FUJIFILM X-T5 Digital Photography Camera Instruction Manual

: June 3, 2024
: Fujifilm

FUJIFILM X-T5 Digital Photography Camera

For Your Safety

IMPORTANT SAFETY INSTRUCTIONS

Read Read Instructions: All the safety and operating instructions should be read before the appliance is operated.
Retain Retain Instructions: The safety and operating instructions should be retained for future reference.
Heed Heed Warnings: All warnings on the appliance and in the operating instructions should be adhered to.
Follow Instructions: All operating and use instructions should be followed.

Instructions

Power Sources: This video product should be operated only from the type of power source indicated on the marking la-bel. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For video products intended to operate from battery power, or other sources, refer to the operating instructions.

Grounding or Polarization: This video product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will ﬁ t into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to ﬁ t, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

Alternate Warnings: This video product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only ﬁ t into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to re- place your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.
Overloading: Do not overload wall outlets and extension cords as this can result in a risk of ﬁ re or electric shock.
Ventilation: Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the video prod-uct and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface.
This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. This video product should never be placed near or over a radiator or heat register.
Attachments: Do not use attachments not recommended by the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video product near water—for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
Power-Cord Protection: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
Accessories: Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video product. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. FUJIFILM-X-T5-Digital-Photography-
Camera-01 An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

Antennas

Outdoor Antenna Grounding: If an outside antenna or cable system is connected to the video product, be sure the an-tenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

Power Lines: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

Use

Cleaning: Unplug this video product from the wall outlet be-fore cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Object and Liquid Entry: Never push objects of any kind into this video product through openings as they may touch dan-gerous voltage points or short out parts that could result in a ﬁ re or electric shock. Never spill liquid of any kind on the video product.
Lightning: For added protection for this video product re-ceiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power-line surges.

Service

Servicing: Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualiﬁed service personnel.
Damage Requiring Service: Unplug this video product from the wall outlet and refer servicing to qualiﬁed service personnel under the following conditions:

When the power-supply cord or plug is damaged
If liquid has been spilled, or objects have fallen into the video product.
If the video product has been exposed to rain or water.
If the video product has been dropped or the cabinet has been damaged.

If the video product does not operate normally follow the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjust-ment of other controls may result in damage and will often require extensive work by a qualiﬁ ed technician to restore the video product to its normal operation.
When the video product exhibits a distinct change in perfor-mance — this indicates a need for service.
Replacement Parts: When replacement parts are required, be sure the service technician has used replacement parts spec-iﬁ ed by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in ﬁ re, electric shock or other hazards.
Safety Check: Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition.

Be sure to read these notes before use

Safety Notes

Make sure that you use your camera correctly. Read these safety notes and your Basic Manual carefully before use.
After reading these safety notes, store them in a safe place.

About the Icons
The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the in-formation indicated by the icon is ignored and the product is used incorrectly as a result.

warning
This icon indicates that death or serious in-jury can result if the information is ignored.

caution
This icon indicates that personal injury or material damage can result if the information is ignored.

The icons shown below are used to indicate the nature of the instructions which are to be observed.

Triangular icons tell you that this information re-quires attention (“Important”).
Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an action that must be performed (“Required”).

The symbols on the product (including the accessories) rep-resent the following:

AC
DC
Class II equipment (The construction of the product is double-insulated.)

WARNING
If a problem arises, turn the camera off , remove the battery, disconnect the USB cable, and unplug the AC power adapter. Continued use of the camera when it is emitting smoke, is emitting any unusual odor, or is in any other abnormal state can cause a fi re or electric shock. Contact your Fujifilm dealer
Do not allow water or foreign objects to enter the camera or connecting cables. Do not use the camera or connecting cables following ingress of fresh or salt water, milk, beverages, detergents, or other liquids.
Should liquid fifi nd its way into the camera or connecting cables, turn the camera off , remove the battery, disconnect the USB cable, and disconnect and unplug the AC adapter. Continued use of the camera can cause a fire or electric shock. Contact your Fujifilm dealer.

