avenli SPA5 49 Inch 3 Person Inflatable Round Hot Tub Spa User Manual

Instruction Video

SPA5

User Manual

The product user guide contains product features, how to use, and the operating procedure. Read the user manual carefully to get the best experience and avoid unnecessary damage. Keep this manual for future reference. If you have any questions or comments about the device, please contact the customer line.

✉               www.alza.co.uk/kontakt
✆               +44 (0)203 514 4411
Importer        Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Warning

Carefully read, understand, and follow all information in this user manual before installing and using the swimming pool.
These warnings, instructions, and safety guidelines address some common risks of water recreation, but they cannot cover all risks and dangers in all cases. Always use caution, common sense, and good judgment when enjoying any water activity. Please read carefully and keep for future reference.

Non Swimmers safety

• Continuous, active, and vigilant supervision of weak swimmers and non-swimmers by a competent adult is required at all times
  (remember that children under five are at the highest risk of drowning)

• Designate a competent adult to supervise the pool each time it is being used;

• Weak swimmers or non-swimmers should wear personal protection equipment when using the pool;

• When the pool is not in use, or unsupervised, remove all toys from the swimming pool and its surrounding to avoid attracting children to the pool.

Safety devices

• It is recommended to install a barrier (and secure all doors and windows, where applicable) to prevent unauthorized access to the swimming pool;
• Barriers, pool covers, pool alarms, or similar safety devices are helpful aids, but they are not substitutes for continuous and competent adult supervision.

Safety equipment

• It is recommended to keep rescue equipment (e.g. a ring buoy) by the pool;
• Keep a working phone and a list of emergency phone numbers near the pool.

Safe use of the pool

• Encourage all users especially children to learn how to swim;
• Learn Basic Life Support (Cardiopulmonary Resuscitation – CPR) and refresh this knowledge regularly.
• This can make a life-saving difference in the event of an emergency;
• Instruct all pool users, including children, what to do in case of an emergency;
• Never dive into any shallow body of water. This can lead to serious injury or death;
• Do not use the swimming pool when using alcohol or medication that may impair your ability to safely use the pool;
• When pool covers are used, remove them completely from the water surface before entering the pool;
• Protect pool occupants from water related illnesses by keeping the pool water treated and practicing good hygiene.Consult the water treatment guidelines in the user’s manual;
• Store chemicals (e.g. water treatment, cleaning or disinfection products) out of the reach of children.
• Use the signage as outlined below;
• Removable ladders shall be placed on horizontal surface.

WARNING: drained pool outdoors may cause unknown hazards.

WARNING: Installation and assembly shall be done by adults.

WARNING: Read and follow the the instruction for use and maintenance to ensure a safe use of the swimming pool kit. Not following the instructions for use and maintenance can cause serious health hazards, in particular for children.

WARNING: Only for domestic outdoor use.

WARNING: Drowning hazard. Children can drown in very small amounts of water.

WARNING: Empty the pool when not in use. Do not leave a small pool empty outdoor.

  WARNING: Keep children under supervision in the aquatic environment.

  WARNING: No diving.

READ ALL INSTRUCTIONS AND SAFETY WARNINGS IN THIS MANUAL

Failure to follow the warnings and instructions in this manual may result in serious injury, drowning or electric shock.

The safety of your children is left on your hand! The risk is the highest for children aged below 5. Be high alert all the time.

Always comply with the following instructions:

• The children should be under close and constant supervision;
• Designate one security responsible;
• Always designate a responsible person to mange pool and pool area;
• Adult supervision should always be relevant to the number of people using the pool;
• Wet the nape, chest and legs before entering the water;
• Learn the safety gestures and especially the specifics to children;
• Prohibit diving and jumping;
• Prohibit running, splashing games around the pool;
• Do not let an unattended child who does not swim use the pool with no life-jackets on;
• Do not leave any players around and in the basin unattended;
• Always keep the water treatment products out of reach of all children.

