AiBOCN AB-GS3011 Smart Lock Keyless Entry Door Lock Deadbolt Installation Guide

June 6, 2024
AIBOCN

AiBOCN - logo

Quick Installation Guide
Please Check the Opening Direction of the Door
AiBOCN AB-GS3011 Smart Lock Keyless Entry Door Lock
Deadbolt

2. Adjust the Length of the Deadbolt
This deadbolt has two lengths: 60mm (2-3/8″) and 70mm (2-3/4″), Adjust the length of the deadbolt according to the distance from the center of the door hole to the door rame, When adjusting, please press the lock tongue with your thumb and don’t let the lock tongue come out, The factory default length of this deadbolt is 60mm (2 3/8″). If the length of your door is 70mm (2 3/4″), please turn the deadbolt clockwise 45° to switch to 70mm (2 3/4″). ( Confirm that The deadbolt is unlocked state during installation )

AiBOCN AB-GS3011 Smart Lock Keyless Entry Door Lock Deadbolt -
unlock

AiBOCN AB-GS3011 Smart Lock Keyless Entry Door Lock Deadbolt -
unlock1

3. Information about the DeadboltAiBOCN AB-GS3011 Smart Lock Keyless
Entry Door Lock Deadbolt - Deadboit

Adjustable Length of Deadbolt: 60/70mm (29/,)(29/,) Material: Cuprum

AiBOCN AB-GS3011 Smart Lock Keyless Entry Door Lock Deadbolt - Deadboit
Cuprum

4. Installation Details of Left and Right Doors

AiBOCN AB-GS3011 Smart Lock Keyless Entry Door Lock Deadbolt - Left and
right door

Adjust the left and right direction buttons on the back panel according to the opening direction of the door ( Confirm that The deadbolt is unlocked state during installation ).

AiBOCN AB-AiBOCN AB-GS3011 Smart Lock Keyless Entry Door Lock Deadbolt -
Left and right doorGS3011 Smart Lock Keyless Entry Door Lock Deadbolt - Left
and right door

5. Adjust the Lock Spindle
a. When installing, please keep the lock spindle vertically inserted into the deadbolt.AiBOCN AB-GS3011 Smart Lock Keyless Entry Door Lock Deadbolt - Left
and right doorlock

Keep Lock Spindle vertical during installation
b. Taking into account the different thicknesses of the door (38-48mm), in order to make the door and the smart lock fit perfectly together, we designed a locking spindle that can be ut off. You can decide the length of the lock spindle according to the thickness of your door. (A total of 7 sections, convenient for you to cut off the lock spindle). We recommend that you install the door lock first. After installation, if there is a gap between the back panel of the door lock and the door as shown below), cut a section of the lock spindle until there is no gap between the back panel and the door. (Please pay attention to safety when cutting off the lock spindle).AiBOCN AB-GS3011
Smart Lock Keyless Entry Door Lock Deadbolt - Left and right
doorlock1

Note : Cut the length of the lock spindle according to the thickness of the door
There is a gap between the back panel and the door
This guide is a detailed description of the installation, not a substitute for the manual. For further details and guidelines, please refer to the manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals