FUJIFILM X-H2S Mirrorless Camera Instruction Manual
- June 1, 2024
- Fujifilm
Table of Contents
X-H2S Mirrorless Camera
Instruction Manual
IMPORTANT SAFETY INSTRUCTIONS
- Read Instructions: All the safety and operating instructions should be read before the appliance is operated.
- Retain Instructions: The safety and operating instructions should be retained for future reference.
- Heed Warnings: All warnings on the appliance and in the operating instructions should be adhered to.
- Follow Instructions: All operating and use instructions should be followed.
Installation
Power Sources: This video product should be operated only from the type
of power source indicated on the marking label. If you are not sure of the
type of power supply to your home, consult your appliance dealer or local
power company. For video products intended to operate from battery power, or
other sources, refer to the operating instructions.
Grounding or Polarization: This video product is equipped with a
polarized alternating-current line plug (a plug having one blade wider than
the other). This plug will fi t into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet,
try reversing the plug. If the plug should still fail to fi t, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose
of the polarized plug.
Alternate Warnings: This video product is equipped with a three-wire
grounding-type plug, a plug having a third (grounding) pin. This plug will
only fi t into a grounding-type power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the
grounding type plug.
Overloading: Do not overload wall outlets and extension cords as this can
result in a risk of fi re or electric shock.
Ventilation: Slots and openings in the cabinet are provided for
ventilation, to ensure reliable operation of the video product and to protect
it from overheating, and these openings must not be blocked or covered. The
openings should never be blocked by placing the video product on a bed, sofa,
rug, or other similar surface.
This video product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manufacturer’s
instructions have been ad- hered to. This video product should never be placed
near or over a radiator or heat register.
Attachments: Do not use attachments not recommended by the video product
manufacturer as they may cause hazards.
Water and Moisture: Do not use this video product near water—for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement,
or near a swimming pool, and the like.
Power-Cord Protection: Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items placed upon or against
them, paying particular atten- tion to cords at plugs, convenience
receptacles, and the point where they exit from the appliance.
Accessories: Do not place this video product on an unstable cart, stand,
tripod, bracket, or table. The video product may fall, causing serious injury
to a child or adult, and serious damage to the appliance. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufacturer, or
sold with the video product. Any mounting of the appliance should follow the
manufacturer’s instructions, and should use a mounting accessory recommended
by the manufac- turer.
An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
Antennas
Outdoor Antenna Grounding: If an outside antenna or cable system is
connected to the video product, be sure the an- tenna or cable system is
grounded so as to provide some protection against voltage surges and built-up
static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70,
provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding con- ductors, location of antenna discharge unit,
connection to grounding electrodes, and requirements for the grounding
electrode.
Power Lines: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
Use
Cleaning: Unplug this video product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Object and Liquid Entry: Never push objects of any kind into this video
product through openings as they may touch dangerous voltage points or short
out parts that could result in a fire or electric shock. Never spill liquid of
any kind on the video product.
Lightning: For added protection for this video product receiver during a
lightning storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the video product due to lightning and
power-line surges.
Service
Servicing: Do not attempt to service this video product yourself as
opening or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
Be sure to read these notes before use
Safety Notes
- Make sure that you use your camera correctly. Read these safety notes and your Basic Manual carefully before use.
- After reading these safety notes, store them in a safe place
About the Icons
The icons shown below are used in this document to indicate the severity of
the injury or damage that can result if the information indicated by the icon
is ignored and the product is used incorrectly as a result.
WARNING
This icon indicates that death or serious injury can result if the information
is ignored
CAUTION
This icon indicates that personal injury or material damage can result if the
information is ignored.
The icons shown below are used to indicate the nature of the instructions which are to be observed.
| Triangular icons tell you that this information requires attention
(“Important”).
---|---
| Circular icons with a diagonal bar tell you that the action indicated
is prohibited (“Prohibited”).
| Filled circles with an exclamation mark indicate an action that must be
performed (“Required”).