If incident occurs remove the injured person or child from the pool and pool area

Contact emergency services for advice and guidance on how to treat injured person or child

Important safety instructions

For your own safety and that of your product, make sure to following the safety precautions below. Failure to follow the instruction may result in serious injury, property damage or death. Improper installation or operation will void the warranty.

Read, understand and follow all instructions:

DANGER

• Risk of accidental drowning:
  – Extreme caution must be exercised to prevent unauthorized access by children.
  – Inspect the spa cover regularly for leak, premature wear and tear, damage or signs of deterioration. Never use a worn or damaged cover: it will not provide the level of protection required to prevent unsupervised access to the spa by a child.
  – Always lock the spa cover after each use.

• Risk of injury:
  – The suction fittings in this spa are sized to match the specific water flow created by the pump.
  – Never operate the spa if the suction fittings are broken or missing. Never replace a suction fitting with an incompatible one.
  – If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• Risk of Electric Shock:
  – Do not permit any electrical appliances, such as a light, telephone, radio or television within 1.5m (5 feet) of a spa tub.
  – Do not use the spa when it is raining, thundering or lightning.

WARNING

• To reduce the risk of electric shock, do not use an extension cord, timers, plug adapters or converter plugs to connect the unit to electric supply; provide a properly located outlet.
• The spa electrical appliance should be supplied through a residual current device (RCD) having a rated residual operating current not exceeding 10mA.
• Parts containing live parts, except parts supplied with safety extra-low voltage not exceeding 12V, must be inaccessible to occupants in the spa.
• Parts incorporating electrical components, except remote control devices, must be located or fixed so that they cannot fall into the spa.
• Residential electrical connection box must be located safely with a distance of at least 2m away from the spa.
• Electric installation should fulfill the local requirement or standards.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• To reduce the risk or injury, do not permit children use this product unless they are closely supervised all times.
• To reduce the risk of child drowning, supervise children all times. Attach and lock spa cover after each use.
• Make sure the floor is capable of supporting the expected load (≥ 500kg/m²).
• Adequate draining system must be provided around the spa to deal with overflow water.
• To avoid damage do not leave the appliance empty for an extended period.
• To avoid damage to the pump, the spa must never be operated unless the spa is filled with water.
• Immediately leave spa if uncomfortable or sleepy.
• To reduce the risk of injury:
  • Lower water temperatures are recommended for young children and when spa use exceeds 10 minutes. To avoid the possibility of hyperthermia (heat stress) occurring it is recommended that the average temperature of spa-pool water should not exceed 40°C (104°F).
  • Since excessive water temperatures have a high potential for causing fetal damage during the early months of pregnancy, pregnant or possibly pregnant women should limit spa water temperatures to 38°C (100°F).
  • Before entering a spa or hot tub the user should measure the water temperature with an accurate thermometer since the tolerance of water temperature regulating devices varies.
  • The use of alcohol, drugs or medication before or during spa use may lead to unconsciousness with the possibility or drowning.
  • The use of alcohol, drugs, or medication can greatly increase the risk of fatal hyperthermia in spas. The causes and symptoms of hyperthermia may be described as follows: Hyperthermia occurs when the internal temperature of body reaches a level several degrees above the normal body temperature 37°C (98.6°F). The symptoms of hyperthermia include an increase in the internal temperature of body, dizziness, lethargy, drowsiness, and fainting. The effect of hyperthermia include failure to perceive heat; failure to recognize the need to exit spa; unawareness of impending hazard; fatal damage in pregnant women; physical inability to exit the spa; and unconsciousness resulting in the danger of drowning.
  • Obese persons or persons with a history of heart disease, low or high blood pressure, circulatory system problem, or diabetes should consult a physician before using a spa.
  • Persons using medication should consult a physician before using a spa since some medication may induce drowsiness while other medication may affect heart rate, blood pressure and circulation.
  • Check with doctor before use if pregnant, diabetic, in poor health, or under medical care.
  • People with infectious disease should not use a spa or hot tub.
  • To avoid injury exercise care when entering or existing the spa or hot tub.
  • Water temperature in excess of 40°C (104°F) may be injurious to your health.
  • Never use a spa or hot tub alone or allow others to use the spa alone.
  • Do not use a spa or hot tub immediately following strenuous exercise.
  • Do not put the spa under 4°C (39°F) environment in order to avoid freezing if there is still water in the pool.
  • Do not turn on the spa when the water is frozen.
  • Never pour water with a temperature higher than 40°C (104°F) into the spa directly.
  • Always unplug this product from the electrical outlet before removing, cleaning, servicing, or making any adjustment to the product.
  • Never jump or dive into a spa or any shallow body of water.
  • Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers, hedge trimmers and other equipment.
  • Do not attempt to plug in or unplug this product while standing in water or when your hands are wet.
  • Do not use the spa if damaged in delivery and/or malfunctioning in any way.
  • Keep all pets away from the spa to avoid any damage.
  • Do not add bath oil or bath salt to the spa water.
  • Do not leave an empty pool outside.
  • To prevent resetting of the thermal cut out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
  • The wired controller shall be properly stored at the side pocket when not used, to protect the controller from falling or other factors.
  • Spa heat in conjunction with alcohol, drugs, or medication can cause unconsciousness.
  • Exit immediately if uncomfortable, dizzy, or sleepy. Spa heat can cause hyperthermia and unconsciousness.
  • Avoid putting the head under water at all times.
  • Avoid swallowing spa water.

