datek HSE2919E Home Water Sensor User Manual
- June 3, 2024
- datek
Table of Contents
datek HSE2919E Home Water Sensor
Home Water Sensor
The Water Sensor stands out as one of the smallest sensors of its kind on the market. Utilizing Zigbee and a pairing button, the introduction of this device into a smart home is very easy. The small device will make it possible to detect water leakage and is an essential component in any smart home.
The new standard for water sensors
The sensor offers a unique feature allowing it to detect different levels of
water leakage and is designed to differentiate between low levels of moisture
and sudden bursts of water leaks.
The Water Sensor updates over the air (OTA).
Design customization and branding
It has become evident that design and branding heavily affects the market of
electronics. We therefore offer customization to suit your brand recognition.
Home. Connected.
Specifications
-
Power source
- Battery: 2x CR 2450
-
Local Communication
- Radio Protocol: Zigbee 3.0, supports HA 2.1
- Frequency: 2400-2483,5 MHz (IEEE 802.15.4)
-
Environment
- IP ass: IP20 ndoor C)l (I use
- Operational emperature: 0 o 0 t t +4 °C
- Shipping/storage temperature: -20 o t5 t +4 °C
- Humidity anger: 0 o 0% .H.(neon- condensing
-
General
-
Dimensions: L:55 W:55 H:14 (mm)
-
Upgrade method: OTA (Over The Air)
-
Water detection in two levels:
-
instant alert if large amounts of water
-
delayed warning to avoid false detections for small water spills that will evaporate (e.g. when cleaning floor)
Embedded temperature sensor Low battery warning LED indicator and pairing button Supervision enabled -
Functionality: Two level water detection
-
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>