The symbols on the product (including the accesories) represent the following:
**** | AC |
---|---|
**** | DC |
Class II equipment (The construction of the product is double-insulated.) |
WARNING
Unplug from power socket| If a problem arises, turn the camera off , remove
the battery, disconnect the USB cable, and unplug the AC power adapter.
Continued use of the camera when it is emitting smoke, is emitting any unusual
odor, or is in any other abnormal state can cause a fi re or electric shock.
Contact your Fujifi lm dealer.
---|---
| Do not allow w er or foreign objects to enter the camera or connecting
cables
Do not use the camera or connecting cables following ingress of fresh or salt
water, milk, beverages, detergents, or other liquids.
Should liquid find its way into the camera or connecting cables, turn the
camera off , remove the battery, disconnect the USB cable, and disconnect and
unplug the AC adapter. Continued use of the camera can cause a fire or electric
shock. Contact your Fujifi lm dealer.
Do not use in the bathroom or shower| Do not use the camera in the bathroom or
shower. This can cause a fi re or electric shock.
Do not disassemble| Never attempt to change or take apart the camera (never
open the case). Failure to observe this precaution can cause fire or electric
shock
Do not touch internal parts| Should the case break open as the result of a
fall or other accident, do not touch the exposed parts. Failure to observe
this precaution could result in electric shock or in injury from touching the
damaged parts. Re- move the battery immediately, taking care to avoid injury
or electric shock, and take the product to the point of purchase for
consultation.
| Do not change, heat or unduly twist or pull the connection cord and do
not place heavy objects on the connection cord. These actions could damage the
cord and tion cor cause a fi re or electric shock. If the cord is damaged,
contact your Fujifi lm dealer. Do not use cables with bent connectors.
| Do not place the camera on an unstable surface. This can cause the
camera to fall or tip over and cause injury.
| Never attempt to take pictures while in motion. Do not use the camera
while walking or driving. This can result in you falling down or being
involved in a traffic accident.
| Do not touch any metal parts of the camera during a thunderstorm. This
can cause an electric shock due thunderst
to induced current from the lightning discharge.
| Do not use the battery except as specified. Load the battery as shown
by the indicator.
| Do not disassemble, modify, or heat batteries. Do not drop, strike, or
throw batteries or otherwise subject them to strong impacts. Do not use
batteries that show signs of leaking, deformation, discoloration, or other
abnormalities. Use only designated chargers to recharge rechargeable batteries
and do not attempt to recharge non-rechargeable Li-ion or alkaline batteries.
Do not short batteries or store them with metallic objects.
Failure to observe these precautions could result in the batteries
overheating, igniting, rupturing, or leaking, causing fire, burns, or other
injury.
| Use only batteries or AC power adapters specified for use with this
camera. Do not use voltages other than the power supply voltage shown. The use
of other power sources can cause a fire.
| If the battery leaks and fluid gets in contact with your eyes, skin or
dothing, flush the affected area with dean water and seek medical attention or
call an emergency number right away.
| Do not use the charger to charge batteries other than those specified
here. The supplied charger is for use only with batteries of the type supplied
with the camera. Using the charger to charge conventional batteries or other
types of rechargeable batteries can cause the battery to leak, overheat or
burst.
| Using a flash too close to a person’s eyes may cause visual impairment.
Take particular care when pho- tographing infants and young children.
| Do not remain in prolonged contact with hot surfaces.
Do not leave one part of the body in contact with the product for prolonged
periods while the product is on.
Failure to observe this precaution could result in low-temperature burns,
particularly during prolonged use, at high ambient temperatures, when HIGH is
selected for AUTO POWER OFF TEMP., or with users who suffer from poor
circulation or reduced sensation, in which case use of a tripod or similar
precautions are recommended.
| Do not use in the presence of flammable objects, explosive gases, or
dust.
| When carrying the battery, install it in a digital camera or keep it in
the hard case. When storing the battery, keep it in the hard case. When
discarding, cover the battery terminals with insulation tape. Contact with
other metallic objects or batteries could cause the battery to ignite or
burst.
| Keep memory cards, hot shoes, and other small parts out of the reach of
small children, Children may swallow small parts; keep out of reach of
children. Should a child swallow a small part, seek medical attention or call
emergency.
| Keep out of reach of small children. Among the elements that could
cause injury are the strap, which could become entangled about a child’s neck,
causing strangulation, and the flash, which could cause visual impairment.
| Follow the directions of airline and hospital personnel.