Warning: Water protection levels of appliance at different product zones are different see the following scheme. (Installation regulations comply to IEC 60364-7-702)

The hot tub’s electrical connections must be installed in the electrical safety zones labelled 1, 2 or outside all safety zones. The measured zones are limited by walls and fixed partitions.

NOTE-The measured zone dimensions are limited by walls and fixed partitions.

their walls or floors.
Zone 1| Zone 1 Zone 1 is limited by

• Zone 0 
• A vertical plane 2m from the rim of the basin. 
• The floor or the surface expected th be occupied by persons 
• The horizontal plane 2.5m above the floor or the surface

Zone 2| Zone 2 Zone 2 is limited by

• A vertical plane external th zone 1 and parallel plane 1.5m from the former. 
• By the floor or surface intended to be occupied by persons. 

Specifications

| 4 persons| 6 persons
---|---|---
Model| 17618XX| 17691XX
Capacity| 4 persons| 6 persons
Dimension (outer)| 156 cm × 70 cm
(Ø 61.4″ × 27,6″)| 184 cm × 73 cm
(Ø 72.4″ × 28,7″)
Dimension (inner)| 140 cm × 70 cm
(Ø 55″ × 27,6″)| 160 cm × 73 cm
(Ø 63″ × 28,7″)
Water capacity| 860 L (227 gal)| 1200 L (317 gal)
Power supply| 220-240 V,50 Hz, 2040W| 220-240 V,50 Hz,2040W
Max heat temperature| 40°C| 40°C
Test certificate| CE / UKCA| CE / UKCA
Heating efficiency Ambient temperature: 20°C| 1.5 – 2.5°C/h| 1.5 – 2.5°C/h

Package list

Ensure to check all parts are present:

8 Foam walls     Outer liner       Inner liner    Filter cartridge holder

Top cover        Pump unit    Filter cartridge   Repair kit

RCD plug        2 Caps          Pump unit connectors

Installation

WARNING: Spa installed on inadequately level surfaces are subject to leaking. forming irregularities or collapses. which can result in properly damage or serious injury for those in or around the spa area!

CAUTION: Please choose your set-up area carefully as lawn and other desirable vegetation underneath the ground cloth (if applicable) will die. Furthermore, try to avoid setting the ground cloth in areas prone to aggressive plant and weed species, as they may grow through the ground cloth.