WARNING

Do not use in the bathroom or shower| _ _Do not use the camera in the bathroom or shower__ . This can cause a ﬁre or electric shock.
Do not disassemble| _ _Never attempt to__ _ _ch__ _ _ang__ _ _e or take apart the camera (nev__ – er open the case) . Failure to observe this precaution can cause ﬁre or electric shock.
Do not touch internal parts| _ _Should__ the ca _ _se__ break open as the result of a fall or othe r a _ _ccident, do not t__ _ _ouch the expo__ _ _se__ _ _d parts__ . Failure to ob- serve this precaution could result in electric shock or in injury from touching the damaged parts. Re- move the battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation.
| _ _Do not change, heat or unduly twist or pull the connec__ _ _tion__ cord and do not pla _ _ce__ heavy objects on the _ _connection__ _ _c__ _ _ord__ . These actions could damage the cord and cause a ﬁre or electric shock. If the cord is damaged, contact your Fujiﬁlm dealer. Do not use cables with bent connectors.
| _ _Do not plac__ _ _e the camera on an__ _ _uns__ _ _tabl__ _ _e surfa__ _ _ce__ . This can cause the camera to fall or tip over and cause injury.
| _ _Never attempt to take pictures while in__ _ _motion__ . Do not use the camera while walking or driving. This can result in you falling down or being involved in a traﬃc accident.
| _ _Do not touch any metal parts of the camera during a__ thunderst _ _orm__ . This can cause an electric shock due to induced current from the lightning discharge.
| _ _Do not use the batt__ _ _ery except as specifi__ _ _ed__ . Load the battery as shown by the indicator.
| _ _Do not disassemble, modify , or heat batteries. Do no t drop, strike, or throw batteries or otherwise subjec t them to strong impacts. Do not use batteries that show signs of leaking, deformation, discoloration, or othe r abnormalities. Use only designated chargers to re – charge rechargeable batteries and do not attempt to re – charge non-rechargeable Li-ion or alkaline batteries. Do not short batteries or store them with metallic objects . Failure to observe these precautions could result in the batteries overheating, igniting, rupturing, or leaking, causing ﬁre, burns, or other injury.
| _ _Use only batteries or AC pow__ _ _er adapters specified fo__ r u _ _se__ _ _with this camera. Do not u__ _ _se__ _ _v__ _ _oltages__ ot _ _her__ _ _than the__ power supply voltage shown . The use of other power sources can cause a ﬁre.
WARNING

| _ _If the battery leaks and fluid gets in contact with you__ r eyes, skin or clothing, flush the affected area with clean water and seek me _ _dical att__ _ _en__ _ _tio__ _ _n or call an emergency__ number right _ _away__ .
| _ _Do not use the charger to charge__ _ _batteries other than__ those specified here . The supplied charger is for use only with batteries of the type supplied with the camera. Using the charger to charge conventional batteries or other types of rechargeable batteries can cause the battery to leak, overheat or burst.
| _ _Using a flash too close to a person’s eyes may cause__ visual impairment . Take particular care when pho- to graphing infants and young children.
| _ _Do not remain in prolonged contact with hot surfaces__ . Do not leave one part of the body in contact with the product for prolonged periods _ _while the product is on__ . Failure to observe this precaution could result in low-temperature burns, particularly during pro- longed use, at high ambient temperatures, when HIGH is selected for AUTO POWER OFF TEMP. , or with users who suﬀer from poor circulation or reduced sensation, in which case use of a tripod or similar precautions are recommended.
| _ _Do not use in the pre__ _ _sence of flammable objects,__ expr plosive gases, or dust .
| _ _When carrying__ _ _the battery, install it in a digital camera__ or keep it in the hard case. When storing the battery , keep it in the hard case. When discarding, cover the battery terminals with insulation tape . Contact with other metallic objects or batteries could cause the battery to ignite or burst.
| _ _Keep memory cards, hot shoes, and other small par__ _ _t__ s out of the reach of small children . Children may swallow small parts; keep out of reach of children. Should a child swallow a small part, seek medical attention or call emergency.
| _ _Keep out of reach of small children__ . Among the elements that could cause injury are the strap, which could become entangled about a child’s neck, causing strangulation, and the ﬂash, which could cause visual impairment.
| _ _Follow the directions of airline and hospital personnel__ . This product generates radio-frequency emissions that could interfere with navigational or medical equipment.
CAUTION

