BCS 85.400.001 Soap Injector Kit for Pressure Washer User Manual
- June 3, 2024
- BCS
Table of Contents
BCS 85.400.001 Soap Injector Kit for Pressure Washer
SUBJECT
SWITCHING HOSE AND PUMP FITTINGS IN ORDER TO INSTALL SOAP INJECTOR KIT ON THE BCS PRESSURE WASHER.
INSTALLATION INSTRUCTIONS
The BCS Pressure Washer includes a hose that is fitted with one male and one female connector on each end. The Pressure Washer’s pump is fitted with a male connector (see figure 1).
In order to install the Soap Injector Kit with the flow of water going in the correct direction (figure 2), the female connector from the hose and the male connector from the pump need to be exchanged (figure 3).
Once the two connectors are exchanged, the Soap Injector Kit can
be installed between the pump and the hose (figure 4).
If you have questions, please contact BCS America at 1-800-543-1040, or email info@bcsamerica.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>