Site selection

WARNING: Before proceeding to installation your spa, please make sure that the future location meets the following conditions:

• A level place in order to avoid any defect, hernia or leakage.
• Wide enough to support the pool and its pump unit.
• Able to support more than 500 kg/m².
• Sheltered from the sun and bad weather.
• Clean and free from sharp objects.
• Devoid of aggressive vegetation on the ground.

Failure to comply with these rules may result in property damage or personal injury.

A place with an awning       Clean the place            A level place

RCD test

WARNING: The RCD plug must be tested before each use..

Do not use if RCD test fails and see chapter – Troubleshooting

1. Insert the plug into the power outlet.

2. Press the «RESET» button, the indicator light turns red.

3. Press the «TEST» button, the indicator light turns off.

4. Press the «RESET» button, the indicator light turns red. The RCD works properly.

Grounding

You are recommended to use the services of a qualified electrician to ensure that the spa is electrically grounded by using a copper conductor of at least 2.5 mm² cross section.

Assembling

The number of persons required for installation: 1 adult at least.
10 minutes for site preparation and water filling.

1. Choose a flat and level location.

2. Extend the liner to the chosen area.

3. Add the foam wall segment with the three holes in it for connection to the base liner.

4. Adjust the 8 segments until they form a perfect round shape. Then, ensure that the holes for the outer liner connection and the holes in the foam wall are still aligned.

5. Install the connecting hose on the liner.

6. Insert the inner liner of your spa.

7. Locate the place where the two zippers are aligned, connect them first.

8. When installed at corner, push PE foam inward so that the coat can be installed in place

9. Make sure that the zippers of the liner and outer liners are aligned before zipping them up

10. Smooth the liner all around the SPA to ensure a good fit.

11. Connect the unit pump to the pool using the 3 connectors to screw.
    Ensure the icons on the pump and the pool match up.

12. Insert the cartridge into its filter holder and then screw on the suction fitting inside the basin. Cartridge location as shown.

13. Check that the drain plug is closed properly.

14. Fill the spa pool until the indicated fill level is reached. Your spa is ready to be used.

Warning: Do not leave spa unattended while filling with water.
Make sure the drain fitting is plugged securely and the cap is in place. Start filling the spa with water. After about 1-inch of water is on the bottom, stop filling and smooth wrinkles out of the bottom of the spa. Pull the outer wall out from the top edge, all around the bottom of the spa, so that it fills evenly
Continue filling the spa until water level.

Usage

Control panel

1. LED Display
2. Temperature Increase Button
3. Temperature units selector
4. Temperature Decrease Button
5. Temperature units indicator
6. Lock Button
7. Massage Button
8. Heat Button
9. Filtration

Functions

Once powered-up, the LED displays the current water temperature automatically.

The temperature units selector changes the temperature units from Celsius degrees to Fahrenheit degrees.

Press the temperature adjustment buttons, then the screen will flash. When it is flashing, you can set the desired temperature. The value will increase or decrease 1 degree at once. The temperature could be set between 30°C to 40°C (86°F to 104°F).

To lock or unlock the control panel, press the Lock button and hold 3 seconds.
Lock the control panel when you are away to prevent other people come to change your settings.

Press the massage button to activate the bubble massage system, the green indicator light turns on. It can be turned off by pressing it again.

Note:
– The massage system will stop automatically after 30 minutes of operation.
Re-activate the massage function by pressing the massage button again.
– When filter button is on, pressing bubble button will exchange filter mode into massage mode: filter indicator light will turn off and massage indicator light turn on. If press the bubble button again, the massage mode will be changed back to filter mode.

Press the filter button to activate the water filtration. The green indicator light will turn on when the filtration system is activated.

Note:
– If massage function is on, the filtration can’t be activated.