| _ _Do not use this camer__ _ _a in loca__ _ _ti__ _ _ons__ _ _affected by oi__ l fumes, steam, h _ _umidity or dust__ . This can cause a ﬁre or electric shock.
| _ _Do not leave this camera in pla__ _ _ce__ _ _s subject to extremely__ high temperatures . Do not leave the camera in locations such as a sealed vehicle or in direct sunlight. This can cause a ﬁre.
| _ _Do not place heavy objec__ _ _ts on the camera__ . This can cause the heavy object to tip over or fall and cause injury.
| _ _Do not move the camera while the AC power adapter i__ s still connec _ _ted__ . Do not pull on the connection cord to disconnect the AC power adapter. This can damage the power cord or cables and cause a ﬁre or electric shock.
| _ _Do__ not cover or wrap the camer _ _a__ or the AC power adapt – er in a cloth or blanket . This can cause heat to build up and distort the casing or cause a ﬁre.
| _ _Do not use the plug if it__ _ _is dam__ _ _aged or if it does__ _ _not fi__ t securely into the outlet . Failure to observe this pre- caution could result in ﬁre or electric shock.
| _ _When you are cleaning the camera or you do not plan to__ u _ _se the camera for an extended__ _ _pe__ _ _rio__ _ _d, remove the bat__ – tery and disconnect and unplug the AC power adapt _ _er__ . Failure to do so can cause a ﬁre or electric shock.
| _ _When charging ends, unplug the charger from the__ power socket . Leaving the charger plugged into the power socket can cause a ﬁre.
| _ _When a memory c__ _ _ard is removed, the card could come__ out of the slot too quickly. Use your finger to hold it and ge _ _ntly release the card__ . Injury could result to those struck by the ejected card.
| _ _Do not handle the memory card immediately afte__ r shooting . The memory card may be hot, resulting in burns. Wait for the card to cool before removing it from the camera.
| _ _Request regular internal__ _ _testing and cleaning for you__ r c _ _ame__ _ _ra__ . Build-up of dust in your camera can cause a ﬁre or electric shock. Contact your Fujiﬁlm dealer to request internal cleaning every two years. Please note that this service is not free of charge.
| _ _Dispose of the product in accord with location r__ _ _egula__ _ _tions__ .
| _ _Danger of explosion if battery is incorrectly replaced__ . R _ _ep__ _ _lace only with the same or equivalent__ _ _type__ .
| _ _Batteries (batt__ _ _ery pack or batteries installed) shall no__ t be exposed to excessive heat such as sunshine , fire o__ r the like .

The Battery and Power Supply

Note: Check the type of battery used in your camera and read the appropriate sections.
WARNING: Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
The following describes the proper use of batteries and how to prolong their life. Incorrect use can shorten battery life or cause leakage, overheating, ﬁ re, or explosion.

Li-ion Batteries
Read this section if your camera uses a rechargeable Li-ion battery.
The battery is not charged at shipment. Charge the battery before use. Keep the battery in its case when not in use.

Notes on the Baes on the Battery
The battery gradually loses its charge when not in use. Charge the battery one or two days before use.
Battery life can be extended by turning the camera oﬀ when not in use.
Battery capacity decreases at low temperatures; a depleted battery may not function when cold. Keep a fully charged spare battery in a warm place and exchange as necessary, or keep the battery in your pocket or other warm place and insert it in the camera only when shooting. Do not place the battery in direct contact with hand warmers or other heating devices.
Charging the Batterie
The battery can be charged using the camera and supplied AC adapter or an optional BC-W235 dual battery charger. Charging times will increase at ambient temperatures below
Battery Life
A noticeable decrease in the length of time the battery will hold a charge indicates that it has reached the end of its service life and should be replaced.
If the battery is left for long periods without charging, you may fi nd that its quality degrades or that it no longer holds a charge. Charge the battery regularly.
Storage
If the camera will not be used for an extended period, store it at room temperature with the battery charged to approximately
one half to capacity.
If the camera will not be used for an extended period, remove the battery and store it in a dry place with an ambient temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do not store in locations exposed to extremes of temperature.
Cautions: Handling the Battery
- Do not transport or store with metal objects such as necklaces or hairpins.
- Do not expose to flame or heat.
- Do not disassemble or modify.
- Do not expose to low atmospheric pressures.
- Use with designated chargers only.
- Dispose of used batteries promptly.
- Do not drop or subject to strong physical shocks.
- Do not expose to water.
- Keep the terminals clean.
- The battery and camera body may become warm to the touch after extended use. This is normal.
Caution: Disposal
Dispose of used batteries in accord with local regulations.
Attention should be drawn to the environmental aspects of battery disposal. Use the apparatus under moderate climate.
Do not mechanically crush or split batteries.

AC Power Adapters

The AC power adapter is for indoor use only.
Be sure the cable is securely connected to the camera.
Turn the camera off before disconnecting the adapter. Disconnect the adapter by the plug, not the cable.
Do not disassemble.
Do not expose to high heat and humidity.
Do not subject to strong physical shocks.
The adapter may hum or become hot to the touch during use. This is normal.
If the adapter causes radio interference, reorient or relocate the receiving antenna.