This product generates radio-frequency emissions that could interfere with
navigational or medical equipment.
CAUTION
| Do not use this camera in locations affected by oil fumes, steam,
humidity or dust. This can cause a fire or electric shock.
---|---
| Do not leave this camera in places subject to extremely high
temperatures. Do not leave the camera in locations such as a sealed vehicle or
in direct sunlight. This can cause a fire.
| Do not place heavy objects on the camera. This can cause the heavy
object to tip over or fall and cause injury.
| Do not move the camera while the AC power adapter is still connected.
Do not pull on the connection cord to disconnect the AC power adapter. This
can damage the power cord or cables and cause a fire or electric shock.
| Do not cover or wrap the camera or the AC power adapter in a cloth or
blanket. This can cause heat to build up and distort the casing or cause a
fire.
| Do not use the plug if it is damaged or if it does not fit securely
into the outlet. Failure to observe this precaution could result in fire or
electric shock.
| When you are cleaning the camera or you do not plan to use the camera
for an extended period, remove the battery and disconnect and unplug the AC
power adapter. Failure to do so can cause a fire or electric shock.
| When charging ends, unplug the charger from the power socket. Leaving the
charger plugged into the power socket can cause a fire.
| When a memory card is removed, the card could come out of the slot too
quickly. Use your finger to hold it and gently release the card. Injury could
result to those struck by the ejected card.
| Do not handle the memory card immediately after shooting. The memory card
may be hot, resulting in burns. Wait for the card to cool before removing it
from the camera.
| Request regular internal testing and cleaning for your camera. Build-up of
dust in your camera can cause a fire or electric shock. Contact your Fujifilm
dealer to request internal cleaning every two years. Please note that this
service is not free of charge.
****| Dispose of the product in accord with location regulations.
| Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
| Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
The Battery and Power Supply
Note: Check the type of battery used in your camera and read the
appropriate sections.
WARNING: Battery shall not be exposed to excessive heat such as sunshine,
fire or the like.
The following describes the proper use of batteries and how to prolong their
life. Incorrect use can shorten battery life or cause leakage, overheating, fi
re, or explosion.
Li-ion Batteries
Read this section if your camera uses a rechargeable Li-ion battery.
The battery is not charged at shipment. Charge the battery before use. Keep
the battery in its case when not in use.
Notes on the Battery
The battery gradually loses its charge when not in use.
Charge the battery one or two days before use.
Battery life can be extended by turning the camera off when not in use.
Battery capacity decreases at low temperatures; a depleted battery may not
function when cold. Keep a fully charged spare battery in a warm place and
exchange as necessary, or keep the battery in your pocket or other warm place
and insert it in the camera only when shooting. Do not place the battery in
direct contact with hand warmers or other heating devices.
Charging the Battery
The battery can be charged using the camera and supplied AC adapter or an
optional BC-W235 dual battery charger.
Charging times will increase at ambient temperatures below +10 °C (+50 °F) or
above +35 °C (+95 °F). Do not attempt to charge the battery at temperatures
above +40 °C (+104 °F); at temperatures below +5 °C (+41 °F), the battery will
not charge.
Do not attempt to recharge a fully charged battery. The battery does not
however need to be fully discharged before charging.
The battery may be warm to the touch immediately after charging or use. This
is normal.
Battery Life
A noticeable decrease in the length of time the battery will hold a charge
indicates that it has reached the end of its service life and should be
replaced.
If the battery is left for long periods without charging, you may fi nd that
its quality degrades or that it no longer holds a charge. Charge the battery
regularly.
Storage
If the camera will not be used for an extended period, store it at room
temperature with the battery charged to approximately one half to 2⁄3
capacity.
