avenli 29P414DE Super Clean Filter Pump User Manual
- June 6, 2024
- avenli
Table of Contents
FP14-20-GB
SUPER CLEAN FILTER PUMP
USER’S MANUAL
29P414DE/29P415DE/29P416DE/29P417DE
Attention: Read all instructions carefully before installing the filter pump.
Instruction
We thank you for your purchase of our filter pump. We think you will find it
quite simple to install and perform efficiently.
This filter pump system has been manufactured to the highest quality standards
and will provide seasons of clean, sparkling-clean water activity in your new
Prompt Set Pool, Round Steel Frame Pool, Oval Steel Frame Pool, and
Rectangular Steel Frame Pool. Here is a Jilong filter pump manufactured as
high-quality performance that combines superior filtration and the following
features:
Designed for above ground swimming pool High volume flow through filter
Easy installation and maintenance
Low cost on maintenance and operation
Offer quiet and high-quality performance
Quality certified construction
Reliable, corrosion-proof, and reinforced material
Elegant and delightful design
Smaller dimension easy to store and compact for winter
UL & GS certificated filter pump
Safer for swimming and for the environment
This filter pump system manual will provide you with all of the easy
instructions you need to follow in order to set up and operate this state-of-
the-art filter pump system efficiently.
In addition to set-up instructions and operational guidelines, we have also
included several very important Warning and Caution statements that pertain to
the safe use and enjoyment of this new filter pump system. It is very
important that you take the time to read them all and share them with any
individuals that will ultimately be enjoying the use of your pool.
Please make certain that you read and understand the information contained in
this Manual prior to initial use.
Safety instructions
When you want to install and use this electric equipment, follow the below
important points and take precautions:
WARNING Check all clamps and system accessories before running the pump.
WARNING Do not bury the supply cord of the adapter. Locate supply cord of
adapter where it will not be damaged by lawnmowers, hedge trimmers, and other
equipment.
WARNING This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance
WARNING Don’t use this filter pump to vacuum the pool. And this unit is
designed only for a storable pool, not for a permanently installed pool.
WARNING The power cord of the adapter and input wire of the pump cannot be
replaced. If the power cord or input wire is damaged, the adapter or pump
should be scrapped
WARNING Do not place the 230 V adapter near the pool. The transformer and
socket outlet should be placed more than 3.5m away from the pool. The pump and
the adapter must not be installed in areas that can be flooded (and which do
not have an adequate outlet).
WARNING Make sure that the outdoor socket is protected by a residual current
device (RCD) with a rated residual operating current not exceeding 30 mm.
WARNING Do not drop the filter pump or adapter into water.
WARNING Before starting the filter pump must fix the filter base with screws
on a solid surface to fasten.
WARNING Avoid overheating on the filter pump motor. Make sure the pump is
running with water and never left off the water when using this appliance.
Improper use to cause overheating will make the motor burn out and damage.
WARNING Remnant air will make the pump to race and damage the filter pump.
Gently turn the air release valve (P1) to drive out all of the air in the hose
and filter housing.
WARNING: This appliance can only be used by children aged 8 years and above or
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning the safe use of the appliance and understand the hazards involved.
Do not allow children to play with this appliance. Children should not
undertake cleaning or user maintenance without supervision WARNING: The supply
cord cannot be replaced if the cord is damaged the appliance should be
scrapped.
WARNING: The pump must not be used when people are in the water.
WARNING: The pump must be supplied through a residual current device
(RCD)having a rated residual operating current not exceeding 30mA.
WARNING: The maximum total head is 0.9 in meters(for pumps having a rated
power input exceeding 50W)
WARNING: This appliance should be installed at least 2m from the pool and the
plug shall be located 3.5m from the pool. (Only for France market)
WARNING: The pump must be fixed on the ground or on a certain pedestal with
two Φ5 bolts or screws to prevent accidental falling (see next picture).
Item No. | Description | QTY |
---|---|---|
P1 | Air purge cover | 1 |
P2 | Air purge cover seal | 1 |
P3 | Filter chamber cover retainer | 1 |
P4 | Filter chamber cover | 1 |
P5 | Filter chamber rubber gasket | 1 |
P6 | Filter cartridge | 1 |
P7 | Filter chamber | 1 |
P9 | Power cable | 1 |
P10 | O ring | 2 |
P11 | Hose Clamp | 4 |
P12 | Connector Hose | 2 |
P13 | Filter Net Only for 300&530gal | 2 |
P14 | Connector Only for 300&530gal | 2 |
Installation Instructions
Please see the diagram of Page 6 & Page 7 for reference.
- Before starting to install the filter pump, make sure to set up the pool and fill the water firstly following the pool’s installation instructions step by step. Operate the filter pump only when the water has reached the maximum level in the pool. Low water pressure in the pump may result in noisy motor sound.
- Remove the filter pump and hoses from the packaging.
- Place the Filter Pump below pool water at least 0,2 m and shall not over 1,0 m.
- Please Note: The filter pump needs to be mounted on solid and even ground. There are mounting holes located in the pump base and you can mount the pump with screws.
- Put the Filter Cartridge (P6) into the Filter chamber (P7) and make sure the FilterCartridge (P6) is inside of the Filter chamber (P7).
- Put Filter Housing O-Ring (P5) on Filter chamber (P7).
- Put Filter Housing Cover (P3) on Filter chamber (P7).
- Then finger tighten the Filter chamber cover retainer (P3) in a clockwise motion.