Using the Camera

Do not aim the camera at extremely bright light sources, including artiﬁcial light sources or natural light sources such as the sun in a cloudless sky. Failure to observe this precaution could damage the camera image sensor.
Strong sunlight focused through the viewﬁnder may dam-age the panel of electronic viewﬁnder (EVF). Do not aim the electronic viewﬁnder at the sun.

Take Test Shots

Before taking photographs on important occasions (such as at weddings or before taking the camera on a trip), take a test shot and view the results to ensure that the camera is functioning normally. FUJIFILM Corporation cannot accept liability for damages or lost proﬁ ts incurred as a result of product malfunction.

Notes on Copyright
Unless intended solely for personal use, images recorded using your digital camera system cannot be used in ways that infringe copyright laws without the consent of the owner. Note that some restrictions apply to the photographing of stage performances, entertainments, and exhibits, even when intended purely for personal use. Users are also asked to note that the transfer of memory cards containing images or data protected under copyright laws is only permissible within the restrictions imposed by those copyright laws.

Handling
To ensure that images are recorded correctly, do not subject the camera to impact or physical shocks while images are being recorded.

Liquid Crystal
In the event that the display is damaged, care should be taken to avoid contact with liquid crystal. Take the urgent action indicated should any of the following situations arise:

If liquid crystal comes in contact with your skin, clean the area with a cloth and then wash thoroughly with soap and running water.
If liquid crystal enters your eyes, ﬂush the aﬀected eye with clean water for at least 15 minutes and then seek medical assistance.
If liquid crystal is swallowed, rinse your mouth thoroughly with water. Drink large quantities of water and induce vomiting, then seek medical assistance.

Although the display is manufactured using extremely high-precision technology, it may contain pixels that are always lit or that do not light. This is not a malfunction, and images recorded with the product are unaﬀected.

Trademark Information

Digital Split Image is a trademark or registered trademark of FUJIFILM Corporation. Digital Micro Prism is a trademark or registered trademark of FUJIFILM Corporation. The typefaces included herein are solely developed by DynaComware Tai-wan Inc. Apple, iPhone, iPad, Mac, Mac OS X, OS X, macOS, Lightning and Apple ProRes are registered trademarks of Apple Inc. in the U.S.A. and other countries. Windows is a registered trademark of Microsoft Corporation in the U.S.A. and other countries. Android is a trademark or registered trademark of Google LLC. Adobe, the Adobe logo, Photo-shop, and Lightroom are trademarks or registered trademarks of Adobe Systems Incorporated in the U.S.A. and other coun-tries. Wi-Fi®, the Wi-Fi CERTIFIED logo, and Wi-Fi Protected Setup® are registered trademarks of the Wi-Fi Alliance®. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc., and any use of such marks by Fujiﬁ lm is under license. The SDHC and SDXC logos are trademarks of SD-3C, LLC. CFexpress is a trademark of the CFA (CompactFlash Association). The HDMI logo is a trademark or registered trademark of HDMI Licensing LLC. All other trade names mentioned in this manual are the trademarks or registered trademarks of their respective owners.

Electrical Interference

This camera may interfere with hospital or aviation equipment. Consult with hospital or airline staﬀ before using the camera in a hospital or on an aircraft.

Color Television Systems

NTSC (National Television System Committee) is a color tele-vision telecasting speciﬁcation adopted mainly in the U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly in European countries and China.

Exit Print (Exit Version 2.32)
Exit Print is a newly revised digital camera ﬁ le format in which information stored with photographs is used for optimal col-or reproduction during printing.

IMPORTANT NOTICE: Read Before Using the Software

Direct or indirect export, in whole or in part, of licensed soft-ware without the permission of the applicable governing bodies is prohibited.

Lenses and Other Accessories

Use a screw 4.5 mm or shorter when attaching a tripod.
Fujiﬁlm will not be held liable for performance issues or damage caused by the use of third-party accessories.

NOTICES

To prevent fire or shock hazard, do not expose the unit to rain or moisture.
Please read the “Safety Notes” and make sure you understand them before using the camera. Perchlorate Material—special handling may apply. See:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate

For Customers in the U. S. A.

Tested To Comply With FCC Standards FOR HOME OR OFFICE USE
Contains IC : 10293A-WMBACBM25
Contains FCC ID : COF-WMBACBM25

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in con-junction with any other antenna or transmitter.
Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard for wireless device employs a unit of measurement known as the Speciﬁc Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certiﬁed power level in all tested frequency bands.
Notes on the Grant: To comply with Part 15 of the FCC Rules, this product must be used with a Fujiﬁlm-speciﬁed ferrite-core A/V cable, USB cable, and DC supply cord.