If the camera will not be used for an extended period, remove the battery and
store it in a dry place with an ambient temperature of from +15 °C to +25 °C
(+59 °F to +77 °F). Do not store in locations exposed to extremes of
temperature.
■ Cautions: Handling the Battery
- Do not transport or store with metal objects such as necklaces or hairpins.
- Do not expose to fl ame or heat.
- Do not disassemble or modify.
- Do not expose to low atmospheric pressures.
- Use with designated chargers only.
- Dispose of used batteries promptly.
- Do not drop or subject to strong physical shocks.
- Do not expose to water.
- Keep the terminals clean.
- The battery and camera body may become warm to the touch after extended use. This is normal.
■ Caution: Disposal
Dispose of used batteries in accord with local regulations.
Attention should be drawn to the environmental aspects of battery disposal.
Use the apparatus under moderate climate.
Do not mechanically crush or split batteries.
AC Power Adapters
- The AC power adapter is for indoor use only.
- Be sure the cable is securely connected to the camera.
- Turn the camera off before disconnecting the adapter. Disconnect the adapter by the plug, not the cable.
- Do not disassemble.
- Do not expose to high heat and humidity.
- Do not subject to strong physical shocks.
- The adapter may hum or become hot to the touch during use. This is normal.
- If the adapter causes radio interference, reorient or relocate the receiving antenna.
- Do not aim the camera at extremely bright light sources, including artifi cial light sources or natural light sources such as the sun in a cloudless sky. Failure to observe this precaution could damage the camera image sensor.
- Strong sunlight focused through the viewfi nder may damage the panel of electronic viewfi nder (EVF). Do not aim the electronic viewfi nder at the sun.
Take Test Shots
Before taking photographs on important occasions (such as at weddings or
before taking the camera on a trip), take a test shot and view the results to
ensure that the camera is functioning normally. FUJIFILM Corporation cannot
accept liability for damages or lost profits incurred as a result of product
malfunction.
Notes on Copyright
Unless intended solely for personal use, images recorded using your digital
camera system cannot be used in ways that infringe copyright laws without the
consent of the own- er. Note that some restrictions apply to the photographing
of stage performances, entertainments, and exhibits, even when intended purely
for personal use. Users are also asked to note that the transfer of memory
cards containing images or data protected under copyright laws is only
permissible within the restrictions imposed by those copyright laws.
Handling
To ensure that images are recorded correctly, do not subject the camera to
impact or physical shocks while images are being recorded.
Liquid Crystal
In the event that the display is damaged, care should be taken to avoid
contact with liquid crystal. Take the urgent action indicated should any of
the following situations arise:
- If liquid crystal comes in contact with your skin, clean the area with a cloth and then wash thoroughly with soap and running water.
- If liquid crystal enters your eyes, fl ush the aff ected eye with clean water for at least 15 minutes and then seek medical assistance.
- If liquid crystal is swallowed, rinse your mouth thoroughly with water. Drink large quantities of water and induce vomiting, then seek medical assistance.
Although the display is manufactured using extremely high-precision technology, it may contain pixels that are always lit or that do not light. This is not a malfunction, and images recorded with the product are unaff ected.
Trademark Information
Digital Split Image is a trademark or registered trademark of FUJIFILM
Corporation. Digital Micro Prism is a trademark or registered trademark of
FUJIFILM Corporation. The typefaces included herein are solely developed by
DynaComware Taiwan Inc. Apple, iPhone, iPad, Mac, Mac OS X, OS X, macOS,
Lightning and Apple ProRes are registered trademarks of Apple Inc. in the
U.S.A. and other countries. Windows is a registered trademark of Microsoft
Corporation in the U.S.A. and other countries. Android is a trademark or
registered trademark of Google LLC. Adobe, the Adobe logo, Photoshop, and
Lightroom are trademarks or registered trademarks of Adobe Systems
Incorporated in the U.S.A. and other countries. Wi-Fi®, the Wi-Fi CERTIFIED
logo, and Wi-Fi Protected Setup® are registered trademarks of the Wi-Fi
Alliance®. The Bluetooth® word mark and logos are registered trademarks owned
by the Bluetooth SIG, Inc., and any use of such marks by Fujifi lm is under
license. The SDHC and SDXC logos are trademarks of SD-3C, LLC. CFexpress is a
trademark of the CFA (CompactFlash Association). The HDMI logo is a trademark
or registered trademark of HDMI Licensing LLC. All other trade names mentioned
in this manual are the trademarks or regis- tered trademarks of their
respective owners.