- Connect one Filter Hose (P12) to the inlet port of the Filter Pump (top) and the lower hose connection of the pool. Fix the hose with the hose clamps (P11).
- Gently turn the air release valve (P1) in a counter-clockwise direction 1-2 turns.
- Connect the 2nd Filter Hose (P12) to the upper hose connection of the pool and the outlet port (bottom) of the Filter Pump (see page 7). Fix the hose with the hose clamps.
- The sound pressure level is less than 82 dB (A).
INSTALLATION ILLUSTRATION
Operating Instructions
- Make sure the pool is already filled with water and place the Filter Pump in a suitable position.
- With water flowing into the filter pump, the water pressure will allow the air entered inside to escape from the air release valve (P1).
- Then gently finger tighten the air release valve (P1) in a clockwise direction.
- Connect the power supply cord of the adapter to AC 230V to operate the Filter Pump until the clarity of the water in the pool is obtained.
General Maintenance
- Disconnect power to the motor before working on the pump or motor.
- Depending on the parts usage, keep some spare available, strongly command to have two Filter Cartridges for spare use.
- No lubrication or regular mechanical maintenance is needed.
- Wash outside of filter with a mild detergent and water, rinsing off with a hose.
- Do not use solvents to clean the filter; solvents may damage plastic components in the system.
- Maintain pH level at 7.0 to 7.4 in the pool.
- The voltage of the adapter is AC 230V.
- Do not place the Filter Pump in tall grass it might cause the motor’s overheat.
- After pool water is completely emptied out, remove all pool hoses from the pool and Filter-Pump.
- Exhaust water from all housings of the Filter Pump.
- Store all filter pieces in a dry storage location and with ventilation. Before storage, make sure all parts are dry.
- You can store the Filter Pump in a dry location and take advantage of the original packing carton for storage for next season’s usage.
Cleaning and Replacement
- Make sure the 230 V adapter disconnects the power supply cord from the electric outlet.
- In a counter-clockwise direction to remove the Filter chamber cover retainer (P3). Place it in a safe location.
- Clean the used Filter Cartridge (P6) or replace it if necessary.
- Check the inside of the Filter chamber (P7).
- If dirt or sediment is found on the bottom of the housing then e.g. with a bucket of water or a garden hose to flush the housing out of sediment or dirt.
- Return the Filter chamber cover retainer (P3) to its position and in a clockwise direction to fasten onto the Filter Housing.
- Reconnect the power supply cord of the adapter.
Trouble Shooting Guide
PUMP DOES NOT OPERATE:
A. Check for blown fuses, circuit breakers, or disconnected electrical wiring.
B. Check motor. If the motor is too hot or overloaded shut it off. Let motor
cool down.
C. Consult expert.
MOTOR RUNS, BUT DOES NOT PUMP WATER OR WATERFLOW IS TOO SLOW:
A. Check for obstructions in intake hose or discharge hose inside pool wall.
B. Tighten hose clamps, check hoses for damage, check the pool water level.
C. Clean filter cartridge more often. Reusable and easy to clean e.g. with a
garden hose.
D. Replace filter cartridge.
E. Consult expert.
PUMP LOSES PRIME
A. Make sure the water level in the pool is at least 5 cm above the bottom of
the skimmer throat with the system not operating.
B. Make sure there are no leaks in the suction piping.
C. Check if the filter cartridge is dirty and needs cleaning. Reusable and
easy to clean e.g. with a garden hose.
D. Consult export.
FILTER DOES NOT CLEAN POOL
A. Adjust chlorine and pH level.
B. Clean or replace filter cartridge. Reusable and easy to clean e. g. with a
garden hose.
C. Check for holes in the cartridge. Replace if damaged.
D. Let the pump operates more longer.
E. Clean away debris from strainer screen at pool wall.
F. Consult expert.
LIMITED WARRANTY
ATTENTION CUSTOMER – Please read this statement carefully and keep your
original store receipt along with this warranty certificate at all times. Your
receipt is required as proof of purchase and to verify the length of your pool
ownership.
We warrant all components contained in this filter pump against defects in
materials and workmanship under normal use and service, for a period of 365
days from the date of purchase for the original owner only. If any of the
components have been consumer-replaced, damaged, or misused, the corresponding
warranty on those components is invalidated. In this situation, you will be
advised of the cost of replacement parts and processing instructions. Please
register warranty within 30 days of purchase on
www.jilong.com in order to validate your warranty.
If a verifiable manufacturing defect is found during the relevant time period,
we agree to repair or replace at its option any Pumps under warranty provided
a proper proof of purchase is presented.
This limited warranty is not valid if the pool is used for commercial
purposes, or if the damage is caused by an accident, an act of God, consumer
misuse, neglect or abuse, vandalism, improper use of chemicals, exposure to
extreme weather conditions or negligence during pool set up or disassembly.
We cannot be held responsible for the cost of installation (including water),
labor, or transportation expenses incurred due to the replacement of defective
parts. This limited warranty, furthermore, does not cover any unauthorized
alterations to the pool system.
SHANGHAI JILONG SPORT AND LEISURE PRODUCTS CO., LTD
2555 XiuPu Road, Pudong Area,Shanghai,China.
www.JLeisure-Global.com
JIANGSU JILONG SPORT AND LEISURE PRODUCTS CO., LTD
NO.1 Industrial Area South Zhongchen Road Zhongyang Town, Suqian, Jiangsu,
China
Correct Disposal of this product
This marking indicates that this product should not be disposed of with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmentally safe recycling.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>