aspemhome I248-6052 Counter Height Din Table Instruction Manual
- June 1, 2024
- aspemhome
Table of Contents
aspemhome I248-6052 Counter Height Din Table
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may come loose inside the carton during shipment.
Tools Required (Not Provided)
- Phillips Screwdriver
Hardware and Components
| Hardware List: | Components List: |
|---|---|
| No. | Description |
| --- | --- |
| A | Bolt 05/16″ x 2-1/4″ |
| B | Lock Washer 05/16″ |
| C | Flat Washer 05/16″ x 3/4″ |
| D | Allen Wrench 4mm |
| No. | Description |
| --- | --- |
| 1 | Table Top |
| 2 | Leg |
Assembly Options
-
Option 1
Visual representation of a table with four legs. -
Option 2
Visual representation of an expandable table with a leaf and levelers on legs.
Functionality Instruction
Illustration depicting the operation of the leaf mechanism in the table,
showing the location and operation of the table locks and leveler on legs.
Before Use
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE
INSTRUCTIONS. Save these instructions for future reference. FOR INDOOR USE
ONLY Page 1/2
MADE IN VIETNAM
Date: 04-12-2023
Assembly Steps
For Option 1:
STEP 1: Lay the table top face down on a soft surface. Attach the legs to
table top by using 8 bolts (A), lock washers (B), flat washers (C) with an
allen wrench (D). Completely tighten all bolts. Remove 4 wood blocks by taking
out 8 wood screws, then turn the assembled table to the upright position.
For Option 2:
STEP 2: Turn the table locks under the table top to the OFF position as
shown below. Fully extend both sides of table as shown below.
STEP 3: Remove the leaf in opening and push ends of table together to
close the gaps in table top. Turn the table locks to the ON position.
Specifications
| Item Number | I248-6052 |
|---|---|
| Description | Counter Height Din Table |
| Country of Manufacture | Vietnam |
| Assembly Options | Two options for assembly |
| Tools Required | Phillips Screwdriver (Not Provided) |
| Page Numbers | 1 of 2, 2 of 2 |
| Use | Indoor Only |
FAQ
What tools will I need for assembly?
A Phillips screwdriver is required for assembly, which is not provided with
the product.
Are there any special care instructions before using the table?
Yes, it is important to read, understand, and follow the assembly
instructions carefully before use.
Can this table be used outdoors?
No, this table is intended for indoor use only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>