Electrical Interferenc
This camera may interfere with hospital or aviation equipment. Consult with
hospital or airline staff before using the camera in a hospital or on an
aircraft.
Color Television Systems
NTSC (National Television System Committee) is a color television telecasting
specifi cation adopted mainly in the U.S.A., Canada, and Japan. PAL (Phase
Alternation by Line) is a color television system adopted mainly in European
countries and China.
Exif Print (Exif Version 2.32)
Exif Print is a newly revised digital camera fi le format in which information
stored with photographs is used for optimal color reproduction during
printing.
IMPORTANT NOTICE: Read Before Using the Software
Direct or indirect export, in whole or in part, of licensed software without
the permission of the applicable governing bodies is prohibited.
Lenses and Other Accessories
- Use a screw 4.5 mm or shorter when attaching a tripod.
- Fujifi lm will not be held liable for performance issues or damage caused by the use of third-party accessories.
NOTICES
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
Please read the “Safety Notes” and make sure you understand them before using
the camera.
Perchlorate Material—special handling may apply. See:
http://www.dtsc.ca.gov/hazardouswaste/perchlorate
For Customers in the U. S. A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
Contains IC : 10293A-WMBACBM25
Contains FCC ID : COF-WMBACBM25
FCC Statement: This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifi cations not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard for wireless device employs a unit of measurement known
as the Specifi c Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using
standard operating positions accepted by the FCC with the device transmitting
at its highest certifi ed power level in all tested frequency bands.
Notes on the Grant: To comply with Part 15 of the FCC Rules, this product must
be used with a Fujifi lm-specifi ed ferrite-core A/V cable, USB cable, and DC
supply cord.
| A lithium ion battery that is recyclable powers the product you have
purchased. Please call 1-800-8-BATTERY for information on how to recycle this
battery.
---|---
| California Code of Regulations, Title 20, Di- vision 2, Chapter 4, Article
4, Appliance Ef- ficiency Regulations, Sections 1601 through 1609
For Customers in Canada
CAN ICES-003 (B)/NMB-003(B)
CAUTION: This Class B digital apparatus complies with Canadian ICES-003.
Industry Canada statement: This device complies with Industry Canada’s
licence-exempt RSSs. Operation is subject to the following two conditions: (1)
This device may not cause in- terference; and (2) This device must accept any
interference, including interference that may cause undesired operation of
the device.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter, except tested built-in
radios. The County Code Selection feature is disabled for products marketed in
the US/ Canada.
Radiation Exposure Statement: The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological eff ects might occur, but such findings have not been confi rmed by additional research. X-H2S has been tested and found to comply with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Disposal of Electrical and Electronic Equipment in Private Households
In the European Union, Norway, Iceland and Liechtenstein:
This symbol on the product, or in the manual and in the warranty, and/or
on its packaging indicates that this product shall not be treated as household
waste. Instead it should be taken to an applicable collection point for the
recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences to the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product.
This symbol on the batteries or accumulators indicates that those
batteries shall not be treated as household waste.
If your equipment contains easy removable batteries or accumulators please
dispose these separately according to your local requirements.
The recycling of materials will help to conserve natural resources. For more
detailed information about recycling this product, please contact your local
city offi ce, your household waste disposal service or the shop where you
purchased the product.
In Countries Outside the European Union, Norway, Iceland and Liechtenstein: If
you wish to discard this product, including the batteries or accumulators,
please contact your local authorities and ask for the correct way of disposal.
In Japan: This symbol on the batteries indicates that they are to be disposed
of separately.