Press the heating button to activate water heating and filtering system at the same time. The green indicator light of filter and red indicator light of heating will turn on at same time.

The pump does not stop heating until the current water temperature reaches the set temperature; and the heating system will restart after the current water temperature drops 2°C below the set temperature automatically.
Maximum heating temperature: 40°C (104°F)

Important:
After 150 cumulative hours of filtration operation, the message “CHG FIL” is displayed on the filter block. This message is an automatic reminder to indicate that it is time to change the filter cartridge. To delete the message, hold the “filter” button for 5 seconds.

Note:
– With the heating system staring, the filtration system will start working together.
– After turning off the heating system, the filtration system will still work.
– If the massage function is active, the filtration and heating functions can not be activated

Pool cover and security

After each use, the control panel must be locked and the pool must be coated with its top cover and it must be attached to the base protector with the safety buckles.

Each safety buckles has a lock system ; closed buckle, the latch in up position locks the buckle, the latch in down position unlocks the buckle.

The top cover keeps the heat from the water and secures the pool.

Maintenance

Water maintenance

WARNING: A bad pool water quality can harm your health.

Depending on the frequency and conditions of use:

– The filter cartridge should be regularly cleaned (150 hours max.).
– The filter cartridge should be replaced every 1 to 2 month.
– The pool water should be changed every 15 to 30 days.

Use a water test kit to control the parameters of the water before using the spa, or at least once a week.
Use disinfection products for the spa. The treatment products should be used with caution and it is imperative to refer to their instructions.
Damage resulting from improper use of treatment products is not covered by warranty (overdose, shock treatment, …).

1. Water balance
The water balance (pH) must be maintained between 7 and 7.4.

2. Water Sanitation
To sanitize the pool water, we suggest using an active oxygen-based treatment or bromine placed in a floating dispenser.
(Dispenser sold separately).

Cleaning and replacing filter cartridge

Dirty filter cartridge may contaminate the pool water and cause damage to the heating function.

1. Unscrew the filter case by turning it counter-clockwise. Take out the filter cartridge from the case.
2. Rinse off the filter cartridge with a garden hose. If the filter cartridge remains dirty and discoloured, the filter cartridge should be replaced.
3. Put back the cleaned filter cartridge into his case and screw it to the pool.

Disinfection

Water Sanitation:
To sanitize the pool water, we suggest using an active oxygen-based treatment or bromine placed in a floating dispenser. (Dispenser sold separately)
If water is heavily polluted you should not use pool.
Clean pool with with specialist UV lighting equipment.
Seek professional advice and guidance before doing this.

Attention:
Detergent residues and dissolved solids from bathing suits and chemicals may build up on the spa walls, Use soap and water to clean the walls and rinse thoroughly with a garden hose using a direct powerful waterspray.

Drainage and storage

Drainage

• Check the stopper on the bottom of the pool and the drain cap.
• Unscrew the drain cap.
• Connect the drainage hose.
• Press the drain valve. Completely drain all water from the spa pool.

Once empty, the pool can be cleaned with soap and water.

Storage

• Press the bubbling button to blow out the water inside the jet holes. Unplug the pump, remove the filter cartridge from the inner wall of the pool.
• Use a towel to wipe off the pool, dry 24 hours.
• Push the valves to deflate the pool.
• Fold the pool.

It is recommended that store the SPA in its original package in a warm dry place.

Repair kit

Little holes or puncture can be repaired with the repair kit included and glue reserved to pool liner.

• Find the leak.
• Thoroughly clean the area surrounding the leak.
• Cut a piece of repair material in round shape, which should be larger than the damaged area.
• Apply adhesive to the underneath side of the patch and around the area to be repaired.
• Put the patch on the damaged area and press down firmly. Allow 12 hours for repair to dry. After patch has dried, apply glue around the edges for a complete seal (dry 4 hours).

Trouble shooting

Here are some useful tips to help you to diagnose and rectify common sources of trouble.