A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery.|
California Code of Regulations, Title 20, Di-vision 2, Chapter 4, Article 4, Appliance Efﬁciency Regulations, Sections 1601 through 1609

For Customers in Canada
CAN ICES-003 (B)/NMB-003(B)
CAUTION: This Class B digital apparatus complies with Canadian ICES-003.
Industry Canada statement: This device complies with Indus-try Canada’s licenceexempt RSSs. Operation is subject to the following two conditions:

This device may not cause interference; and
This device must accept any interference, including interference that may cause undesired operation of the device.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products marketed in the US/ Canada.
Radiation Exposure Statement: The available scientiﬁ c evi-dence does not show that any health problems are asso-ciated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health eﬀ ects (by heating tissue), exposure of low-level RF that does not produce heating eﬀ ects causes no known adverse health eﬀ ects. Many studies of low-level RF exposures have not found any biological eﬀ ects. Some studies have suggested that some biological eﬀ ects might occur, but such ﬁ ndings have not been conﬁ rmed by additional research. X-T5 has been tested and found to comply with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules.
Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Disposal of Electrical and Electronic Equipment in Private Households
In the European Union, Norway, Iceland and Liechtenstein: This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this product shall not be treated as household waste. Instead it should be taken to an applicable collection point for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
This symbol on the batteries or accumulators indicates that those batteries shall not be treated as household waste.
If your equipment contains easy removable batteries or accumulators please dispose these separately according to your local requirements.
The recycling of materials will help to conserve natural re-sources. For more detailed information about recycling this product, please contact your local city oﬃce, your household waste disposal service or the shop where you purchased the product.
In Countries Outside the European Union, Norway, Iceland and Liechtenstein: If you wish to discard this product, including the batteries or accumulators, please contact your local authorities and ask for the correct way of disposal.
In Japan: This symbol on the batteries indicates that they are to be disposed of separately.

Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.

Storage and Use
If the camera will not be used for an extended period, remove the battery and memory card. Do not store or use the camera in locations that are:

exposed to rain, steam, or smoke
very humid or extremely dusty
exposed to direct sunlight or very high temperatures, such as in a closed vehicle on a sunny day
extremely cold
subject to strong vibration
exposed to strong magnetic ﬁelds, such as near a broadcasting antenna, power line, radar emitter, motor, transformer, or magnet
in contact with volatile chemicals such as pesticides
next to rubber or vinyl products

Wireless Network and Bluetooth Devices: Cautions
This product complies with the following EU Directives:

RoHS Directive 2011/65/EU
RE Directive 2014/53/EU

Hereby, FUJIFILM Corporation declares that the radio equipment type FF220001 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://dl.fujifilm-x.com/global/products/cameras/x-t5/pdf/x-t5_doc-ysk.pdf
The full text of the UK declaration of conformity is available at the following internet address:
https://dl.fujifilm-x.com/en-gb/products/cameras/x-t5/pdf/x-t5_doc- ysk_uk.pdf
This compliance is indicated by the following conformity marking placed on the product:
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth®).