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Storage and Use
If the camera will not be used for an extended period, remove the battery and
memory card. Do not store or use the camera in locations that are:
- exposed to rain, steam, or smoke
- very humid or extremely dusty
- exposed to direct sunlight or very high temperatures, such as in a closed vehicle on a sunny day
- extremely cold
- subject to strong vibration
- exposed to strong magnetic fi elds, such as near a broadcasting antenna, power line, radar emitter, motor, transformer, or magnet
- in contact with volatile chemicals such as pesticides
- next to rubber or vinyl products
Wireless Network and Bluetooth Devices: Cautions
This product complies with the following EU Directives:
- RoHS Directive 2011/65/EU
- RE Directive 2014/53/EU
Hereby, FUJIFILM Corporation declares that the radio equipment type FF210002
is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
https://dl.fujifilm-x.com/global/products/cameras/x-h2s/pdf/x-h2s_doc-
nkt.pdf
The full text of the UK declaration of conformity is available at the
following internet address: https://dl.fujifilm-x.com/en-
gb/products/cameras/x-h2s/pdf/x-h2s_doc-nkt_uk.pdf
This compliance is indicated by the following conformity marking placed on the
product:
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth®).
- Maximum radio-frequency power (EIRP):
WLAN 2.4 GHz: 10.81 dBm
WLAN 5 GHz: 12.56 dBm
Bluetooth: 1.86 dBm
IMPORTANT: Read the following notices before using the camera’s built-in
wireless transmitter.
**** This product, which contains encryption function developed in the United
States, is controlled by the United States Export Administration Regulations
and may not be exported or re-exported to any country to which the United
States embargoes goods.
-
Use only a wireless network or Bluetooth device. Fujifilm does not accept liability for damages resulting from unauthorized use. Do not use in applications requiring a high degree of reliability, for example in medical devices or other systems that may directly or indirectly impact human life. When using the device in computer and other systems that demand a greater degree of reliability than offered by wireless network or Bluetooth devices, be sure to take all necessary precautions to ensure safety and prevent malfunction.
-
Use only in the country in which the device was purchased. This device conforms to regulations governing wireless network and Bluetooth devices in the country in which it was purchased. Observe all location regulations when using the device. Fujifilm does not accept liability for problems arising from use in other jurisdictions.
-
Do not use the device in locations subject to magnetic fields, static electricity, or radio interference. Do not use the transmitter in the vicinity of microwave ovens or in other locations subject to magnetic fields, static electricity, or radio interference that may prevent reception of wireless signals. Mutual interference may occur when the transmitter is used in the vicinity of other wireless devices operating in the 2.4 GHz band.
-
The wireless transmitter operates in the 2.4 GHz and 5 GHz bands using DSSS, OFDM and GFSK modulation.
-
Security: Wireless network and Bluetooth devices transmit data via radio and consequently their use requires greater atten- tion to security than applies in the case of wired networks.
– Do not connect to unknown networks or networks to which you do not have access rights, even if they are displayed on your device, as such access may be considered unauthorized. Connect only to networks to which you have access rights.
– Be aware that wireless transmissions may be vulnerable to interception by third parties.
– Do not connect this device directly to telecommunications networks (including public wireless LANs) operated by providers or mobile, landline, Internet, or other telecommunications services. -
The following may be punishable by law:
– Disassembly or modification or this device
– Removal of device certification labels -
This device operates on the same frequency as commercial, educational, and medical devices and wireless transmitters. |t also oper- ates on the same frequency as licensed transmitters and special unlicensed low-voltage transmitters used in RFID tracking systems for assembly lines and in other similar applications.
-
To prevent interference with the above devices, observe the following precautions. Confirm that the RFID transmitter is not in operation before using this device. Should you observe that the device causes interference in licensed transmitters used for RFID tracking, immediately stop using the affected frequency or move the device to another location. If you notice that this device causes interference in low-voltage RFID tracing systems, contact a Fujifilm representative.
