GYS 027978 Smart Light Module Instruction Manual

** SMART LIGHT MODULE**

027978 Smart Light Module

FIG I

SAFETY INSTRUCTIONS

This manual includes guidelines on the operation of your device and the precautions to follow for your own safety. Ensure it is read carefully before first use and keep it handy for future reference. These instructions should be read and understood before anyone operates the product. Any modifications or maintenance that are not specified in the manual should not be undertaken. The manufacturer is not liable for any injury or damage due to non-compliance with the instruction manual. In case of problems or  ncertainties, please consult a qualified person that is able to handle the device correctly. This device must only be used for light and acoustic signalling within the limits indicated in the manual. The safety instructions must be followed. In case of improper or unsafe use, the manufacturer cannot be held responsible
Device suitable for indoor use only. Do not expose to rain or excessive moisture.
Do not place the device near a fire or subject it to heat or to longterm temperatures exceeding 50°C
Do not obstruct the cooling vents. Refer to the installation section before operating the machine.

Maintenance:

• Service should be performed by a qualified person
• Under no circumstances should solvents or other aggressive cleaning agents be used.
• Clean the device’s surfaces with a soft, dry cloth.

Regulations

• The device complies with European Directive.
• The certificate of compliance is available on our website.
• Equipment in compliance with British requirements. The British Declaration of Conformity is available on our website (see home page).
• Equipment in conformity with Moroccan standards.
• The declaration C (CMIM) of conformity is available on our website (see cover page).

Disposal:

• This product should be disposed of at an appropriate recycling facility. Do not dispose of in domestic waste.

DESCRIPTION OF THE ITEM

The Smart Light Module is an accessory for GYS «Connected» products (chargers, welding machines, etc.) to display their operating status by means of a multicolored indicator and an audible warning.

• Multicolored indicator
• SMC connector
• SMC connecting cable
• Velcro strap
• SMC connector locking screw

OPTION

3m SMC connecting cable réf. 025691

INSTALLATION AND CONNECTION TO THE HOST PRODUCT

Connect the SLM to the host product using the SMC connection cable (ref. 025691).

The power supply and control of the SLM is from the host product.

OPERATION WITH A GYSFLASH PRO CNT

Light

Buzzer
In addition to the indicator light which flashing red in the event of a fault, the SLM is fitted with an audible warning device.
The SLM buzzer is linked directly to the Gysflash CNT audible buzzer. Deactivating the charger buzzer deactivates that of the SLM and vice versa.

FAULT IDENTIFICATION

connection and condition of the SMC connecting cable
Electronic problem on the card| Contact your distributor
Buzzer not working| SMC connection cable badly connec- ted or damaged| Check the connection and condition of the SMC connecting cable
Electronic problem on the card| Contact your distributor

INSTALLING THE SMC CONNECTOR LOCKING SCREWS

To ensure a good connection of the SMC cable between the SLM and the host product, it is recommended to fit the supplied screws and spring washers on the SMC connectors in accordance with the assembly below:

VELCRO FASTENING
The black Velcro straps can be glued under the mounting plates of the SLM in order to fix it easily.

SPARE PARTS

WARRANTY

The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:

• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
  In case of failure, return the unit to your distributor together with:
  – The proof of purchase (receipt etc …)
  – A description of the fault reported

ELECTRICAL DIAGRAM

TECHNICAL SPECIFICATIONS

Smart Light Module

EN 62233 (EMF)
CEI EN 60529 (IP)
EN 50581 (RoHS)
EN 55014-2 (CEM)

SYMBOLS

|  Material complies with European directives. The EU dedaration of conformity is available on our website (see on the cover page).
---|---
| – Equipment in compliance with British requirements. The British Declaration of Conformity is available on our website (see home page).
| – Equipment in conformity with Moroccan standards. The declaration C, (CMIM) of conformity is available on our website (see cover page).-
| – This material is subject to separate collection according to EU Directive 2012/19 / EU. Do not dispose with household waste!
| – Triman

GYS SAS
1, rue de la Croix des Landes
CS 54159
53941 SAINT-BERTHEVIN Cedex
FRANCE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>