Maximum radio-frequency power (EIRP):
WLAN 2.4 GHz: 12.17 dBm
WLAN 5 GHz: 14.30 dBm
Bluetooth: 3.69 dBm
IMPORTANT: Read the following notices before using the camera’s built-in wireless transmitter.
Q This product, which contains encryption function developed in the United States, is controlled by the United States
Export Administration Regulations and may not be exported or re-exported to any country to which the United States embargoes goods.
Use only a wireless network or Bluetooth device. Fujifilm does not accept liability for damages resulting from unauthorized use. Do not use in applications requiring a high degree of reliability, for example in medical devices or other systems that may directly or indirectly impact human life. When using the device in computer and other systems that demand a greater degree of reliability than offered by wireless network or Bluetooth devices, be sure to take all necessary precautions to ensure safety and prevent malfunction.
Use only in the country in which the device was purchased. This device conforms to regulations governing wireless network and Bluetooth devices in the country in which it was purchased. Observe all location regulations when using the device. Fujifilm does not accept liability for problems arising from use in other jurisdictions.
Do not use the device in locations subject to magnetic Fifield’s, static electricity, or radio interference. Do not use the transmitter in the vicinity of microwave ovens or in other locations subject to magnetic fields, static electricity, or radio interference that may prevent reception of wireless signals. Mutual interference may occur when the transmitter is used in the vicinity of other wireless devices operating in the 2.4 GHz band..
The wireless transmitter operates in the 2.4 GHz and 5 GHz bands using DSSS, OFDM and GFSK modulation.
Security: Wireless network and Bluetooth devices transmit data via radio and consequently their use requires greater attention to security than applies in the case of wired networks.
- Do not connect to unknown networks or networks to which you do not have access rights, even if they are displayed on your device, as such access may be considered unauthorized. Connect only to networks to which you have access rights.
- Be aware that wireless transmissions may be vulnerable to interception by third parties.
- Do not connect this device directly to telecommunications networks (including public wireless LANs) operated by providers or mobile, landline, Internet, or other telecommunications services.
The following may be punishable by law:
- Disassembly or modification or this device
- Removal of device certification labels
This device operates on the same frequency as commercial, educational, and medical devices and wireless transmitters. It also operates on the same frequency as licensed transmitters and special unlicensed low-voltage transmitters used in RFID tracking systems for assembly lines and in other similar applications.
To prevent interference with the above devices, observe the following precautions. Confirm that the RFID transmitter is not in operation before using this device. Should you observe that the device causes interference in licensed transmitters used for RFID tracking, immediately stop using the affected frequency or move the device to another location. If you notice that this device causes interference in low-voltage RFID tracing systems, contact a Fujifilm representative.
Do not use this device on board an aircraft. When on an aircraft, follow the instructions of airline personnel. Note that this product may emit radio-frequency radiation even when off . This can be prevented by selecting ON for AIRPLANE MODE in the network/USB setting menu before boarding.
Requirements in AT/BE/BG/CZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/CY/LV/LI/LT/LU/HU/MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/ UK/HR. 5150 MHz–5350 MHz is for indoor use only.

Specific Absorption Rate (SAR) Information
SAR is measured with the device at 0 mm to the body, while transmitting at the highest certified output power level in all frequency bands of the device. The maximum SAR value is 0.093 W/kg (head/body) averaged over 10 gram of tissue.

U.K. Importer:
FUJIFILM UK Limited
Fujifilm House, Whitbread Way, Bedford, Bedfordshire, MK42 0ZE, United Kingdom

EU Importer:
FUJIFILM Electronic Imaging Europe GmbH
Fuji Strasse 1 47533 Kleve, Germany

Be sure to read these notes before using the lens

Safety Notes

Make sure that you use the lens correctly. Read these safety notes and the camera Basic Manual carefully before use.
After reading these safety notes, store them in a safe place.

About the Icons
The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the in-formation indicated by the icon is ignored and the product is used incorrectly as a result.

WARNING
This icon indicates that death or serious injury can result if the information is ignored.

CAUTION
This icon indicates that personal injury or material damage can result if the information is ignored.

The icons shown below are used to indicate the nature of the instructions which are to be observed.

Triangular icons tell you that this information requires attention (“Important”).
Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an action that must be performed (“Required”).

WARNING

Do not immerse in or expose to water. Failure to observe this precaution can cause a fi re or electric shock.
Do not disassemble (do not open the case). Failure to observe this precaution can cause fi re, electric shock, or injury due to product malfunction.
Should the case break open as the result of a fall or other accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged parts. Remove the battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation.
Do not place on unstable surfaces. The product may fall, causing injury.
Do not view the sun through the lens or camera viewfifinders. Failure to observe this precaution can cause permanent visual impairment.

CAUTION

| _ _Do__ not use or store in locations that are exposed to steam, or smoke or are very humid or extremely dust _ _y__ . Failure to observe this precaution can cause ﬁre or electric shock.
| _ _Do not leave in direct sunlight or in locations subjec__ t to very high temperatures, such as in a closed vehicle on a sunny day . Failure to observe this precaution can cause ﬁre.
| _ _Keep out of the reach of small children__ . This product could cause injury in the hands of a child.
| _ _Do__ not handle with wet hands . Failure to observe this precaution can cause electric shock.
| _ _Keep the sun out of the frame when shooting backli__ t subjects . Sunlight focused into the camera when the sun is in or close to the frame can cause ﬁre or burns.
| _ _When the product is not in use, rep__ _ _lace the lens caps and__ store out of direct sunlight . Sunlight focused by the lens can cause ﬁre or burns.
| _ _Do not carr__ _ _y the camera or__ _ _lens while they are attached__ to a tripod . The product can fall or strike other objects, causing injury.