-
Donotuse this device on board an aircraft. When on an aircraft, follow the instructions of airline personnel. Note that this product may emit radio-frequency radiation even when off. This can be prevented by selecting ON for AIRPLANE MODE in the network/USB setting menu before boarding.
-
Requirements in AT/BE/BG/CZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/CY/LV/LI/LT/LU/HU/MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/UK/HR. 5150 MHz-5350 MHz is for indoor use only.
Specific Absorption Rate (SAR) Information
SAR is measured with the device at 0 mm to the body, while transmitting at the
highest certifi ed output power level in all frequency bands of the device. The
maximum SAR value is 0.235 W/kg (head/body) averaged over 10 gram of tissue.
U.K. Importer:
FUJIFILM UK Limited
Fujifi lm House, Whitbread Way, Bedford, Bedfordshire, MK42 0ZE, United Kingdom
EU Importer:
FUJIFILM Electronic Imaging Europe GmbH
Fujistrasse 1 47533 Kleve, Germany
Be sure to read these notes before using the lens
Safety Notes
- Make sure that you use the lens correctly. Read these safety notes and the camera Basic Manual carefully before use.
- After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the severity of
the injury or damage that can result if the information indicated by the icon
is ignored and the product is used incorrectly as a result.
WARNING| This icon indicates that death or serious injury can result if
the information is ignored,
---|---
CAUTION| This icon indicates that personal injury or material damage can
result if the information is ignored.
The icons shown below are used to indicate the nature of the instructions which are to be observed.
| Triangular icons tell you that this information requires attention
(“Important”).
---|---
| Circular icons with a diagonal bar tell you that the action indicated
is prohibited (“Prohibited’).
| Filled circles with an exclamation mark indicate an action that must be
performed (“Required’).
WARNING
Do not immerse| Do not immerse in or expose to water. Failure to observe this
precaution can cause a fire or electric shock.
---|---
Do not disassemble| Do not disassemble (do not open the case). Failure to
observe this precaution can cause fire, electric shock, or injury due to
product malfunction.
Do not touch internal parts| Should the case break open as the result of a
fall or other accident, do not touch the exposed parts, Failure to observe
this precaution could result in electric shock or in injury from touching the
damaged parts. Re.move the battery immediately, taking care to avoid injury or
electric shock, and take the product to the point of purchase for
consultation.
| Do not place on unstable surfaces. The product may fall, causing
injury.
| Do not view the sun through the lens or camera view finders. Failure to
observe this precaution can cause permanent visual impairment.
CAUTION
| Do not use or store in locations that are exposed to steam, or smoke or
are very humid or extremely dusty. Failure to observe this precaution can
cause fire or electric shock.
---|---
| Do not leave in direct sunlight or in locations subject to very high
temperatures, such as in a closed vehicle ona sunny day. Failure to observe
this precaution can cause fire.
| Keep out of the reach of small children. This product could cause
injury in the hands of a child.
| Do not handle with wet hands. Failure to observe this precaution can
cause electric shack.
| Keep the sun out of the frame when shooting backlit subjects. Sunlight
focused into the camera when _ the sun is in or close to the frame can cause
fire or burns.
| When the product is not in use, replace the lens caps and store out of
direct sunlight. Sunlight focused by the ‘ lens can cause fire or burns.
****| Do not carry the camera or lens while they are attached toa tripod, The
product can fall or strike other ob- jects, Causing injury.
WARNING
- INGESTION HAZARD: This product contains a button cell or coin battery.
- DEATH or serious injury can occur if ingested.
- A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
- KEEP new and used batteries OUT OF REACH of CHILDREN
- Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
Notes on the Buit-in Battery
-
This product contains a non-replaceable battery.
-
The compatible battery type: MS621R
-
The nominal battery voltage: 3V
-
Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children.
Do NOT dispose of batteries in household trash or incinerate. -
Even used batteries may cause severe injury or death.
-
Call a local poison control center for treatment information.
-
Do not force discharge, disassemble, heat above 60 °C or incinerate.
Doing so may result in injury due to vending, leakage or explosion resulting in chemical burns.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>