same battery type can be replaced.
• The battery (battery pack) must not be exposed to such sunlight, fire or similar overheating conditions.
• Do not throw and drop the product to avoid damage.

FCC NOTE

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• * Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>