Reset the RCD plug / Check if the wiring system is adapted to the power of the pump unit.
Call for service if it does not reset
SPA pump does not heat properly| Temperature set is too low| Set to a higher temperature
Filter Cartridge is dirty| Clean or Replace the cartridge (see chapter – Cleaning)
Too low water level| Fill water to minimum water level
Heating element defective| Call for service
Bubble massage system does not work| Pump is overheating| Cut off the power and wait until the pump has cooled.
Auto shut-down feature (30min) is activated| Press the bubble button to reactivate
Malfunction of the pump unit| Call for service if it does not reset
Water filtration does not work| Filter Cartridge is dirty| Clean or Replace the cartridge (see chapter – Cleaning)
Inlet and outlet blocked| Clean the inlet and outlet
Air inside the pump| Fill water to minimum water level
Malfunction of the pump unit| Call for service if it does not reset
Pump leakage| Adaptor seal improperly| Replace the seal in the right position
Water leakage from pump body| Check the pump body, call for service
Spa pool leakage| Spa pool is torn or punctured| Use provided repair kit (see chapter – Repair kit)
Water is not clean| Insufficient filtering time| Increase the filtering time
Filter Cartridge is dirty| Clean or Replace the cartridge (see chapter – Cleaning)
Pool filled water quality| Change the pool water completely
Improper water treatment| Refer to the chemical manufacturer’s instructions
CHG FIL| After 150 cumulative hours of filtration operations, an audible alarm will sound and the LCD display will show the characters CHG, followed by FIL, to remind you to change or clean the filter. You can hold the filtering button 5 seconds to turn off the buzzing. The filtering system will turn off, you can press the button to active the filtering system again.

Error code

If the screen displays an error code “Ex”, please refer to the table below.

1. The filled water is over 45°C (113°F)
2. The filter cartridge was put on the wrong suction fitting (higher suction fitting).

|

1. Cut off the power, make sure the pool water is between 2°C~44°C (36°F~111°F). If this does not solve the problem, refer to the box below.
2. Put the filter cartridge on the lower suction fitting.

E4| All functions do not work, buzzing warn.| Low water temperature indicator.| The pool water is lower than 2°C (36°F).|

• Cut off the power, make sure the pool. water is between 2°C~44°C (36°F~111°F)
• If this does not solve the problem, refer to the box below

E5| All functions do not work, buzzing warn.| High water temperature indicator.| The filled water is over 50°C (122°F)|

• Cut off the power, turn to qualified electrician to reset the thermal cutout described in next paragraph.
• If this does not solve the problem, refer to the box below

E6| Not heating and filtering properly. Buzzing warns.| Water pressure is not big enough to activate heating.|

• Inlet or outlet on inner wall are blocked.
• Filter cartridge is too dirty.
• Pool water does not reach minimum water level.
• Do not release air from pump

|

• Clean inlet and outlet
• Clean or replace filer cartridge
• Add water to reach water level
• Do air release as outlined again
• If this does not solve the problem, refer to the box below

E3, E4, E5, E6 error code

Cut off electricity for 5 minutes and reconnect.

If error code is still displayed on the control Box, please do the following instructions

• Check that the water line is between the high and low limits.
• Clean or replace the filter cartridge.
• Unscrew and clean the 2 nozzles (Entry and exit of water) inside the spa and remove wastes if necessary (Neaf, hairs, fur, skin…)
• Check that the propeller of the filter pump does not contain foreign matter.

Cut the spa again electrically for 5 minutes and re-connect it, if the error code is still displayed on the control box please contact the Service Center.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
IČO: 27082440

Subject of the declaration:
Title: SPA
Model / Type: 17618XX, 17691XX

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):
Directive No. (EU) 2014/53/EU
Directive No. (EU) 2011/65/EU as amended 2015/863/EU

Prague, 26.06.2021

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>