datek Home Scene Selector User Manual
- June 3, 2024
- datek
Table of Contents
datek Home Scene Selector
The Scene Selector can be used to control other smart home devices and is an essential part of any smart home. Utilizing Zigbee and a pairing button, the introduction of this device into a smart home is very easy. The Scene Selector has 6 buttons that can be individually configured.
INSTRUCTION
The new standard for controlling a smart home
In addition to buttons that can be used to control other devices in the smart
home, the Scene Selector also contains a temperature sensor. This unique
feature allows a smart home system to use it to control heat sources based on
the temperature where the Scene Selector is installed.
The Scene Selector updates over the air (OTA).
Design customization and branding
It has become evident that design and branding heavily affects the market of
electronics. We therefore offer customization to suit your brand recognition.
Home. Connected.
Specifications
Power source
- Battery: 2 x CR 2450
Local Communication Options
- Radio Protocol: Zigbee 3.0, supports HA 2.1
- Frequency: 2400-2483,5 MHz (IEEE 802.15.4)
Environment
- IP Class: IP20 (Indoor use)
- Operational temperature: 0 to +40 °C
- Shipping/storage temperature: -20 to +45 °C
- Humidity range: 0 to 90% R.H.(non-condensing)
General
-
Dimensions: L:84 W:84 H:14 (mm)
-
Number of programmable buttons: 6
-
Delivered with icon stickers
OTA (Over The Air)
Embedded temperature sensor
Low battery warning
LED indicator
Supervision enabled -
Compliance: CE
www.datek.no / Tlf: 920 38 000
Subject to change without notice 2021-06-07-v1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>